ANCEL FX2000-US OBD2 Scanner Diagnostic Tool, Engine ABS Airbag Transmission Code Reader, Check Engine Light Scanner for Vehicle Health Analysis, Compatible with Most 12V Vehicles

I picked this up to have a dedicated scan tool on hand, and it’s been a great addition to the toolbox.Setup was simple, plug it in and it’s ready to go. The menu is easy to navigate, and it pulls codes quickly without a bunch of guesswork. I like that it gives clear descriptions instead of just numbers, which makes it a lot more user-friendly.It’s been helpful for checking engine codes, clearing them, and getting a better idea of what’s going on before deciding on a repair. For basic diagnostics and even some more in-depth info, it does exactly what most people need.Build quality feels solid, and the screen is easy to read, even in less-than-ideal lighting.This is a great option if you want more capability than a cheap code reader, but don’t want to spend a fortune on a professional scan tool.Bottom line, reliable, easy to use, and a great value for DIY and garage use.

This scanner diagnostic tool has saved me countless times now. I’ve been stuck on the road when my car broke down and I plug it in and it tells me right away. What the problem is then I reset the system. My car starts up, and then I’m on my way.

Big Pluses:1. The scanner is great, I was able to get very detailed ABS system data and determine exactly what was broken in my ABS EBCM controller and not in my sensors. This was an intermittent fault that was causing my front brakes to drag. I could also see chassis codes and ECM codes that were very useful in troubleshooting. This scanner will not load or calibrate a new EBCM but it still enabled me to know exactly what part I needed and not get ripped off.2. It does come with a micro SD card already installed. which you need for updates.Small Cons:The website was easy to use and register so I could download firmware and libraries. You install an app on your laptop then download the libraries. Next you then plug in the USB and use the app to install files onto the sd card. Reinstall that into the scanner and then plug the scanner into the computer and run the updates through the app on the computer. Once it starts the progress bars will tell you when it is done, dont shut if off too soon, you can brick it. The pdf guide for updates did not match perfectly to how I was able to get it to work, maybe it was my laptop on Windows 11, I dunno, but it would not detect my scanner until the sd card with the updates was installed, then I could see it with the app.It is worth the small price IMO.

This little guy has a long list of capabilities and features. I've used it to track down my ABS problems on my vehicle and saved money finding my exact problem rather than just covering a broad spectrum of replacement parts to get my dash lights off. And I was even able to reset my abs lights with this tool instead of having to go to the MINI dealer so I'm very pleased with that.This is a very "middle of the road" tool it has a lot of good features, but it also lacks a lot of features you'd find in more expensive, and more comprehensive tools. For instance you can't really do many tests and you're limited to the code reading and in depth computer monitoring. But you can do more than just check and read simple engine codes. It'll do ABS, Transmission, engine, and some other premium features that a lot of cheap tools cannot. You can see live fees graphs of a plethora of systems. You can see each independent wheel speed to check your speed sensors. It'll even tell you when different switches are on like your brake switch to check if that's working if your brake lights are acting up. The system does run a little leggy sometimes, and I do plan to get a more in depth tool later down the road for testing and resetting more systems and such. But this tool will be used more often and will always have a place in my tool box. I love this little guy

I bought this scanner as a replacement for my old one that was the exact same but I had lost on a job site this scanner has proven to be the fastest easy and overall most reliable scanner I have tried after I lost my first one I ran through 7 scanners in the time span of 2 months before I remember the brand and got an identical scanner even compared to the tablet version from this company the scanner is faster although had less functions if you want it the have more special functions I would recommend the slightly newer fx3000 but this scanner is more than good enough for diy or beginners even techs who would like a simple scanner for day to day and have more specific scanners for when the functions are actually needed

Let me start of by saying that this product is very nice. It feels well made and has great features for the price. Registering the device is relatively simple, just follow all he steps in the guide and you will be fine.Now for the only complaint I have about this product is the quality of the display. As you can see in this picture the top right of the screen has light bleed (white semi circle) in it out of the box. Now it doesn't take away from the device in a major way but it is still inexcusable for a new out of the box product to already be showing signs of damage. If it wasn't for the bad display I would easily give this a 5/5 star review but for the time being it will remain a 3/5.Should this discourage you from buying it? I would say no, it is still an amazing product for the money but just be aware that it may come with some fault out of the box.

