Blisstime 6 String Acoustic Guitar Bone Bridge Saddle and Nut and 6pcs Ebony Guitar Bridge Pins

These bridge pins are a definite upgrade to my Takamine. Real Ebony inlaid with brass and abalone. The abalone and it's size match my fret marker inlays and the sound hole purfling. The shiney brass compliments the gold finish of my tuners. I think the dark ebony goes far better with my rosewood bridge than your typical ivory color and mut h better than plastic. The tone is better. The feeling on my hand is better. It did take some light sanding to get them to have the perfect fit for my guitar. Not much. I used a 4 sided nail buffer I got off Amazon for polishing frets. I then rubbed them with a thin coat of mineral pilt to seal the wood again. I haven't used the nut or saddle but both are bleached cow bone and give a satisfying plunk when they dropped onto my table. They are both cut and crafted well. Because of Takamines proprietary undersaddle piezo, I won't be using the saddle with the guitar but will probably install it onto my lower teir Yamaha and give it some new life. Same with the nut, although I have considered installing it on my Takamine, but it plays absolutely perfect with 'low' electric style action and I don't want to change the playability. These are so simple to use. You do not have to be a luthier to adjust and install these. Honestly, they will work right out of rhe package, but for a nice, low, flush and tight fit, it is best to sand to fit. Ebony is a strong hard wood. I expect with care, these will last a very long time. Worth every penny and highly recommend.

I was getting some buzzing on the higher strings above the 12th fret so decided to try a new bone saddle. This kit did the trick! The saddle pins especially are a nice touch with the abalone accents and match my guitar nicely.

I fitted these onto my Fender dreadknot and they have really changed the sound for the better. They all took a little bit of sanding to fit perfectly but in the end it really wasn’t much work. The nut was the perfect size, and fit even better than the original plastic one. The saddle was just a hair too long and tall, so I took it in on either side, and down a bit. The bridge pins are beautiful and we’re just a little too thick, but fit fine after some light sanding. They look and play great!

Very pleased with the pins (see photo). Real bone. Didn't install the nut or bridge yet, but I will come back later on them with an update. The pins are a bit taller than the original plastic ones (the guitar is a late 90's Guild True American DCE-1) but look amazing and I think they brought very nice notes to an already pretty good sounding guitar. Very happy with them. Again, once I have the nut and bridge installed, I will make an update. So far, very recomended.

This little bundle has really good quality. I have not used the saddle or nut on any guitars yet but it's good sturdy bleached bone, I'm sure it will work nicely if I ever get around to using them. The pins look great! I had to sand each one of them however, it was not a perfect fit. I half expected this though and was ready to sand them down a bit. Once they were all sanded a bit they went in nicely. I'm very happy with the pins they look great!

Put this nut, saddle, and pin set on a mono price Idyllwild hundred dolla cedar top acoustic. Could not have asked for a better match! The nut was perfect replacement fit in all dimensions but for a fraction of a millimeter on each end too wide that sanded down to size easily. Compensated saddle was also a drop-in replacement for the stock plastic, but I took the height down a couple mm for action adjust. Bridge pins look nice, like in the listing pics, but also required a few swipes of a file for a snug but not forced fit. These adjustments are not complaints, I'm glad they arrived a hair too large, because you can take some off but you can't add it. I feel like the guitar went from "nice" to "very nice!" This DIY upgrade was worth several times it's price in my eyes and ears. (remember to wear a mask when sanding bone or ebony as the particulates are unhealthy to inhale)

bought a budget acoustic and had the typical plastic bridge, nut and pins on it, so i figured I would take a shot on this for the price. fits perfect and the tone changed and got brighter, not tinny but a drastic improvement in clarity and sustain wow. thanks! Worth every penny.

I brought this for my gs mini out of the package the nut and saddle doesn't fit you have to cut a lot off the nut and saddle to make it fit in on the plus side the sound of bone is good and ebony pegs fit fine just the abalone inlay is a crap shoot one of the two sets look ok enough. I had to end up taking it my local shop and have it done right I mean it had to take anywhere from 2-4 mm off but once done by my shop guitar sounds great no more overly bright sound compared to original new bone and tusk nut and saddle it came with. Hind sight it would of been much easier to buy a direct fit one from and online auction site that you can drop in or elsewhere.

Excellent replacement bridge saddle and pins for a fender paramount series acoustics. Saddle was slightly larger than the slot so a quick light sanding on both ends of the saddle and it fits perfectly. The bridge Pins are an excellent fit and look great!

I pins (o piroli che siano) venduti come EBANO sembrano essere in materiale plastico, anche se di buona fattura e belli al tatto

Not sure if bone or ebony, likely plastic, but well made and were prefect replacement on my guitar. Filed down to my preferred action and the detailing on the bridge pins make them look very good. Very happy and guitar has a new lease of life.

Mejora el sonido de forma perceptible. Agudos más redondos y definidos. Perfecto!!

good salesman, good stuff