KOHLER K-560-VS Bellera Pull Down Kitchen Sink Faucets, Kitchen Faucets with Pull Down Sprayer, 3-Spray, Vibrant Stainless

Delivery was incredibly fast! I ordered it on Monday afternoon and it was at my door the next morning - way to go Amazon!!! I've only had it installed a coupledays so my review will need to be limited to that: Installation - very quick and easy, the most difficult part was removing the old faucet. I had read the reviews about the white insert in the quick-connect for the hose. I did try to pull on it lightly, it doesn't come out easily. Also, the instructions now say it shouldn't be removed. The hose for the cold side was also labeled. Overall installation took less than an hour for the faucet. I really liked . the way it clamps the faucet in place using two screws in a plate pushing against a large washer. My installation was tight underneath and the washer didn't seat flush against the bottom of the sink but I was able to line up the screws and adjust them independently which resulted in a very firm installation. Operation - The hose slides easily and the nozzle operation is flawless. The shut off button is very convenient when moving the faucet. Toggling between spray/normal is done with a plastic button on the back. The button locks in position so there is no need to hold it for spray operation. The spray is not circular - it spreads out in a line which is nice for cleaning dishes but can make it wide at the bottom resulting in spray bouncing back out of the sink. Not an issue - just thought I'd share. I believe I have better pressure now. Looks - I installed in a single hole installation (it does come with a plate for triple hole) through granite. The faucet looks very nice and adds a great touch to our recently updated kitchen. First impression is that this is a quality product that I expect to last for years.

This company is amazing. I don’t write reviews often, and I’m a typical human in that I’m more likely to take the time to write one for a bad experience than I am for a good one (I’m going to be better about that!). But at this point these folks really deserve glowing feedback from us so here it is. We have had this faucet since Jan 2016, and it’s been fantastic—works great, looks great, installed it ourselves without special skills or tools. In that time it’s been used multiple times per day and we use all of its features regularly, thus it has had two parts wear out. The faucet head switch from flood to shower stopped working—simply required painlessly screwing on a new head—and today the hose sprung a leak when in pull-down mode. Both times it’s taken an incredibly seamless 3 minute phone call to Kohler to have new parts sent, completely free of charge. Nearly 6 years in on this product they don’t even charge shipping for replacement parts. The representatives have known my name when they pick up the phone, they know what faucet I have, they know where to ship parts, they probably know my zodiac sign. I didn’t think this ease/quality of customer service existed anymore, total breath of fresh air. Thanks Kohler! PS—it also feels pretty great to have an actually-functioning lifetime warranty that keeps our still-beautiful 6-yr-old faucet current, and out of the landfill. Our experience has been buy quality, consume/waste much less. Appreciate how you do things Kohler!

This Kohler faucet was an easy install. Even though the directions were very basic. It was very simple to install. I do have experience with installung various faucets in my life so far, so it was not to bad. I wll review this as simplistic as I can. The item arrived on time and was well packaged as I would expect from a Kholer product. The faucet is well made solid metal, and very heavy. It made me very happy because the last Glacier faucet was a plastic, piece of, well you know what, hence I purchased this Kohler faucet. As for the install, when you firsr see all the water lines you may think they all will not fit in your single sink faucet hole, but no sweat there and it comes with a cover plate. The two water line connections are as all connections simple. As for the wand main hose line connection it may stump you at first, but don't let it worry you. It comes in two pieces to allow you to slide in the wand weight. As for connecting both pieces, it's really just a push in connection however, don't be a Gorilla and shove it in hard. Just push it firmly enough until you feel it click in and its done. The directions show a poor depiction of the connection process, however if you pay attention to the diagram it shows the lines meeting fully and one diagram not meeting fully. Hope this makes sense. If it begins to leak at that connection, push it in further until you feel it click. Its what happened to me because I was very gentle connecting it at first, because of another review I had read. The faucet operates great. Smooth movements. Wamd pulls up fully, just adjust the weight properly and make sure the drain pipes and disposal pipes do not up struck the wand line movement. The water stop button is also a great feature, makes stopping the water while cleaning pots less messy. High spout also great for pot clearence. Spray and stream features work great with my water pressure. I guess it all depends on your water pressure too. If you have nickle or brushed stainless steel fixtures in your kitchen this is the faucet you want to match them. Hope this helps you all out.

This replaced a 6 year old Moen low arc pull out faucet that I liked but my husband didn't because it was too low (also, the pull out plastic piece broke almost immediately so it was never tight when not pulled out). When an undersink connection sprung a leak on the Moen I looked at replacements that would satisfy both of us. This more than meets our expectations. We both love the height and the full swivel. I love the magnet that keeps the head tight when not pulled out. The sweep spray is very powerful. It was also a very easy installation - it was twice as hard, and took over twice as long, to disconnect and remove the old faucet - the new one was installed just a few minutes. The Amazon price was amazing. Highly recommend this faucet. Update 7-28-17. I have taken off one star. In the time since I purchased this we have had to replace the spray nozzle due to a large drip from the spray section when it was on the single stream setting. And just this week we replaced the pull out hose because of a very large leak from the gasket of the rotating ball socket that connects to the spray nozzle. This last project was difficult because we couldn't separate the quick connect without lifting the entire faucet above the counter top. We couldn't get the required grasp on that connection to separate it when working on your back, inside a cabinet, and behind the sink. Our well water is extremely hard, so I surmise that the minerals in our water have led to these problems, but I expected it to be more durable. It still looks great and I do love how it works.

great faucet.

