Lucas Oil 10063 Engine Break In Oil Additive w/TB Zinc Plus - 16 Ounce

Lucas Oil 10063 Engine Break In Oil Additive w/TB Zinc Plus - 16 Ounce

Q: What are the zinc and phosphorus concentration rates? Are there any dilution charts?

Lucas Product# 10063 is a zinc additive for engine oil. Its designed for engines with no catalytic converter in the exhaust (pre-1977 cars/trucks) and race engines. This product is also used as an engine "break-in" additive for newly built engines. For non-race applications, one bottle will usually treat two oil changes. Some race-engine applications require the entire bottle. Classic cars (depending on oil capacity) require approximately 2,100 PPM (Parts Per Million) zinc in the oil. Phosphorus levels are not published for this product. Coupon Available. Voted Top in service, warranty and support. Thank you for your interest. FamilyGoKarts 800-950-2210

Q: I have a 1989 dodge with a 5.9 cummins and used shell rotella 15w 40 but in just about all oils for highway use they remove the zinc out of the oils.

Yes! Flat tappet cam as well as pre-1996 engines require this additive. It is a wonderful product, I use it in all of my vehicles as well as the Lucas ATF supplement

Q: Could/should this be used on a older worn engine to extend its life? No breaking in. Just protecting the engine for further wear.

Yes I use it on a 350 small block that has 150k, the zinc does help, but it wont fix worn parts like bearings..etc.. Whenever its down a quart I add that, its expensive but even if it offered a 10 percent lubrication benefit, its still worth it for me. I bought this one for a 383 stroker with rollers

Q: If I use this for a rebuild, should I still go easy on the engine for the first few hundreds of miles? Or should I go 70-80% of redline?

Take it a little easy for the first 500 miles. Make a few medium acceleration pulls, a few hard acceleration pulls. Let the engine slow the car when you do this not the brake. After 500 change the oil and you should be good to go. Not a bad idea to change oil again after the next 500-1000 miles either

4.8/5

ID del producto: 277772888

Transacción segura

Detalles

Viscosity
10W-30
Brand
Lucas Oil
Liquid volume
16 Fluid
Package information
Bottle
Vehicle service type
Car

⏱️Dyno tested for faster engine break-in

⚙️Extreme pressure additive for max protection

🛡️Prevents premature wear on flat tappet cams

Comprados juntos con frecuencia

Lucas Oil 10063 Engine Break In Oil Additive w/ TB Zinc Plus - 16 Ounce

Lucas Oil 10631 SAE 30 Racing Engine Break-in Oil - 5 Quart

Motorcraft FL-1A Oil Filter

Descripción

⚡ Break in like a pro, race like a legend!

SPEEDY BREAK IN - Dyno-validated to accelerate ring seating and reduce blow-by for peak performance.
DURABILITY BOOSTER - Enhances valve train and camshaft longevity by preventing premature wear.
FLAT TAPPET SAVIOR - Specially designed to safeguard flat tappet camshafts during critical break-in periods.
RACE READY PROTECTION - Exclusive extreme pressure formula engineered for high-stress racing engines.
UNIVERSAL COMPATIBILITY - Works seamlessly with both conventional and synthetic motor oils in any racing scenario.

Lucas Oil 10063 Engine Break In Oil Additive is a 16-ounce, dyno-tested formula packed with extreme pressure additives and TB Zinc Plus. It accelerates engine break-in, protects flat tappet camshafts, and reduces wear, making it essential for racing and high-performance engines using conventional or synthetic oils.

Presupuesto

Manufacturer	Lucas
Brand	Lucas Oil
Model	Lucas Oil 10063 Engine Break In Oil Additive w/ TB Zinc Plus - 16 Ounce
Product Dimensions	19.61 x 5.72 x 2.44 cm; 463 g
Item model number	LUC10063
Exterior	Painted
Manufacturer Part Number	10063
OEM Part Number	10063
Item Weight	463 g
Viscosity	10W-30 sae_grade

¿Tienes una pregunta? Mira lo que otros preguntaron

What are the zinc and phosphorus concentration rates? Are there any dilution charts?

I have a 1989 dodge with a 5.9 cummins and used shell rotella 15w 40 but in just about all oils for highway use they remove the zinc out of the oils.

Could/should this be used on a older worn engine to extend its life? No breaking in. Just protecting the engine for further wear.

If I use this for a rebuild, should I still go easy on the engine for the first few hundreds of miles? Or should I go 70-80% of redline?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Vikram D.

La funda MOLLE es de una calidad excepcional. Estoy muy satisfecho con mi compra.

Hace 2 semanas

Por Neha S.

Excelente comunicación durante todo el proceso de pedido. El producto es perfecto.

Hace 2 semanas

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a más de 300 millones de compradores en más de 200 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

S/.203

Derechos e impuestos incl.

Perualmacenar

Envío gratis

with PRO Membership

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Vikram D.

La funda MOLLE es de una calidad excepcional. Estoy muy satisfecho con mi compra.

Hace 2 semanas

Por Neha S.

Excelente comunicación durante todo el proceso de pedido. El producto es perfecto.

Hace 2 semanas

Ver todas las reseñas de confianza