Awesome scanner for the price, was able to read SRS codes and engine codes. Would definitely buy again. it's not gonna give you more advanced features like key programming but for the price it's perfect. It has a lot of features that are good for DIY car repair. Updating the scanner is very easy if you follow the instructions. Wish it was bidirectional but can't expect much at this price point. The scanner is not too slow and the materials / build quality feels really good.

I had high hopes for this unit, unfortunately those hopes were quickly diminished. After the FX2000 arrived, I browsed through the manufacturers and their vehicles and there were ALOT not even listed. I have been a mechanic for over 35 years, so I know most American and quite a few European cars. I purchased this for my car (2021 Corvette Stingray Z51 HTC) and to use in my friends repair shop. CORVETTES ARE NOT EVEN LISTED! After seeing the "LACK" of American vehicle choices, I figured the new 2022 update would cover that issue. It was quite large for a scanner update. After the update was completed, due to the update size, I was expecting all vehicle issues to be fixed. I was WRONG. There were a couple vehicles added in each section but it still was missing alot. Even more shocking alot of the most "Popular" cars on the American side are not listed at all, cars that you see on the road everyday, and still no Corvette under Chevrolet?? You can use the basic functions of the scanner with any car that has an OBD2 port, but for the "Advanced" Diagnostics, you need to select a vehicle manufacturer and model, this is where the problem is. If I wanted basic Diagnostics, I would have bought a basic plug in OBD2 Scanner that plugs in and goes to my phone over Bluetooth. My BlueDriver is leaps and bounds ahead of the FX2000. For the price of his you should be getting MUCH, MUCH MORE. Save your money and go with a different brand because you have 50/50 odds your car will even be listed on this scanner. If your looking for U.S. vehicles only, I suggest BlueDriver. The BlueDriver has everything and more than this unit and you can email your reports. With this unit,byou have to connect to a computer using a USB cable. I do not work for BlueDriver, it was my favorite scanner but I lost it somewhere and the FX2000 listing looked promising so I thought I would try a different brand. Big Mistake.I know this review is under the name "lisa" but I'm her husband and mistakenly purchased the FX2000 while logged into her account.Trust me when I say save your money or get more money for a better scanner. Myself, I'm going back to my trusted brand. BlueDriver, which by the way has wireless updating and more features than most high dollar scanners. Save your money,take your time and do research on the scanner you end up buying. A item listing isn't always what's stated "Don't Believe The Hype" research and offsite reviews are your best bet.Thanks for listening (reading).

Válido para Kia Carnival, también es válido para muchos más vehículos. Totalmente satisfecho

Lo compre para un BMW y resulta que únicamente sirve para la camioneta x3 de toda la marca, para otras marcas es bueno.

6 cylinder engine scanning tool 🔫

Après un achat d’appareil à 37€, 99€ et 118€, ce dernier en promo à 149€ est le seul qui m’a enlevé le défaut airbag voyant rouge sur Bmw e90.. qui est en fait un petit soucis électronique rien de méchant. Du coup très satisfait. La qualité se paye, ce produit étant à la base aux environs des 200€ il est de ce fait de bien meilleure qualité et beaucoup plus performant que les autres.

I purchased this to pull SBS codes on my Nissan which it did flawlessly, worked as well or the same as snap on diag tools I had used in professional settings years ago. I did attempt to pull ABS codes on a GMC and it didn't fair as well ; HOWEVER it has its file set on an SD card and it didn't auto-detect like the Nissan did so it could be just user error. Recommend this at its price point, will come in handy .