TOCOL 4 Pack fit for Samsung Galaxy Note 20 5G (Not for Ultra)- 2 Pack Tempered Glass Screen Protector and 2 Pack Tempered Glass Camera Lens Protector Bubble Free Case Friendly 9H Hardness

Don't normally worry reviews about had to about this product. 3rd time trying to find a screen protector for Pixel Pro 7. This one came with no designated thumb scanner which is what I wanted. Easy instructions with step by step. Great quality and value for the money. Fits is wonderful. No scratches. Comes with dust removal kit. Would recommend in the future.

I have gone through 4 TOCOL screen guards and they have served very well. I had some issues with my first order and TOCOL was super prompt and hassle-free about sending a replacement pack. Very easy to apply the screen guard without the presence of bubbles, just make sure you have cleaned the screen and used the sticker to remove any dust particles. The screen protector has protected my phone from falls on the ground, heavy items falling right on the screen, and so on. Depending on the severity of the action, the protector can take a few hits before the glass starts splintering and you have to change it so that is good. The guards do have some thickness and the edges aren't smoothly rounded so you can definitely feel the edge as it sits on top of the screen but indistinguishable if you use any sort of a phone cover. Definitely great value for money. No change in fingerprint sensitivity either

I purchased this product twice because I had to get a replacement phone and needed a new screen protector. March 3, 2020 purchase for my first Galaxy s10e. This product comes with all you need for a clean, bubble free installation. The included guide makes it simple to position the screen protector perfectly every time. Although they lay perfectly into the included guide tray, I used all three protectors without any success at getting them to "stick" down around the edges. I have not had that problem with past phones or tablets; and it appears that many other screen protectors have the same problem because of the slightly rounded screen edge that Samsung used for the s10e. If you look at the photo you can see a "ghost" "white" "Halo" around the entire edge of the screen. This is hard to see when the screen is on, but it is not attractive when the phone screen is off. I have not tested the resistance to scratch or breakage, but I find no difficulty with the touch sensitivity. One Month Update: I am still using this screen protector, with the Spigen Tough Armor case. Although the screen protector still has "ghosting" it has not shown any evidence of lifting, and has done well protecting the screen from scratches. August 6, 2020 purchase for my 2nd Galaxy s10e This product still comes with all that is needed for a clean, bubble free installation. This time the first screen protector that I tried perfectly sealed all the way around the phone leaving no ghosting. If you do not get a perfect install, contact the company they were happy to work with me. The second batch of protectors worked perfectly. I give 4 stars because the first time none worked well.

Phone looks great with this screen protector on it. Great fit and ease of application.

First and foremost, I love how screen protector manufacturers are now (often) including a frame guide to aid in installation. It's made installation significantly simpler. As for the protector itself, it fits the Pixel 6 just right (~1 mm "overhanging" the top and ~3 mm "overhanging" the bottom edges of the screen and ~1/2 mm past the left and right of the screen). There's also a good ~2 mm between the protector and my Spigen case all the way around so there's no concern with the case pressing the protector off or causing stress fractures. Using the included guide tool (placing the top/selfie cam side of the protector down first), the screen protector selfie camera hole is almost perfectly centered and should not interfere with the camera usage. (To nitpick, the protector is a hair left of center and 2 hairs above center.) That said, a couple down sides are that there's no guide for the rear glass installation and no tape handles to aid in placing the glass down carefully. The rear glass protector is smaller than the visor glass so holding the edges of the protector to place down is a little awkward. In retrospect I should've used my dust sticker as handle to make rear glass installation easier. Also, there doesn't appear to be any fit issues with my Spigen case. Lastly, I'm not sure how the fingerprint sensor behaved without the protector on (I installed this stuff before setting up the phone) but overall performance of the fingerprint sensor is subpar. I don't feel like docking a point for this because I don't think it's a fault of the glass protector as much as it is a misstep by Google in their hardware design choices coupled with their software package tuning (supposedly). Time will tell if this improves with future software updates. Overall I'm happy with this purchase and would consider this brand again for future phones.

