ivoler [3 Pack Compatible with Nintendo Switch Screen Protector, [Tempered Glass] Film for Nintendo Switch - [9H Hardness] [Anti-Scratch] [Crystal Clear]

Well packaged, and comes in a useful pack of 3, which will come in handy as glass screens do crack from time to time. Really easy to apply, and they fit the switch 2 perfectly. Really happy with this purchase

Very good, straight forward to apply and managed to get perfect fit and clean finish on both switch 2s I put them on. Wouldnt even know they were there.

Pack came in secure hardback case so they arrived perfectly. Not had much testing as I've been super careful with the switch, but no chips or marks so far! Easy to apply, and even easy to lift back up a little at the corner to get bubbles out. Shape and size perfect to the devices screen

Got these to take two switches on holiday that already had cracked protectors. These are ok, I have fitted loads of protectors before but these still ended up with bubbles. Cheap and cheerful.

The easiest screen protector install! It comes with all these extra sticky pads and bits, I just wiped with a lint free cloth I already had. Then one of the wet wipes, dry wipes and then slowly dropped it down using the bottom cut outs as a guide. I recommend a small guitar pick like tool or flat tool if you put it down squint to help lift it up again!

These fit perfectly and appear to protect the screen well. Been on for ages and no damage yet. Also don't interfere with the screen visibility or touch screen ability. Would buy again and recommend.

If you're looking for reliable screen protection for your new Switch 2, the ivoler 3 Pack delivers excellent value and performance. It’s a simple, effective solution that keeps your console safe without compromising on clarity or touch sensitivity.

Perfect fit for switch 2. Easy to follow instructions meant that I got it right the first time so I still have 2 spare screen protectors. Really cheap as well and does the same job. I had no bubbles when applying the protector. It comes with 3 screen protectors, 3 wet and dry wipes, 3 sets of alignment stickers and dust absorber stickers. Highly recommend

Die Schutzfolie aus Glas ist passgenau für die Switch 2. Wir haben diese direkt auf eine neue Konsole aufgebracht. Das Display war damit schon frei Staub und Fingerabdrücken. Beim Spielen merkt man die Folie gar nicht auf dem Display. Tolles Produkt und ein guter Preis.

This pack comes with everything you need to get a perfect, bubble free installation! While the wipes are very small, only about a 2in by 2in square, they are definitely sufficient for the job! The wet wipe is very wet and easily covers the whole screen with the cleaning agent. The dry wipe, while it gets the job done, could benefit from being a little larger just to cut down the amount of time spent drying and removing any remaining debris. The included dust stickers are REALLY sticky which I found to be too much. It is very easy to move the whole device around and even pick it up if too much of the sticker contacts the screen. That can kick up more dust and means you have more to remove from the screen. That said, they do remove dust and debris as they should! What works for me to get a perfect, bubble free installation is as follows: Start with the wet wipe, focus on the edges and corners to get them really clean, but also wet the whole screen. Grab the dry wipe and get the screen dry. Continue to use the dry wipe to get every spec of dust and debris off of the screen. Move the device around under a bright light to see if anything is still attached to the screen. Feel free to grab the wet wipe again to spot treat areas that the dry wipe can't clean easily. The screen doesn't need to be perfectly streak free, just dust and debris free. Don't spend too much time trying to clean and clean as you'll just end up making more work for yourself. Once the screen is dust free, grab the dust removal sticker and gently stick a very small part of it to the screen for easy access. With a perfectly clean screen, hold only the sides of the protector and have the removable film on the bottom side. SLOWLY peel the film off of the back of the screen protector (as in, take 30+ seconds to remove that film). If you go too fast, dust might get sucked into the space between the adhesive and the protective film and then get stuck to the back of the screen protector. If that happens, you'll have a bubble you can't get rid of. Before placing the protector on the device, grab the dust removal sticker and remove any dust that may have fallen on the screen. Be sure to keep the screen protector facing adhesive-side down and don't touch anywhere besides the edges. Once you are confident the screen is 100% dust and debris free, align the left or right edge of the protector with the screen while keeping the other edge a few inches away from the screen. I aim for a tiny gap away from the plastic around the screen, something like a fingernail worth of thickness. Once the gap is even from the top to the bottom of the side edge, simply hold that position with your free hand and completely let go of the protector so it falls down into place. The adhesive should start grabbing and just let it go. If it does not start after a few seconds, gently press on one edge of the protector. Once fully seated, work outwards from the center to remove any air bubbles that may have gotten trapped. Overall, these protectors are a great value and I can absolutely recommend them!

Just follow the instructions via the supplied qr-code (use the qr inside the flap, not the one on the back). Direct to YouTube and super simple. Everything needed is included in the pack. First try, no dust or air bubbles, great success! P.s: The size is 99.9% correct, could use an extra 1 or 2 millimeter in height but definitely not a dealbreaker.

Bardzo dobra szybka, pięknie i mocno przylega, wielkość prawidłowa zasłania cały front konsoli. Dotyk działa. Do tego stopnia dobrze się klei, że mogłem ją w ostatniej chwili aplikowania odkleić poprawić i pieknie sie przykleiła ponownie. Co warto nadmienić to że kąty szybki nie są tak idealnie spasowane z tym jak ma Switch 2 - są troszkę bardziej obłe - jeden powie ze to wada(nie idealny kształt) drugi zaleta (może być przydatne przy odklejaniu)

It's was pretty easy to install it, I did it without the wet wipes and dry wipes just a clothe that is use for screens and glasses, it fits right above the switch 2 screen, it's works well, quite shiny when looking at an side perspective, this is my first time applying it to any handheld device, I thought I'll grab this since the switch 2 is pretty darn expensive, so I gotta take some safely measures to protect the screen since it's so nice to look at, comparation to the switch 1, it comes with three tempered glass screens, keep the rest in a secure place for backup use, now we were ready to take this baby handheld portable without worries about the screen being scratch. 5/5 also the screen is still touchable with your fining taping on the menus with this on it.