Meross MSS426 Smart Extension Lead Works with Alexa and Google Home

I have two of these purchased in 2022 and 2024 and am about to buy a third. They are easy to set up via the app and have integrated perfectly with Alexa. I think one of them may have disconnected once in the four years I have been using them so reliability has not been an issue. Would recommend to anyone looking for a smart powerstrip.

Excellent smart power strip with loads of useful features. Setup was quick and straightforward with the app, and being able to control each outlet individually is incredibly handy for a desk setup or home office.The USB ports are a great addition and save having loads of separate plugs everywhere. Works reliably with voice assistants and schedules, so it’s perfect for automating lights, chargers, or other devices.Build quality feels solid and the spacing between plugs is good too, which sounds small but makes a big difference with larger adapters. Very happy with it overall.

The desire was to get such an extension lead with the ability to control the devices being bugged in , remotely . This is because I intended to put it on the floor behind my equipments , and it would hard to reach them every time I wanted to switch on on or off .. That’s in addition to have some features " smart ones"Initially, it was easy to set it up and connect it to my Wi-Fi network. Later one I discovered that every time you switch it off or unplug the extension lead , it looses it refuses to reconnect to my router . I had to reset it and reconfigure it again .Smart features are limited as a stand alone device and relying on its App. I contacted Amazon about the issue of connectivity and they sent me a replacement . The new one had the same issue . This lead me to investigate the matter in depth . I reached to a conclusion that this extension lead has a manufacturer issue with regards to connecting to Virgin Media router . Despite knowing that Virgin routers are crap ! , they connect to devices without any issues as long as its within the Wi-Fi range . The extension lead is 2 m a way from the router, so the range is not an issue here . I had to bring an access point between my router and the lead be able to connect it to my Wi-Fi network . Its not ideal isn’t it !

I bought the 6 plug 4 USB extension lead.I will describe below what I think and also how to set it up and link it to Amazon and some basic uses, though not all, because you don't get instructions...It arrived next day with prime.It has a good length lead, very sturdy lead too.Set up;Set up was quite easy but instructions were non existent, all that was in the box was a warranty slip (2 years) and a piece of paper yelling you to download the app, I even downloaded the PDF called " user guide" from within the app...it was just a PDF of the same piece of paper with nothing useful on it at all, so as there is really no information given I will outline the steps here if it might help someone;1: make a note of your broadband password, you will need it.2: Download the app from Apple or Google Play store, search for "MEROSS"3: ensure location and Bluetooth are enabled on your phone ( just for the set up, you can turn those off after setup and it still works fine)4: create an account in the app.5: pick a socket near your broadband for the set up, you can move it later.6: go to the Homescreen of the app by pressing the house symbol bottom left, and the press the plus sign (+) top right corner to add your new device and follow the instructions.important: this 6 plug extension lead is listed as "surge protector", and then scroll down to the model number which is written on the top left corner of the front of the box.Set up is simple, switch on the socket when the app tells you, agree to the temporary Internet connection with a weird name ( connects automatically when you say yes, and then drops it later when you add your broadband info, this is pretty standard, my Google, Amazon and other smart items all do the same), enter your broadband password when asked) wait for it to pair, and then give it a name.Using:If you want to use Alexa to control the socket, allow linking with Alexa when the meross app asks for it.Then go to your Alexa app and you should, if you have the 6 plug, see 8 new devices listed, the extension as a whole, the 6 individual sockets, and all the usbs as a single USB switch.You cannot control the usbs individually, it does say that in the item listing information, but you can control the plug sockets individually.Go back to the meross app, click on your now listed device, it brings up a control Menü for you to control in the app, click the three lines top right which gives a new page and at the top where it says " device name" and lists the name you give it, click the right-hand arrow..This loads a new page and allows you to name each socket individually, by giving each an individual name you can use voice control on Alexa to turn each on and off without opening any apps.You can, once you have done this, groups some or all sockets into a group on Alexa, so instead of saying " Alexa turn on socket one, Alexa turn on socket two" etc, you can turn on 4 sockets for example ( or off) at once by saying, for example " Alexa turn off Hifi", if you named that group hifi Alexa will be able to control it.Timings:In the meross app or Alexa ( I haven't tried Google yet, even thought it gave me a button to click to link it, I went alphabetically so did Alexa and then when I went back to the meross app I couldn't find an option yet to link it to Google as well, it must be there somewhere though).So, in both the meross app and/ or Alexa you can set timings,For example if you want the radio to come on at 6 am, if you plug it into this extension lead, you can set timings.One is called sunrise/ sunset in the meross app and Alexa, and in Alexa you can also set it up any time you like.Say you go to bed and want to turn everything off, but you want your phone to charge between midnight and 4 am, a four hour charge, and then power off again, simply set that up in Alexa for that socket.It's all very clever, I am sure there are more features I haven't used yet, if anyone knows where the " link with Google" setting is in the app I would be grateful to know.One last thing, you can of course turn the sockets on and off as and when you choose through the meross app, and as long at you leave the Internet on and connected, you could turn everything on or off whilst you are away from home, like on holiday, as long as your phone connects to the Internet wherever you are, and at the same time back home the Internet is on, you can freak out the neighbors turning the lights on and off from Australia....not that you would do that, of course.I hope this waffle is helpful to some.

