Universal TV Stand, Table Top TV Stand Base Replacement for Most 37 to 86 Inch LCD LED TVs, 7 Height Adjustable TV Legs with Cable Management Hold up to 150lbs, Max VESA 800x600mm, Black AX10TB01

Super heavy package. Gave me confidence.Took me about as long to read the directions as to put it together. Only needed help to lift it onto the table after (cant really move a 75 inch by myself) otherwise did it alone. Holds my tv extremely well.If there was a major earthquake it might tip over but extremely sturdy. Seemed like my entertainment center would come tipping over with it in that case. Feet stick extremely well to my surface.Probably varies by tv how low/high you can get it but with mine I could lower it all the way to the base and could go up another 6 inches from the hight in the picture at least.Tried to put all the mounts through the actual holes and not the slot at the bottom, wasn't a perfect fit. You can see the one hole has some silver from where I tried. Screws fit great once I made that adjustment.Sturdy, good looking, cheap, adjustable. Came with multiple types of screws and other fittings. Easy to assemble. I shop around, I dare you to find a better one at this price.Forgot to mention it would make a good purchase if your looking for an entertainment center for a smaller size tv as it puts the feet closer together, about 18 inches less wide footing than the original legs. Would have gotten a different one if I had bought this first.

Works great, sturdy and stable. Adjustable height so you can raise the TV above the sound bar, dvd player, the cable box. Looks great. Great value.

Good & sturdy ! Holds 82 inch just fine! Definitely worth the buy!

I don't normally write reviews. This seems sturdy. I don't know how it would do with a smaller tv because the legs/feet would be pretty close together. The main reason I got this is I needed to fit my center channel speaker. This does the job with ease. I could adjust it so the bottom is higher up still. The way I have it setup is it gives about 8 inches of clearance between the top of the feet and bottom of TV. Seems sturdy with a 75 inch tv. Also have another one on a 60inch and that is sturdy as well. The only reason I didn't give 5 stars is because it lacks the ability to tilt the tv at all.

I used to have my 75” tv mounted on the wall years ago and since that time I have lost the original stand legs. Luckily for me, there’s a product out there that helped solve my problem. These TV stand legs fit perfectly for my TV and we’re very versatile so that they can fit most TVs out there on the market. The assembly was easy to do and follow the step-by-step instructions that came with the kit! They have height adjustments and look great in my opinion. I love the tv stand now and is a good bang for your buck!

I really didn't want to hang my 80" TV on the wall of my new house plus the location we wanted the TV wasn't conducive for wall hanging. Once I saw this product that was a game changer. Easy to install and it's adjustable. I have the TV on the console and it's great. Way easier than hanging

The stand is sturdy and well made. It is also adjustable. Supports 85 inch TV well.

The media could not be loaded. I had to move a very lightweight Insignia 37 inch Fire TV from a standard height TV table/stand to a desk table located at the foot of a guest room bed and raise the TV a few inches so it will be watchable. See attached photo. The factory legs install points were wider than the new table location. See attached photo. The factory TV legs only has about a two inch gap from the bottom of the TV to the table surface.Some reviewers are happy with this product, some are not. I am not. Here is the good and bad based on my experience...***** THE GOOD *****The stand arrived well packaged in a thick cardboard box. See photos.The stand comes with an assortment of mounting screws, washers, spacers and a cable management clip. See attached photo. My TV came with its own mounting screws which I used. I did not need any spacers or washers. To be fair all TVs are not made alike so the supplied screws may or may not work for you. In addition to thread size the most important part is the correct screw depth (not too long) to avoid damage to the TV. If not sure of the correct screw thread and depth contact the TV manufacturer. The following metric screws are supplied:M4x12M6x12M6x30M8x20M8x45Assembly is straightforward and not difficult. Printed instructions are included. All mounting holes lined up perfect. A 3mm Allen wrench is included if you need it. There were no defective hole threads. See this review “The Bad” section on screw quality.The feet has for rubber adhesive pads included, but not factory installed. The stand will stay in place on most surfaces, will not slide and will require the entire TV to be lifted to move it around the table surface. An alternative it is use adhesive felt pads or other material. In any case something must be attached to the feet to protect the table surface from damage. I have no problem with this except as noted in this review “The Bad” section.The height selections should be sufficient for most people. The stand would have worked for my 37 inch TV without using the upper part of the vertical mount. The distance from the bottom of the TV to the table would have been about a four inch gap. Since I needed raise the TV at least eight inches or more I used the upper mount part.***** THE BAD *****First the screw quality. The screws are poor quality and made of somewhat soft metal and can easily strip. Instead of using the supplied 3mm Allen wrench which can be PIA for many screws I used a socket wrench with a 3mm male socket. I've done many DIY projects over the years and understand about not over tightening and possibly striping screws. I decided to tighten the first screw just a hair more and it started to strip. Luckily I caught this in time.CAUTION!!! Tighten the screws just enough where they will not easily move. Another reviewer noted that the one of the screws attaching the stand to the TV stripped. Bad news. As a comparison I used the mounting screws supplied by my TV manufacture (Phillips head) which are good quality. I was as able to get a tight connection with ease and without deforming any part of the screw heads.Suggestion: many manufactured products are notorious for supplying low quality screws. Since the screws attaching the stand to the TV is a critical connection, whether using this stand or another brand determine the the thread size, length, purchase known quality screws and use those instead.Here is the deal breaker...I used just two fingers and lightly put pressure on the side of the TV. The stand legs started to flex making the stand unstable. My TV is a lightweight 37 inch. I could imagine the results for a larger heaver TV. See attached video.My thoughts are the main reason for the stability issue is there is no horizontal support. A horizontal piece could have been added to the stand behind the TV and another between the stand feet. The distance between the feet is determined by the horizontal distance between the mounting screws. My TV mounting points are VESA 200x200 which is about eight inches. See attached photo.