The worst design ever on the hose connector. Ours arrived without the white collet and o-ring, we only knew we needed it since the instructions indicated that we should not take it off the spray hose connector. Since we had no parts, shown in the pictures all you could do is push it in, and it would not stay in. This box came in sealed, at least it looked so, but now after reading other reviews, it may have been sent back by someone that had problems with the connection. Called 800 number at Kohler.com they only had the collet and not the o-ring. I asked for the o-ring specs so I could pick up another at Granger but they did not have any. They offered to send one without the other, I had to explain that would do no good you need both. At this point it was late and we still had no water in the kitchen after 4 days of no counter, a new counter and faucet that could not be hooked up. No idea how long the parts would take to come in. This was not sitting well at the homestead if you know what I mean. Using the following parts I hooked it up "temporarily" while we waited for the parts to come in. 3/4 inch id clear hose 4 inches long to go over the spray hose connector that had no collet on it. 3/4 inch to 1/2 inch adapter. 1/2 inch id clear hose 4 inches long to go over the brass spray hose fitting. Using worm hose clamps put on 4 of those at the appropriate locations to tighten down the clear hose over the brass pipes. Worked fine, temporary right? Wrong, the parts took 1 and 1/2 months to come in. Since the "temporary" fix was working so well, no rush on "doing it right" wrong again. Noticed air in the faucet when turning it on. Knew that indicated a connection was loose, later that day it gave way resulting in water under the sink but the she turned it off right away. Tonight cleaned out the sink and started to "do it right. The instruction sheet, the newer instruction sheet, has few details, if you zoom in at 300% on the pdf file you can sort of see how it works at step 9. Though reviewers here talk about two o-rings Koller only sent us one, and we could not see any other o-ring in the drawing. us.kohler.com/webassets/kpna/catalog/pdf/en/1212671_2.pdf So first we put the collet on the sprayhead hose with the o-ring on top. Remember this faucet arrived with no collet installed. No way this was going to go in. Under the sink, lining it up, bright flashlight, tight quarters, flavored language, long day at work, you get the picture. Back to the instruction sheet. Ok, Step 7 shows an international no sign over the spray hose o-ring and collet as separate parts. Well since that is the way we now have them since it never came with the parts, what next? Pass over flushing step 8 to step 9 again. Zoom back in, ok, put the o-ring in the spray hose connector, put the collet on the spray hose connector and push in the sprayhead hose. No way this is going to go in. Mechanical Engineering degree kicks in, lube the o-ring that will solve the problem. Take out collet, it does come out, you have to push hard on the tabs when the spray hose is not installed. Reach in with a spring puller to hook the o-ring and pull it out of the spray hose connector. O-ring drops off the spring puller when coming out of the collet bounces on the cabinet floor three times before heading down the hole cut for the water pipes. Check o-ring package for specks, not on the package. Getting late now, put "temporary" plastic hose assembly back on so we have water, works just fine. If someone needs a photo of this let me know, I will add it. Cost about $6 to make, less if you have some parts at your homestead from other projects. Not bad for a $200 faucet. (Yes, dry sense of humor) To those that will have an issue with this review, yes the faucet is attractive, yes it works well when connected. But if you can not connect it up, what good is a dry faucet on top of a new counter? For those that say, why not just return it, remember the parts came in after the Amazon 30 day return window.

Update on this faucet and Kohler customer service. We purchased this item in 2014, yes 12 years ago. The faucet still looks as good as new. The pull down faucet head started leaking around the swivel connector, this only leaked when water was running and into the sink so not a huge deal. I discovered Kohler has a lifetime warranty on their faucets so, I opened a customer service request with them and they sent a replacement hose right away. Then, upon replacing it, the quick connector broke on the faucet body, where the hose connects to. Opened another service request on Sunday, by Monday morning received a response that a replacement clip is being sent. I really appreciate Kohler's responsiveness and customer service not to mention that the faucet is truly great looking and works perfectly.

I've never really done any sink work before, but our previous facuet (some no-name discontinued item from another brand) would slowly shut every time you turned the faucet on, so I thought I'd give replacing it a shot! This Kohler was very easy to install - I have a single hole mount for the sink (not the 3 one). I didn't use the metal stand that came with the unit. The only area I had some slight difficulty was connecting the black faucet hose to the main water socket that the hot and cold water join up in. Testing for leaks shot water everywhere briefly, but I tried jamming it in again and sure enough it slid a tiny bit further in and now is leak free! The look of this faucet is great - it looks very high quality and professional quality. I really like the spray option on the nozzle/end. Instead of having a circular spray - it has a more condensed spray in sort of a wide line. It gives the faucet a little extra power for washing dishing or whatever you are doing. I would absolutely recommend this faucet! It's easy to do yourself. I don't think you'd need any extra parts unless your current faucet has something special/abnormal. I used only a screwdriver, adjustable wrench and scissors, otherwise everything else was included.

This completely and totally enhanced my new kitchen. It's nice and tall (but not too tall) but taller than many others with a SOLID feeling. You can swing it side to side with ease, pull out the water head and get into those really hard to clean areas. The part that you can pull out is pretty long and very solid as well. Overall, we love it. Would highly recommend.

I love this faucet. It was installed a year ago now and I have had no problems. It is sturdy and looks beautiful. I particularly like the magnet feature on the Kohler faucets. It was a good price on Amazon compared to the local stores.

Love the sleek, classy design. This is a well made faucet. Great addition to my kitchen reno.

This and the other plumbing purchases are beautifully crafted. I cannot speak to its function, since they have not been installed yet.

Be using it for over 18 months. No issues, works well and look great with my single bowl extra deep sink.