Keyless Option Remote Car Key Fob Shell Case For Suzuki (KBRTS005)

Just as described

Assembled with all parts provided. When pressing the case together the buttons are pressed into activate mode. Had to grind the buttons raised rests (inside face plate) almost flat to let the buttons release. Tried mixing old parts with new before modifying with no success. Use a very small burr and a lot of knife scraping to accomplish the relief. Good luck if you buy.

The price was right and they look just like the original. But I could not force the coin cell intoplace. With some carving with an exacto knife I was able to make it work. Also, be sure to transferthe electric connecter strip from the old back cover, you will need to carve of the holding tab.

Me agrado la puntualidad

So it's functional but like some other reviewers I had an issue with when you snap it all together the buttons were being held down. I resolved this by removing the plastic button covers but now the buttons aren't labeled. Still better than the broken remotes. Oh and I tried moving the buttons from the original remote too and the same issue. Seems the problem is with the hard plastic housing. I rebuilt 2 remotes and the same problem was on both the new cases.

Exactly what we need it as our old fob was falling into pieces. Just put the hardware in and worked like a charm.

It doesn’t tell you that you have to remove the silver battery piece inside your current case to get this to work, which is near impossible without ruining it. Plus when I did manage to do that, when I put a battery in and closed it up, I couldn’t press the lock button down. Took it apart multiple times to see what I did wrong and even asked a friend. Decided to try and mix the old and new since I really only needed the back, and it worked. It’s super cheap quality. I’d buy one that is programmable and just go that way. I’m actually looking into one because I’d like to have a pair for my car.

I was trying to transfer innards of my remote to the new shell. if I all new shell like front and back the control doesn't work I had to settle old front and new back if not it will not work luckily my old front shell is not damaged only the back part.

These replacement shells look good, but there are a few differences in them from the originals that render them useless. So the original buttons and rubber are integrated into one piece, whereas the replacements feature a rubber with plastic buttons. The extra thickness from the plastic buttons means that when the fob is assembled, everything is too tight together and you can't press the buttons. Luckily I was able to mix and match pieces from the old fob with the new fob to create something that worked, but as a product out of the box, these replacements were entirely useless.

You can transfer the guts from your old remote

No tienes la misma secuencia, dentro.

Muy mala calidad de plástico, no ajustan los botones que debes usar del control anterior, solo pide usar una tapa con el control anterior pero quedan muy justos o apretados los botones.