I have tried several types of screen protectors for my phone, but this one is by far the most effective and easiest to install. Most of the people that get "bubbles" are not removing all the dust from the front of the phone before applying the protector. Mine went on effortlessly in under 3 minutes, zero bubbles. Highly recommend.

I've used the Armorsuit film protectors on previous phones, thought I'd try a tempered glass protector this time (Samsung S10e). I was expecting the installation to be a little tricky, and it is! Nothing specific to Tocol, screen protectors are just hard to install. First try I made the mistake of doing it in the kitchen - too dusty! Even though I was careful with setup & cleaning, several specks of dust were trapped under the protector. Once that happens, the protector can't be reused as it has a sticky back and there's no way to get the dust off it. 2nd try was in the bathroom after taking a shower and spritzing the air over the counter, then waiting for things to settle out. Much better! However still not 100%, there's one dust mote under the screen which I'll just have to live with. Also had some trouble getting all the air bubbles out. I had to pry up the edge carefully and squeegee them out. Film protectors are slightly permeable so the last tiny bubbles disappear over a day or two; this won't happen with glass. The other issue is that one edge just won't quite stick down. Another minor issue with flat glass protectors (again not Tocol's fault) is that the S10e's screen edges are slightly curved, so the protector is slightly undersized to cover just the flat area. This leaves a visible gap between the protector and the phone's case. But the main issue is the pale line down one side where the protector's edge hasn't quite adhered. Tocol should add to their instructions that you need to install the protector in a completely dust free zone, and that you really only get one chance to lay it down. If you have to pry it up to release bubbles there's the risk of the edge not adhering properly. I'm really glad Tocol gives you 3 protectors! Now that I've used 2 of them I don't dare try again right away. I do live in a very dry, dusty environment (Arizona), and it's been a very dry summer. I may try again with the last protector in the winter when it won't be as dusty. At least the price is good so it's not a huge loss! UPDATE 9/4/20 I contacted Tocol about the edge not sticking down, and they promptly offered me a refund, which I accepted. So 5 stars for customer service! I think I know why one edge isn't sticking - the protector is very slightly misaligned. As another reviewer commented, the installation guide frame is slightly larger than the protector. You need to center the protector within the frame; I can see from the selfie camera hole that mine is just off center. I think the S10e screen curvature is enough to prevent the edge of the protector sticking because of this. After living with the protector on for a week I mostly don't notice either the trapped dust speck or the unstuck edge, but I do notice the "frame" effect of the gap between the protector and the case, about 1mm all the way around. The thickness of the protector and low edges of the case also make the glass surface just about flush with the edge of the case, which I also don't like. None of this is Tocol's fault, just my personal preference, but I think I'll eventually switch to a thinner film style protector. UPDATE 9/18/20 I got my wireless charger! There was an insert in the box that said, if I write a review here and fill in the form with a screenshot on Tocol's website, they'd send me a wireless charger. There was also the small print saying it's only for early customers, and given that this is a previous generation phone I wasn't really expecting to get anything. But I got an email saying it was on the way, and it arrived today! And it's great, circular and very thin like a thin coaster. Works perfectly. Thanks Tocol! I have to say that after a few weeks, this glass screen protector is not for me, sadly. Nothing to do with Tocol, I just don't really like it - too slippery and I dislike the small gap between the protector and the case, crumbs get trapped in it and I keep feeling the edge when dragging there. Not Tocol's fault, all of these case friendly glass protectors are like this. I just personally prefer the thinner self-healing film style, which are also more scratch resistant than glass. Still, good to have tried it and top marks to Tocol for their customer support.

