Sculpt High-Temp Resistant 3D Printer Resin, Dark Grey, 1kg

Perfect brand and perfect quality. High detail printing with that Resin.also its High temperature durable good for moulds

This prints very well, surprisingly I have not had a fail print with this and I've used 4 bottles of this products, just be carefully and after you printed and cured it can be very brittle and break

First time using this resin. 100% success from the first print. Used recommended settings on chitubox. 9 hour print. Let's hope this high temp resin stands up to a hot engine bay environment and doesn't distort or crack. I'll add a follow up in a few weeks after testing. So far so good.

Using on a Photon Mono, I found this needed about 50% more exposure time than a standard resin. It is an absolute nightmare to clean. IPA just doesn't seem to touch it on t's own or in the cyclone of a wash & cure machine. I've tried brushing it off and then hairdryer-ing it as recommended by Siraya Tech but nothing actually results in it being less sticky. If you can get it clean then it does seem to be good solid stuff, though since It's nigh on impossible to get clean I've taken to mixing with standard resin just to make use of it.

Sculpt ultra is one of the most amazing resins I've used and really shows the trickle down of material science to consumer level printers. It barely absorbs any water or solvents and is incredibly rigid. It's very ceramic like in many ways, probably because it IS filled with ceramic particles. It's a bit difficult to print, bed needs to be leveled just right and more importantly, because the resin is so opaque, the z-height needs to be very small to not have bed adhesion issues. I had a ton of issues until I realized that was my problem. Whenever I level my bed, I then set the zero a couple steps down and everything is good. The prints come out very smooth and because it's so brittle, the supports come off the cleanest of any resin I've tried. It also means you can't drop your prints as it will shatter like glass. Highly recommend for specialized use cases where you need high chemical, wear and heat resistance.

I was warned this is tricky to print with, but apart from ensuring the temperature is kept to a minimum, it seems no more difficult than anything else I’ve used. I had one initial failure, mostly because of my rush to place supports, but have since printed several items with no issues. Good detail and exceptional dimensional accuracy. I cannot fathom why, but I also use less of this resin for the same models printed with another product. Weird, but good!

Résine épaisse, super pour faire des moules pour injecter de la résine, résistance à la chaleur au top. Une super marque.

Me ha Sorprendido su resistencia. Utilizar en ambiente ventilado. Y gafas protección para luz ultravioleta. Seguir los consejos del fabricante.

I use this resin for printing lens mounts for IP camera modules. The modules can get quite hot, so I went looking for a good HT resin. I had used other resins from Siraya Tech before, and was pleased with the results, so decided to give Sculpt a try. For this application, it has turned out to be a near-perfect solution. It prints clean without much shrinkage. There's a bit of warp on the first few layers, but the layers that count are plane parallel to one another. The only drawback is that it is a thick resin, so you will find that the solids in the resin will settle out over time. Shake/mix well and empty your vat after use and you should be golden. In terms of printability, I haven't had any failures, yet, and I'm fairly relaxed when it comes to controlling things like room temperature. I print with Siraya Tech's recommended settings for my printer, stir my vat between prints and the results are always good.