RIVERWELD Argon Gas Flow Meter Scale Tester Measure Flowmeter for TIG Welder Welding
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4

RIVERWELD Argon Gas Flow Meter Scale Tester Measure Flowmeter for TIG Welder Welding

3.9/5
Product ID: 134806685
Secure Transaction
📏0-25 L/min Scale
⚙️4-30mm Nozzle Caliber
🌬️All Gas Compatibility

Description

Weld with Confidence! 🔥

  • DURABLE CONSTRUCTION - Made from high-quality silicone rubber and plastic.
  • USER FRIENDLY DESIGN - Simply place over the nozzle for instant readings.
  • PRECISION MEASUREMENT - Accurately measures gas flow for optimal welding performance.
  • LIGHTWEIGHT PORTABLE - Weighs only 1.06 ounces for easy transport.
  • VERSATILE COMPATIBILITY - Works seamlessly with both MIG and TIG torches.

The RIVERWELD Argon Gas Flow Meter Scale Tester is an essential tool for welders, designed to measure gas flow accurately from 0 to 25 litres per minute. With a nozzle caliber range of 4 to 30mm, this lightweight and portable device ensures optimal performance for both MIG and TIG welding applications. Made from durable materials, it guarantees longevity and reliability in various welding environments.

Specifications

ManufacturerRIVERWELDstore
Part Number8710601945564
Item Weight1.06 ounces
Product Dimensions4.33 x 3.54 x 2.36 inches
Country of OriginChina
Item model number8710601945564
Is Discontinued By ManufacturerNo
MaterialSilicone Rubber; Plastic
Item Package Quantity1
Included ComponentsArgon Gas Flow Meter Scale Tester Measure Flowmeter
Batteries Included?No
Batteries Required?No

Reviews

3.9

All from verified purchases

E**D

Can be an ABSOLUTE gamechanger!!!

Learning to TIG weld, and things were not going well. After purchasing this, I discovered that what my on-tank flow meter said, and what was coming out of my torch were vastly different.I set my flow rate using this device, and TIG welding all of a sudden became SO easy. By far the best money I have spent on welding supplies. Trust, BUT verify........ (I put a piece of masking tape on the scale of my flow meter, and marked it correctly based on what was coming out of my torch.)

R**U

Flow indicator ball is jammed in bottom of flow tube.

As you can see from my pictures, the ball jams in the bottom of the tapered tube. While the ball is 7.9mm diameter, the bottom of the tube is 7.4mm, while the top is 9 mm. Here is the fix: 1)cut a small piece of plastic or metal tubing 5-7mm outside diameter, or stack some small washers to acheive the same. Make certain the spacer or tubing you choose, does not block the exit air hole of the black rubber adapter cone. 2) Using a drill bit or something else with appropriate dimensions, insert your spacer(s) into the bottom of the tube. It will keep the ball from falling too low into the tapering, where it will jam. 3) Reassemble the upper vented plug and the lower tapered rubber cone, onto the plastic flow tube. Done.

D**1

Junk.. no stars if I could

Junk. Bought 2 one doesn't work because ball is stuck all the time. Other one is abt 10 CFM off. On my part o didn't realize they weren't measured in CFM but they refused my refund within minutes ilof ordering. They said product had been shipped. Yeah right

J**J

RIVERWELD Argon Gas Flow Meter Scale

Its a nice tool to have around when you are checking your argon ga vrs what you are getting at the torch end.

B**S

Nice little flow gage.

When I first tried it the bann was stuck. I had to manually moveit to get it to work. Once freed it it appeared to work.

B**Y

I was surprised that the pressure would be so much less at the tip from the regulator reading !

Great price ! Works without any hassle !

J**A

Better than nothing

I used someone’s flow gauge at work (different brand) and thought it was something useful to have so I ordered this one. It’s very cheaply made especially compared to the one I used at work. It’s better than nothing I guess. The ball gets stuck in the bottom of the tube so you have to get that loose before testing gas flow. Feels like this wants to come apart really easy too

D**P

Can't be sure I trust the reading.

The ball likes to get stuck in the bottom and will not indicate flow.It reads several CFH lower than the flow meter on my Miller so the question comes up - - which one is right?Since the ball loves to stay stuck in the bottom I am going to keep trusting what the Miller gauge tells me and scrap this thing.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
S/.99

Duties & taxes incl.

Perustore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Riverweld Argon Gas Flow Meter Scale Tester Measure Flowmeter Tig | Desertcart Peru