Home Master ISetTMA8 Artesian And HydroGardener Replacement Water Filter Change Set, White

I installed this Perfect Water filter a couple of years ago and is the best thing. I religiously change the filters once a year and test the water with a digital meter. It's always better than the most expensive bottled water.

Easy changeover. We are so happy we purchased this brand of RO filter. Works great.

I've been using the Home Maser water filter for year now and to this day, I find it to be the best system out there. This system provides the highest quality of purified water IMO. Even better than buying most bottled water. Not only does this system purify water to its best, but it also remineralizes the water with the artesian water filter so you get the perfect PH balance and great taste. The system is easy to install and easy to swap out filters. Other systems require you to clean out the housing the filters rest in after every filter swap, this ones quick and easy because there is no housing to clean, you literally get a brand new clean filter every time so you know your not getting old residue going through the system after a filter swap. This system also provides the fastest water flow than any other system out there thanks to the premate pump. I will continue to use the Master Home water filter forever. The customer service is also amazing. They are always quick and willing to help you out if you ever run into trouble. Everyone should have one of these systems in their house. Way better than buying bottled water. This system pays for itself with how much clean drinking water I drink and use in a day. Clean drinking water is one of my most important priorities and this system meets my expectations in every way, if you don't already have one of these systems in your house, do yourself a favor and get one. Your friends and family will appreciate you.

These replacement cartridges are cheaper when purchased here on Amazon vs. the manufacturer's website. :)These are the steps I used when replacing them: 1. Shut off the tank and the water supply valves (one is at the top of the tank, the other is at the water supply, just follow the tubing around and you will find where it connects to the same line which is going to your sink faucet). 2. Once water is off, Open the RO tap and let it depressurize and drain. 3. Remove 1 filter at a time, being sure to pay attention to the flow direction, The filters are printed with the labels being printed such that the flow will be in the correct direction when the label is right side up, but it doesn't hurt to check the arrows. 3a. To remove a filter cartridge, press down on the colored plastic retainer and pull up on the tubing. 4. Inspect the tubing to make sure it isn't damaged at the end and that it is nice and round. IF this isn't the case then you will have to cut back the tubing until it is the desired flatness and roundness. (This is my second replacement and I haven't had to trim the tubing. 5. Install tubing into the end of the cartridge by pushing it in until it is firmly in place. This may take a bit of force. 6. repeat for all filters, doing 1 at a time. 7. Open water supply valve very very slowly (Do not open tank valve) and let the water run for 5 minutes or so. It will be a low flow/trickle of water in various color ranges from opaque white to carbon black, this is normal. 8. One you are sure the water is clear shut the supply water valve off. 9. Open the tank valve and let the system empty. 10. Close the RO tap and open the water supply valve very very slowly. Allow the tank to fill up completely (this will take a bit to do). 11. Once tank is full shut the water supply off and open RO tap to drain the tank. I usually empty the tank two to three times just to clean everything out nicely. (this may be overkill). 12. Once finished, open the water supply valve and enjoy your water!

This was my first filter replacement for my Reverse Osmosis kitchen sink water filter. There was no problem ordering the system. It was a good price. And I received it quickly.The filtered water tastes great. We use it for all our cooking and drinking needs. Especially tasty for me and my dog when we go on our Rocky Mountain hikes.I'd order from them again.

Thank you for everything

Home Master ISetTMA8 Artesian And HydroGardener replacement filters, got these replacement filters for my home Master Artesian Reverse Osmosis System to change my filters.The change was very easy, got it right the first time everything worked great and no leaks. I did not cut off quarter inch of the tube, instead I made sure it was nice and clean with clean water, and then I pushed it in the connector of the filter.Before you take off your old filters make sure you pay attention to the direction of the flow that is printed on them, you have to make sure you put your filter the same flow direction as the old one ( there is an arrow on each filter pointing up or down) . If you're having leaks make sure your tube is pushed in all the way.Remember to empty your tank at least once, I did it twice to be sure. Don't forget everytime you turn on the main value for the system, you need to do it slowly or you could damage the system.The filters have been in only for about 3 days but if something changes I will come back and edit my review but so far so good.I also had to put pressure back in my tank, so I bought a pump and a gauge. This is not something that you have to do with a filter change, this is something I had to do.This pump: https://www.amazon.com/gp/product/B00XLGKU14/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1This Gauge: https://www.amazon.com/gp/product/B01AAT7OMW/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1Both of those work great for me. Keep tank psi at max of 8 psi, but make sure tank is empty or your pressure reading will be wrong. The tank empty is 8 lbs (3.2 gallon tank). Once empty check the tank pressure with the gauge, and if its below 7.5 psi use the pump to add air.I also wanted to say thank you to Tim, the technician at Home Master (Tap Master) who was very understanding and very helpful and knowledgeable.