I've been using two Energenie 4 gang smart strips to control my media set up, plus a few Energenie smart plugs for other devices. The Energenie system requires their control hub, needing an Ethernet connection close to a router (or an Ethernet hub) and for their server to be up online. That proves problematic and somewhat frustratingly slow compared to other smart plugs.So... I've replaced them with a Meross 6 & a 4 gang strips. These importantly work without a hub (as per T Link, Kasa, Techin, Amazon plugs etc), appear very responsive and give me 2 additional sockets and 4 USBs .... one handy for that LED light strip round the back of the TV. I assume the USB sockets wouldn't power a Firestick for example, but they'll be handy I'm sure.Set up was relatively straightforward, tho I recommend you take note of setting up near your router. I have essentially 3 separate home wifi networks, a 5G, a 2.4G and a wireless access point in my garage. I was too near the garden on first attempt, my phone kept switching to the access point wifi in the garage and the strips wouldn't "see" the 2.4G! Moved away and quick success when aligning to 2.4G!Much easier to rename the individual sockets on the Meross app than the Energenie. And Alexa found them all immediately. Just a quick change of group settings and done.These may appear somewhat expensive at first for the two strips, but the Energenie kit was on initial purchase too.The Energenie system often went offline for a day at a time! Plus that needed a socket to plug their hub into. And the Meross kit appears a lot more substantial too.My only slight criticism would be I'd prefer the 6 gang in a long strip instead of a 3x2 block. Luckily none of my plugs/adapters blocked the opposing socket.Reviewed within hours of set up.... I'm sure it'll all work correctly as my other smart plugs do. Cheers!

Just excellent

This device worked perfectly and suited my needs nicely... Until my power went out and it refuses to connect. At least it still turns on but I can't controll the plugs individually on my phone anymore. The entire point of purchasing this device ruined.

Its my second Merross Smart Power Strip. First one exactly the same works fine already many months and after disconnecting from the power it retains settings. Only what people using them need to keep in mind is that the sockets are very tight and to push in the plugs to the very end otherwise some sparkle gap or some bad connection may appear potentially causing equipment to heat up. I can only complain against delivery driver which left the parcel next to the wheelie bin sitting on public road (luckily that wasn't the collection day).That person could not bothered and leave it on the ruff of my car or in front of the building on the pavement both would be very "safe" spots.

Really easy to set up every plug socket of the 8 on the strip is possible to program and label as a specific device but not the USB ports which is slightly disappointing as this would easily make it a 5/5 product and in my opinion is the only negative

حلوه

AWESOME GOOD ITEM

Working flawlessly again

بطله وخدمتني كثير مع اليكسا ♥️