EMAX ES08MA II 12g Mini Metal Gear Analog Servo for RC Model (Pack of 4)

Used 6 of these to build out the kit version of the Lentus Thermic, a 3m sailplane. Works great.

Affordable and good servos. For the price, you can’t compare its quality to other manufacturers selling servos for 50$ and up. They last awhile and do a great job.

Bought two one burnt out, might not be the maker but the user, the other two I have have worked for a year so pretty good just be careful about burning them out.

These appear to be a quality product with a good competitive price. I have used them in several rc plane builds. Many of the precut servo mounts needed to be enlarged slightly to accommodate these servos. Really a non-issue.

I purchased the Axial SCX24 JLU and while it was fun, I found the stock servo to be somewhat lacking in power while on an incline. So, I looked around and came across these as a suggested replacement. Yes and no. The width (AS-1 vs ES08M) is 21.3mm vs 23.6mm (give or take). Off the bat you know you'll need to mod the stock servo tray. Either fidget with it a bit or buy a replacement that will fit the ES08M. You'll be better served if you trimmed the servo screw mounts a bit so it'll fit neater within the chassis. On my SCX24 JLU, it was just BARELY in between and would rub or hang when flexing. The wire comes straight down on these vs the AS-1 where it comes out directly at the sides. The cable is pretty damn long at about 250mm compared to the AS-1 at 58mm. That's pretty damn long for a tiny servo. Did I mention it was taller? So instead of the steering rod links being parallel with the front bumper, it'll stick out about 2mm. Not an issue but in case you're tight for space. So that's the jist for fitment.It's noisy but has some power. Obviously since it is a bit stronger it'll make a little more noise. Now, noise is subjective so keep that in mind but I did notice these were noisier than the AS-1.All in all, these are about the only ones you can buy to replace the stock AS-1 servo if you need something stronger. If you do find a smaller one that's just as strong if not stronger, reply and let us all know.

I’ve put these in 3 Scx24s and they are a definite upgrade from stock especially when paired with aluminum steering links as for how powerful they are I couldn’t tell you because I run as little weight on my rigs as possible if I don’t need to add brass I don’t but I ordered a portal kit and these servos turn it with no problem I would say it’s with it for a cheap upgrade

Received everything as described. Thank you

a MINI servo should be 27-30g, and 13mm W x 32mm L.these are 12g, and 11.5mm W x 23mm L. not even close, as per motionrc.com/blogs/motion-rc-blog/servo-size