Rupse Motorcycle Alarm System, 2pcs Remote, Anti-Theft for Ebike/Scooter

This is a great product easy install, the speaker itself is really loud and it comes with two fobs! By the way make sure you strip the wires for easy twisting.

This works great for my application, it does not have ignition disable but will draw attention. I used it on a scooter which is within earshot so it will sound if someone touches it. I set the sensitivity at mid-range as this alarm is very sensitive and did not require super high sensitivity. I did mount it with two screws in the holes provided instead of the double sided tape supplied. I also installed an inline fuse to protect other nearby wiring. Works great and worth the price.

I wanted to install a security system on my bike because it seemed like a cheap enough entry. I originally started with a stand alone battery operated unit (the most popular one on Amazon) and was dissatisfied due to the level of sensitivity the unit had when the motorcycle was disturbed. I ride a 2017 Yamaha FZ-09 for the record. This alarm ended up being only marginally better in that it draws power from the battery so there's no battery to remember to replace. The install itself was straight forward and involved connecting of positive and negative wires to the battery terminals. It would have been nice if the wires were not just bare wires and had some sort of connector. I ended up soldering some spade connectors in 22 gauge which made it nice and clean. Connection to the battery at that point was simple and the wires were easy to route. What I was not happy about with this kit again was the level of sensitivity. Someone would have to straight up SIT on my bike for the alarm to go off. I guess it would go off if it got tipped over too. At the end of the day I'm going to give it to you straight: This a cheap way to add "resale value" to the bike, and to look cool when it chirps when walking to or away from the bike. The alarm sound itself is annoying, the directions impossible to understand, the remote feels cheap, and the sensitivity settings are too difficult to follow thereby rendering the system with essentially one sensitivity. This product is worth the $25 to gain the cool factor and up the resale value (on paper) - but DO NOT expect anything beyond that. This is probably the best motorcycle alarm system you can get, and it's still borderline junk.

Once i installed end to install under battery terminals it to about 1 min to install. Sensitive touch on motorcycle sets off alarm which is pretty loud for a $20 alarm. Extremely happy with purchase. 100% reccommend. Remote easy to use. Connection was a breeze

I finally got it after I extremely long wait and when I tried to use it I found that you had to hit it with a sledgehammer to make it go off. I wish there was a way to make the sensitivity a little softer. It might be a good product then.

I have received this order and have tested it according to the description and it works well.

Packaged well with adequate instructions. Easy to install. Decent range to fobs (depending on where you mount with regard to metal obstructions). The reaction to motion er vibration is finicky. We go the best results when we mounted securely to solid metal so that the vibrations would be better transferred to the unit. We mounted in a side by side (CanAm Maverick), which experiences a lot of bumps and jolts, notwithstanding the unit continues to function as when we first installed. Would purchase again.

Mt old alarm started draining my battery so decided to go with something simpler. This just connects to the battery and you are all set. Pretty loud and good sensitivity. Warning: I bought the used one to save $5 and that one came defective. Bought the brand new one and worked perfectly

I instal the device on my bike. Easy instalation, working fine.

It was so easy to install thank you very much