---
product_id: 119673976
title: "Ironwood Pacific E-Z Slide Trailer Slides | Kit 1"
brand: "ironwood pacific"
price: "FREE"
currency: PEN
in_stock: false
reviews_count: 8
category: "Sports"
url: https://www.desertcart.pe/products/119673976-ironwood-pacific-e-z-slide-trailer-slides-kit-1
store_origin: PE
region: Peru
---

# Ironwood Pacific E-Z Slide Trailer Slides | Kit 1

**Brand:** ironwood pacific
**Price:** FREE
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Ironwood Pacific E-Z Slide Trailer Slides | Kit 1 by ironwood pacific
- **How much does it cost?** FREE with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.pe](https://www.desertcart.pe/products/119673976-ironwood-pacific-e-z-slide-trailer-slides-kit-1)

## Best For

- ironwood pacific enthusiasts

## Why This Product

- Trusted ironwood pacific brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Ironwood Pacific&apos;s E-Z Slide Trailer Slides mount directly to your trailer bunks to enable your boat to slide smoothly on and off the trailer. The BunkEnders mount directly to the high wear at the end of your trailer bunks, protecting the carpet while you launch and load your boat. E-Z Slides Kit #1&#xA0;consists of 8 E-Z slide pads - 1.5&quot;w x 10&quot;l and stainless-steel screws. Our E-Z Slide Trailer Slides are ideal for shallow ramps and low water launching, eliminating the need to fully submerge your trailer bunks. Key Features: Molded from slippery plastic composite to minimize friction between your boat and the trailer bunks when launching and loading your boat. Trailer bunk slides easily mount directly to your trailer bunks with included stainless screws. Patented BunkEnders fold over the end of the bunk to prevent carpet wear. All E-Z Slides are 10&quot; long, BunkEnders are 8&quot; long. BunkEnders will fit both 4&quot; or 6&quot; wide trailer bunks. Comes with stainless steel screws for mounting. Recommended for metal boats up to 4,000lbs and fiberglass boats up to 1,500lbs. Not recommended for boats with painted bottoms.

## Features

- Kit 1 Includes: 8 E-Z slide pads - 1.5"w x 10"l and stainless-steel screws
- Slide your boat smoothly on and off your bunk trailer
- Slick high-density polymer is built to last in a marine environment
- Space your E-Z Slides along your bunks and attach with included stainless screws
- For metal boats weighing up to 4000 lbs and fiberglass boats weighing up to 1500 lbs. Made in USA

## Images

![Ironwood Pacific E-Z Slide Trailer Slides | Kit 1 - Image 1](https://m.media-amazon.com/images/I/318xMccB2kL.jpg)
![Ironwood Pacific E-Z Slide Trailer Slides | Kit 1 - Image 2](https://m.media-amazon.com/images/I/61mnFUK0pqL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    Fantastic
  

*by B***7 on Reviewed in the United States on October 25, 2018*

I have an aluminium 15-foot bass boat, weight about 1200lbs. After rebuilding the old trailer I decided I needed a way to load the boat more easily. The boat was set up on blocks in my carport. After I had finished refurbing the trailer I slide the boat trailer up under the boat. Without it being in the water the boat slide easily onto the trailer. I had to adjust the front stop and was able with the help of my neighbour to side it back to the correct spot. I was amazed at how easy it was to move.Make sure your boat is latched down there is no doubt it will sild off the trailer if it isn't tied down.

### ⭐⭐⭐⭐⭐ 







  
  
    Works like it should.
  

*by R***D on Reviewed in the United States on July 7, 2017*

Works as advertised and does exactly what I expected.  Using on 16 ft. flat bottom Jon on a tilt trailer.  Use care when launching as other reviews have said.  Makes it much easier to load and unload.  I'm purchasing a winch with a hand brake to control the slide using the tilt trailer.You will scuff the bottom of the boat and lose a little paint, but that is to be expected and is a very minor trade off as far as I am concerned.  So far no adverse affect on the rivets**Update:  after writing this review I decided to take another look under the boat, and apparently I was mistaken.  A few of my rivets have apparently been adversely affected by the pads.  Worse case is that a couple of them have received some significant scoring.  My guess is that the rivets sit deeper than the screws are recessed inside the countersunk mounting holes.  I may be wrong about this, but I don't know any other way it could have scored the rivets that much.  It is significant enough that I have decided to remove the pads and go back to carpet.  I just ordered a can of "Liquid Rollers" off of Amazon, and will coat the new carpet I have to now install (after cutting out spaces for the pads) and see how that works.  Keep in mind that I launch my Jon in shallow water using a tilt trailer--which means I do not back it into the water and float the boat on and off.  I slide the boat off the bunks to launch full tilt, then winch it up full tilt on the bunks.  If you have t tilt trailer you know what I am talking about.  Probably not the best way to go for a riveted bottom it seems.  It was worth a try, but I'm going back to carpet and try the liquid rollers.  Not trying to bash this product.  Just sharing my experience in hopes that it helps others make an informed purchase.Lastly, I am confident that if I didn't have a riveted bottom boat, I would keep the pads on.  They work well other than the aforementioned issue.

### ⭐⭐⭐⭐⭐ 







  
  
    They work!
  

*by B***T on Reviewed in the United States on June 17, 2019*

Quality product and easy to install. Even came with stainless screws. Most important part however is that they really do the job. Boat now just slides off the bunks with almost zero effort.  Certain tides at certain ramps in my area make it really difficult to get the trailer out far enough into the water to float the vessel off the bunks and previously required a lot of back straining effort to push the boat off the trailer and into the water when launching. Now with these EZ slides, well the name says it all. Makes it really easy to real the boat in to with your winch when returning to the ramp. I also purchased another brand and they do the job ok but these were much easier to install.  Pay attention to the width you need because they do come in different sizes. The ones i ordered were narrower than the end caps i ordered with them. I made it work by just doubling the slides side by side. I would definitely recommend these slides.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.pe/products/119673976-ironwood-pacific-e-z-slide-trailer-slides-kit-1](https://www.desertcart.pe/products/119673976-ironwood-pacific-e-z-slide-trailer-slides-kit-1)

---

*Product available on Desertcart Peru*
*Store origin: PE*
*Last updated: 2026-11-17*