HT206D Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)

Functional, easy to use, not expensiveI lost my previous same multimeterI've bought sameI like it

Great meter and an excellent value.

First impressions after 2 weeks of use. This meter does almost everything I need. Voltage and resistance readings are spot on. Capacitance readings seem accurate down to 10 pf. AC RMS voltage readings seem accurate. The ability to hold peak readings is a nice feature. The main limitation is current readings. AC current readings seem reasonably accurate (of course you need to place only 1 wire in the clamp. However DC current readings (in the 100 mA range) were inconsistent even after nullify out the stray magnetic fields with the "zero" button. Unfortunately there is no direct way to measure mA currents using the probes. (In one case I just put a 1 ohm resistor in series with the circuit and measured the voltage. As long as the current is less than 1 A, a 1 W resistor should suffice.) The auto power off function is nice, but the only way I found to turn the meter back on is to turn the function knob to "off" and restart. I found the thermocouple useful for checking the temperature of a power resistor. (I had no idea that they could hit 130 C while operating within their rated power!) All in all, I would recommend this unit for an advanced hobbyist.

This Kaiweets HT206D clamp multimeter is great - I love it. For $48 it is a best buy.{{It competes well with my several hundred dollars Fluke multimeter. My biggest issue with Fluke is their probes are outrageously priced, but their meters are excellent.}}I have tested all functions, and it works very well. The clamping ammeter is a real plus. This is now my go-to meter for everyday projects. I like the fact that it uses two AAA batteries. I hate rechargeable anything and avoid them like the plague they are –always discharged when you need them most and you need to wait to recharge them. Not this meter – just slip in two new AAA batteries and you are good to go.Half the leads (mainly the fine pointed ones) that come with the meter, however, are crap and so is the optional Kaiweets 23-piece multimeter test lead kit. These have connectivity issues with either high ohms or ohms that continuously jump all over the place. They are held in place via a crimp and the conductivity is awful.The Kaiweets vendor replaced the 23-piece kit for me, but the replacement had the same conductivity issues.Save yourself time and aggravation, get a good lead set for this. I wasted a few weeks thinking the meter was bad when it was bad probes.These are the probes I ultimately settled on as excellent for this Kaiweets clamping multimeter: the Snakol 22-Piece Multimeter Test Lead Kit and the Bionso 25-Piece Multimeter Leads Kit - both at about the same price as the malfunctioning Kaiweets test probe kit. The main difference is the Snakol has longer probe handles which I like. I am using both sets, however.All the probes in these two sets have great conductivity and no issues and they fit the Kaiweets HT206D clamp multimeter. They give stable readings of 0-to-0.1-ohms.The main issue with these, however, is the probes need to be screwed into place with a wrench or needle nose pliers making changing probes more difficult. On the other hand, this is likely why they give such good conductivity. However, you can buy multiple sets so you can permanently set up the probes you use most frequently. Some of the other probes in the set are the plug-in type so they be changed easily and these have excellent conductivity as well. I find these two kits give me all the probes I need and more.

Excellent functionality. Been using for years and it's the best meter I've bought.

Nice features for the cost, feels well made, solid feeling switch

I must state that I am NOT a professional electrician nor am I an electrician by trade. I am a technology enthusiast. I design and deploy networks, hardware installations, repairs and personnel software provisioning. I needed to add a digital clamp meter to my growing tools set. A clamp meter because I want to be able to measure amperage as well. I needed something capable, durable and with a decent amount of functionality. This came up in my search and then I moved on to investigating it through YouTube reviews.My dad was a service technician so I had an idea of some of the functions that I wanted.This HT206D is impressive.As an artist and someone nearly obsessed with design, I appreciate its form and the colours are lovely. Predominantly red and black with white and orange for labelling and one grey rubber button. The clamp is firm and while I thought I would have had a reservation about the body being made of plastic instead of rubber, it turns out it is a non issue. I have big hands so nearly everything is relatively small in them. This is small to me and also very comfortable. The way a little of the circumference of the dial overlaps the edge of the tester, it is easier to use for a one handed operation which makes it convenient for you to use your other hand to manage the probes, which, are very decent quality. The cables are soft and pliable so there is virtually no resistance in getting them to the contacts that you're trying to reach.The overall boil of this is sturdy and has no feeling of cheapness or anyone cutting corners to compromise on anything.The features are as good as the best I can guess. Firstly, this is a Direct Current AND Alternating Current tester. You don't have to chose between having one or the other. The display is big and clearly visible. Even if ambient lighting is not sufficient for you, backlight facilitates clear, legible readings all the time. If you want a comprehensive list of the features, they are listed here on the amazon page, as well as numerous other sites with reviews. I must add though, that the thermometer is a really nice additional peripheral. I can't say for now what cases I can think of where I will have need for it but it is an additional value.Like I stated earlier, I am not an electrician by trade. However, the data I have seen others collect on other forums, compared to more finely tuned instruments, are only dissimilar by a negligible margin and personally, they align with what is expected.In addition to this being an AC/DC tester, I bought it because of the 600 Volt capacity. I can say with certainty that I will NOT find myself in any environment needing a higher capacity than that. My home uses 110/115 volts with 220 volts for a small number of appliances. My car has a 12 volt battery and my alternator gives me close to 15 volts. Not to mention that the everyday consumer electronics dont consume much electricity or produce any power to even reach have of what this can test. It was a comfortable buy and if you're an every day person, a hobbyist or even a professional, the capabilities of this tester will not come up short of what you require.

