57-Piece Hand Drill Set With Pin Vise, 46 Micro Twist and 10 PCB Mini Bits for Resin, Polymer Clay, Craft, DIY Jewelry (0.1-1mm, Random Color)

Really nice little kit, exactly what I needed for clearing the thru holes in PCBs. Cleans out those stubborn blocked holes when the sucker and solder pump have given up.

Perfect, just buying again, as one here, one already on boat👌😁

Ok, so I realise that a 0.4mm drill bit isn’t going to be super sturdy, but having snapped one despite all precautions, I’d say these are not as strong as they could be. In use, I’d suggest a cutting oil, and to proceed extremely slowly forward and backward with nothing more than a light forward pressure - think taps and dies rather than high speed drills. Good value, just don’t expect miracles from these ever so tiny drills!

I have bought these before they are very good when model making

The item was very good and it does the job perfect thank you

Cut well into white metal. Downside is drills are lumped together in plastic bags with no size reference.

I guess the quality of the materials are bad for hard things But it's still nice

I can not fault the delivery time for this product especially the time of year. Packaging was good but that is as far as it goes. I will start with the positives first. The pin vice has a nice chunky appearance and sits in the had well enabling a controlled use of all the bits. That's as far as it goes. The negative: The parts are poorly made with un-milled burr and a ridge where other parts have been crudely stamped out. This is noticeable on the vice teeth/jaws. The rotating handle squeaks non-stop even when lightly oiled. However, it still functions. The bits were something else! I tested the bits on a section of soft plastic. New bits should have cut through this with little or no resistance. It took ages to drill through 1.5 mil. 3 bits broke in the process. On checking the bit heads with a magnifying glass I found many were blunt or were not angled to cut. I do not think they were second hand, just badly made. One piece was just a straight piece of wire with no drilling ability. Basically it was a 30 mil piece of wire. I appreciate these were on the cheap side of the scale but still expect them to be fit for purpose. I gave this product a one star as I could not drop below that scale, more likely a minus 2 in reality. Do not waste your money.

Ich bin begeistert von dem Lieferumfang der enthaltenen ist. Der Bohrer macht genau was er soll und ist für kleinstarbeiten sehr zu empfehlen.

Works great, be gently so they don't break off

Pin vice hand drill and assorted sizes of mini drill bits - perfect for those small projects

This pin vise is a great tool for anyone in the scale modeling or model railroading hobby. It's perfect for all the fine detail work that the hobby demands. I use it constantly for drilling out gun barrels, creating holes for grab irons and railings on locomotives, and for running small wires for lighting. The assortment of tiny drill bits that comes with it is fantastic and covers pretty much every small size you could possibly need. The hand drill itself is comfortable to use. The top spins freely in your palm, which makes the drilling motion smooth and easy. Important word of caution: the small drill bits are extremely fragile. This is not a defect; it's just the nature of bits this tiny. You cannot apply a lot of pressure. You have to be patient, use a light touch, and let the sharpness of the bit do the work. If you try to force it, the bit will snap. There a more expensive pin vises that has a higher quality drills, but I’ve broken those multiple times as well. For the price of this set though I can just buy a new one. This kit is an incredible value. For the price, you get a great pin vise and a good collection of bits. Highly recommended.

Acordé al precio