I wish I could give a full five stars! This screen protector was super easy to install ( the easiest to install of any screen protector I have ever used): the stickers and steps are all numbered or labeled and the guide stickers basically make it foolproof. This is the only screen protector I have not had to readjust after placing on my screen (without using tape of course). Highly scratch resistant, and it's awesome they provide 3 screen protectors per package because my phone has some nasty falls and in the span of a year I've gone through all three. I decided to use tempered glass to see if it has a better touch response than my typical, favorite screen protectors (gel protectors) AND IT DOES! Yet, because it is a glass, it is far less durable than the gel protectors and as I said above, I have gone through three of them in the span of a year because one fall that causes a small little crack, continues to spider web across the screen protector. Once those small cracks propagate into large cracks that are going across the entire protector, the touch response goes way down and you will start to get erroneous, false touches on your screen. Regardless, I knew all this going into my purchase and this is some of the best, most responsive tempered glass I've ever used !!!🎊🎉 Since the Galaxy S10 includes the proximity sensors in the camera well, the tempered glass does not mess with the camera or the face proximity sensor. (Other tempered glass products I've used on other phones have lain across the proximity sensors and because a small fraction of the infrared light bounces off the glass and back into the sensor, my phone thought my face was against it (or was in my pocket) the entire time, and so the screen would not light up. Overall great screen protector. However, and it's a big "however", This screen protector does not reach a large chunk of the touchable area on the device's screen (see attached picture) and therefore you cannot control about 2 to 3 mm of your phone, all the way around the edge of the protector. 🤦‍♂️ Hence, only 4 stars.

Die Gläser sind hochwertig! Das Glas für den Touchscreen lässt sich bei Beachtung der Anweisung leicht aufbringen; 1x am oberen Rand gerade angelegt und das Loch für die Kamera richtig ausgerichtet, kann man das Glas langsam loslassen. Das Glas wird durch die Adhäsion langsam "angesaugt" und legt sich auf den Bildschirm. Es blieb nur eine kleine Luftblase (ca. 2 mm) nahe des Randes unter dem Glas, die mit dem Rakel leicht nach außen geschoben werden konnte. Das Schutzglas deckt den Bildschirm perfekt bis zur Wölbung ab; der verbleibende nicht abgedeckte Rand beträgt oben und unten 1,5 mm, rechts und links 1 mm. Schwieriger ist es, den Kameraschutz anzubringen. Aufgrund der geringen Größe des Kameraglases und der Steifigkeit des Schutzglases musste ich 3x ansetzen, bis der Schutz angebracht war. Das Glas lässt sich nach Fehlposition problemlos wieder abnehmen und neu ansetzen. Man muss allerdings sehr gut aufpassen, beim Entfernen des Glases nicht mit den Fingern darunter zu fassen, denn dann hat man auf der Rückseite die Fingerabdrücke, die sich nicht mehr entfernen lassen. Insgesamt bewerte ich diese Schutzgläser als sehr gut. Weder die Haptik, die Bedienung des Touchscreens noch die Kamerafunktion werden beeinträchtigt.

Ho provato diverse marche protezioni per lo schermo e questa è per il momento la migliore. In dotazione viene fornito: due pellicole frontali + 2 pellicole per fotocamere posteriori + kit per pulizia e installazione; in questo kit molto utile lo strumento per togliere le bolle d'aria mai trovato in altri kit. Questa pellicola è perfetta per il Samsung S20 FE 4G a livello di dimensioni ed inoltre ha il foro superiore per la fotocamera frontale che oltre a migliorare le foto selfie aiuta nel posizionamento della pellicola. Il feedback del touch sembra migliore rispetto ad altre marche. Ultra-Consigliata.

Très content de cette protection écran, facile à mettre en place avec le gabarit fournit. Regardez la vidéo avant, ça aide... Il y avait une ou deux minuscules bulles que j'ai réussit à faire partir en insistant un peu.

Película de alta qualidade, não atrapalha o sensor biometrico nem a resolução da tela. Nota máxima para esta película.

Makes sure you get it in the right place, still doesn't stop me getting bubbles, but that my own fault. Great screen protector