Works well, seems to be accurate and reasonably fast in most cases. The build quality is good and it can be operated easily into the various modes with one hand.It has some quirks - mostly not very annoying.Like most clamp meters. it can't be easily propped up to free your hands. If there's no place to clamp it up where I can see the screen, I generally need to lay it down flat. I will probably make a holder for the workbench, though that may not help in the field.I have noticed that the audible continuity mode will beep, briefly stop, and then beep continuously when there's no apparent contact bounce (i.e. an LED connected to the same switch does not blink).A few very common (for me) actions require a long-press, such as zeroing the DC ammeter or switching to proximity detection mode. The UX could be better. I sometime have to cycle through all the ammeter modes because of releasing the "zero" button too soon. Several of the dial settings modes then require pressing a button for the "sub-mode" and my most used modes are not the "default" requiring me to tap a few times.It also seems to lack the ability to do small-current inline measurement (e.g. single-digit milliamps. Such a feature has led to the frying of many meters, which is probably why they didn't include it!). The Hall effect sensor is sensitive, nice and includes the direction of DC current. I do sometimes wish for smaller clamp-arm cross section size, as I work with many tight wiring situations in RVs and sometimes struggle to get a wire far enough out of the bundle of wires.Despite these quirks, it is a good meter and I feel it will give years of good service. The included batteries have not yet died through many hours of use.

Als Elektriker mit langjähriger Erfahrung war ich auf der Suche nach einem zuverlässigen und präzisen Strommessgerät, das meinen Anforderungen an Genauigkeit und Vielseitigkeit gerecht wird. Die KAIWEETS HT206D Stromzange hat sich dabei als ausgezeichnete Wahl erwiesen, die meine Erwartungen in jeder Hinsicht erfüllt.Die Handhabung dieses Strommessgeräts gestaltet sich äußerst einfach und unkompliziert. Dank ihrer ergonomischen Bauweise liegt die Zange gut in der Hand und ermöglicht eine bequeme Bedienung, auch über längere Zeit hinweg. Das gut lesbare LCD-Display liefert klare und präzise Messergebnisse, die eine einfache und zuverlässige Überwachung des Stromflusses ermöglichen.Die Vielseitigkeit dieses Strommessgeräts ist beeindruckend. Mit einer Messbereich von 0-600A ist es für eine Vielzahl von Anwendungen geeignet, sei es die Überwachung von Hausinstallationen, die Diagnose von Fahrzeugsystemen oder die Wartung von Industrieanlagen. Die Möglichkeit, sowohl Gleichstrom (DC) als auch Wechselstrom (AC) zu messen, macht es zu einem vielseitigen Werkzeug für verschiedene Einsatzbereiche.Die Genauigkeit dieses Strommessgeräts hat mich ebenfalls überzeugt. Dank der hochwertigen Sensoren und der präzisen Messalgorithmen liefert es zuverlässige Messergebnisse mit einer Genauigkeit von bis zu ±2%. Dies ermöglicht eine präzise Überwachung und Diagnose von Stromkreisen, ohne dabei Kompromisse bei der Zuverlässigkeit einzugehen.Die robuste Bauweise dieses Strommessgeräts gewährleistet eine langfristige und zuverlässige Funktion, auch unter anspruchsvollen Bedingungen. Die hochwertigen Materialien und die sorgfältige Verarbeitung machen es zu einem langlebigen Werkzeug, das auch bei intensivem Gebrauch seine Leistungsfähigkeit behält.Insgesamt kann ich die KAIWEETS HT206D Stromzange uneingeschränkt empfehlen. Sie bietet eine präzise Messung, eine vielseitige Anwendung und eine zuverlässige Leistung zu einem erschwinglichen Preis. Wer auf der Suche nach einem hochwertigen Strommessgerät für den professionellen Einsatz ist, wird mit diesem Produkt garantiert zufrieden sein.

Muy completo y fácil de usar

Wanted a clamp meter for quick testing (and to use the clamp to hold the meter in my line of sight when using the leads in an awkward position), and I am surprised - and pleased - to say this meter has proven to be accurate and reliable. There are a bunch of them all the same, but with different brand names on them, so go ahead and compare and get the one offered at the best price. It's amazing how the cost of electronics has gotten so cheap that they can make meters like this that will satisfy 90% of people who need to use them. Obviously, pros using this kind of tool every day will want something higher quality, but for occasional, light use, this is a great purchase.

性能は他のレビューを参考にしていただいて、私が関心したのは本体の加工制度と素材のよい樹脂を使っていること。価格は安いのに筐体の安っぽさは全くなくて手に持った感じ非常に頑強な印象があります。プロの現場でも使えそうです。

Buen aparato muy fiable