50ml 2-Part Transparent Epoxy Glue - Adhesive for Granite, Marble, Tile, Concrete, Wood, Plastic - 1:1 Mix Ratio - Two-Part Epoxy AB Glue - 2pcs Mixing Nozzles

Great price and better then expected results. Being less expensive i wasnt sure how good it would be. Mixing tips have made my job much easier and you can buy them in bull at a really great price! Also since using this epoxy with the gun/applicator these tubes go much further then mixing by hand! Epoxy is very strong and clear works great!

Highly recommend

Extremely strong bonding power for granite. I used the diamond blade and made a couple cuts in each mating surface about 3/8 deep for added strength and it worked perfectly.

No plungers or instructions on how to use. I’m not the most handy but thought it would work for a mosaic project just to adhere the tint tiles on before grout but it didn’t work (elmers glue works better). Also because I don’t have a calking gun and it didn’t have plungers I decided to cut open the tubes and mix together that way and do not do this, the mixture got so hot it melted the plastic container I was using.

This worked to glue/adhere two pieces of quartz together. Worked great, but turned yellow as it cured. Not something I could use for exposed seams or glue joints.

I Refinish wood floors and use this for knot holes and other repairs. This is quick drying which lets me sand it off in a timely manner.I ordered many times but the new batch cures super yellow which makes this unusable to me. Shame cuz I really liked the cure time.

Seems like a regular epoxCONS was missing the plunger handle so as I was pushing the back of the tubes down with chop sticks they turned sideways and do I had to use whole tube at once.PROS had mixing attachment so when it comes out it is mostly pre mixed.OTHER MIGHT BE GOID OR BADFast setting you only have 5 minutes or less to mix and apply . sort of easy glowing do it goes into recessed easily but will glow down a vertical application.Would not buy again as missing plunger handle is a deal breaker.

Is easy to work with using the application gun and mixing nozzle. 5 minute work time and a good bond after an hour.