Key Fob Remote for 2004-2013 Toyota (GQ43VT20T)

excellent product. excellent instructions. getting the vehicle in to programming mode is the hadest thing, but its possible with a few attempts. you can do it. this is such a lifesaver when loading and unloading gear for our band

Easy to set up just followed direction given, I’ve tried multiple key fob for my sienna mini van. Love it . Although it said frequently returned, I haven’t had any issues with it..

qr code took me to a web site that prompted me to enter my car year, make and model. I entered 2007 Toyota sienna and the choices then blanked out. No programing directions. Rufus 's directions do not match what other web sites show. This get's me into programing mode (but I can't get step 6 to work). How to Program a 2007 Toyota Sienna Keyless Entry Remote Fob Smart Key Step by Step How to Programming Instructions: 1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.

Yes!!! Works on my 2004 Sienna. Both units I purchased synced on the first try and they work unbelievably well. Thank you!

Button to open side door doesn’t work but other that that it’s nice.

Bought one from Toyota $120.00 did not work. Bought 2 for like $27 total on Amazon and they work great.

Easy to set up. but buttons don't align well, sometimes they get stuck and I have to open it and realign.

It didn't occur to me when buying that this isn't a Toyota made remote. Nonetheless, it works perfectly for my 2005 Sienna. Programming it was a pretty complicated process but YouTube saved the day on that. Watched instructions about 5 times before doing it and no problems. Some of the comments on that video say the alarm or power door buttons don't work afterwards. The alarm button works for me but unsure about the one power door. Cable broke twice and didn't feel like replacing it again.