Ductless HVAC Mini Split Line Set Cover - for AC Line Cover (White 3x7.5ft)

This was easy to install and surprisingly it made the mini-split install easier. You install half of the base half of the cover which gives you a good perspective on where you need to guide your lines and cables. I use zip ties to help me during this process. Once everything is in position and taped up it was a simple matter of putting on the cover (outer halves). The size accommodated the refrigerant lines (insulated), drain line and control cable, not to loose and not too tight. I bought two kits as I needed two wall 90's. I do wish they would have options just to purchase the fittings. As you can see in the picture I also used some 2" Black Convoluted Split Tubing to protect the refrigerant lines from UV. This was much easier than using the wrapping pvc tape typically supplied with mini-splits or using this cover kit to protect it. Got the tubing here on Amazon. I am happy with how this came out, both in appearance and function. So it gets my recommendation.

Simple to install and makes lines look so much cleaner in side of the house as well as protecting them from the elements

Very good but was not quite wide enough to handle a Mr Cool DIY mini split line set at the point where connectors meet - I recommend trying the 4" model instead..

The front of our house looks so much better after we installed the Hide-A-Line kit to cover the ugly, uncovered air conditioner (AC) line that the installer put across our house siding. (See before and after pics). The Line Cover Kit installation on the existing line went pretty smooth. I had to use a hacksaw to cut a slice in the back panel of the end piece to fit it around the existing pipe where it bends into the hole in the siding. Also, since I had to remove the original brackets holding the horizontal AC line in place, the AC line sagged over it's 14' length inside the line cover. I cut pieces from a roll of Galvanized Steel Hanger Strap and bent them around the AC line at 3 ft intervals, screwing them into the siding through the back cover panels, and this provided support to keep the AC line from sagging. The only real glitch I had was when screwing in the front of one of the coupler panels -- I over tightened it and the screw head snapped off, leaving the length of the screw in the plastic hole in the back of the coupler, so then the front of coupler wouldn't fit snuggly. I ended up ordering one new coupler section to replace that one. So, be careful not to over tighten the supplied screws when using a powered screw driver. I used the 4" line cover kit, and that left a gap around the end, where the AC line exits the cover kit, so I filled the gaps with spray insulating foam. After installation, the line cover was primed and painted by our house painters, and looks great.

This worked out perfectly for me. I bought 2 of these kits as I also bought 2 mini splits (Confortotal) I realized after installing the 1st 1, that this kit needs to go on BEFORE you connect the lineset 😬 so I just snipped 1 side & you obviously can't see it, but that's what worked; but yeah,,, FYI, do this before the lineset is connected if you can, & if not, just snip 1 side & slide it over the lineset & you'll be good to go... Another nugget is that I didn't screw the kit into the brick; the way I have my lineset, it basically holds it in place perfectly...

Covers the tubing and wires making a very clean installation. A must for your mini split. easy to install in less than 1/2 hour.

Great product

I bought and installed this a year and a half ago. I bought this for two reasons. I liked that this was a 4 inch rather than a 3 inch thus giving me enough room to run six refrigerant lines in two runs. Second, this could be painted with water base paint without any issues. And painting was optional. So I left it white without painting and to my surprise the brackets for each joint as well as the head turned a creamy yellowish color. UV light? I don't know. It looks ridiculous as if I used two different brands. Now, i need to spend the time, cost, and energy to paint. Not happy with this but I have no other issue.

The channel tubes are well made. The fittings were very poorly moulded and made of cheap brittle plastic. It did the trick but I would hesitate to pay more than $35 for this kit.

parfait et livraison rapide

Pour cacher les conduits de ma thermopompe

I am very satisfied with product and service

Very easy to install. Went up in less than an hour. A must for outdoor lines