Grin Technologies Statorade Electric Bike Hub Motor Cooling Ferro Fluid (10ml)

Grin Technologies Statorade Electric Bike Hub Motor Cooling Ferro Fluid (10ml)

Q: for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

In general, the Statorade will naturally settle on the magnets once the motor spins for a short while. Sealing the casing with silicone should be fine, but I cannot speak to how well that motor is sealed. Please keep in mind that Statorade is not to be used with geared motors, as it will only serve to trap heat inside the motor. I was not able to find information online whether or not the Xiaomi M365 Pro is direct drive or geared, so use at your own discretion.

Q: again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

As long as it is a direct drive motor and the motor side plates are sealed, then about 4mL should be sufficient for a small hub like that and you only need to add it once for life. If you don't have a good side cover seal though, then it could leak out over time and require replacing.

Q: Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Yes, it's very easy to clean it out with an absorbent cloth or paper towel. But if you have the motor open to either add or remove Statorade from magnets, you can also see very clearly what style of motor you have too! The only ones where it will have a significant cooling effect our direct drive outrunner motors.

Q: Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Yes it will, any direct drive hub. Add Hubsinks to get the full effect though. If the motor casing can’t shed the extra heat Statorade transfers from the core, it won’t do much good.

4.6/5

ID del producto: 736436564

Transacción segura

Detalles

Brand
Grin
Voltage
12 Volts
Material
Magnetite
Item Weight
1.6 Ounces
Manufacturer
Grin Ltd

💧Precise 10ml dosing with Luer Lock syringe

🔥40% boost in continuous motor power

❄️Doubles motor cooling capacity

Comprados juntos con frecuencia

Grin Technologies Statorade Electric Bike Hub Motor Cooling Ferrofluid (10 Ml)

HubSink V2 E-Bike Hub Motor Heatsink for Improved Cooling and Performance (QS205)

Descripción

❄️ Cool your ride, power your journey — don’t get left behind!

NEXT LEVEL COOLING - Double your hub motor’s cooling capacity to extend performance and longevity on every ride.
MESS FREE PRECISION - Innovative Luer Lock syringe lets you inject fluid through tiny 2mm holes without spills or waste.
PLUG PLAY UPGRADE - Easy to apply, no batteries or complex tools required—instant performance enhancement.
LIGHTWEIGHT COMPACT - Only 10ml needed—adds negligible drag and weight, keeping your ride sleek and fast.
POWER UP WITHOUT OVERHEAT - Boost your e-bike motor’s continuous power by up to 40% while keeping it cool and efficient.

Grin Technologies’ Statorade is a 10ml magnetite synthetic ferrofluid designed to dramatically improve direct drive e-bike hub motor cooling. By doubling cooling capacity, it enables up to 40% more continuous motor power without overheating. The included Luer Lock syringe ensures precise, mess-free application even through tiny 2mm motor holes, making it a lightweight, easy-to-use upgrade for serious e-bike enthusiasts.

Presupuesto

Manufacturer	Grin Technologies Ltd
Part number	Statorade_10mL
Item Weight	45.3 g
Package Dimensions	20.29 x 10.9 x 2.9 cm; 45.36 g
Is Discontinued By Manufacturer	No
Size	10 Ml
Material	Magnetite Synthetic
Voltage	12 Volts
Measurement System	Metric
Batteries Included	No
Batteries Required?	No

¿Tienes una pregunta? Mira lo que otros preguntaron

for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Meera L.

Transacción sin problemas y el producto llegó en perfectas condiciones.

Hace 3 semanas

Anjali K.

La calidad del producto es excelente. Exactamente lo que necesitaba para mi trabajo.

Hace 1 mes

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Farhan Q.

El tiempo de entrega fue excelente y el embalaje fue seguro.

Hace 2 meses

Alí H.

Envío rápido y embalaje excelente. La herramienta Leatherman parece de primera calidad y resistente.

Hace 1 día

Ver todas las reseñas de confianza