Pelton PMA Generator ME1112 Wheel Water Power 0-240 VAC 4000 Watt Micro Hydro

Descripción

PMA Generator ME1112 Pelton Wheel Water Power 0-240 VAC 4000 Watt Micro Hydro ABOUT THE PRODUCT: This is a new Permanent Magnet Generator for use in Water Generation Projects designed by Motenergy, Inc. It is rated at 2000 watts at 1400 pm, and up to 4000 watts at 2800 pm. Motenergy Part Number ME1112. Comes with a Pelton Wheel. Part Number ME0903. The product has a stainless steel shaft that is designed to fit the Motenergy ME0903 Pelton Wheel. The output is 3-phase, Y-connected AC, and it can be converted to DC with the use of a 3-phase Bridge Rectifier. It has a 7/8 inch diameter shaft with a 3/16" keyway. The output is set for over 11.5 amps AC per phase, which means you can get 16.3 amps DC from a 3-phase bridge rectifier. This is a continuous 16 Amps DC, 24 hours per day, 7 days per week. There are two windings on the alternator. The main 3-phase winding (A-B-C), and a second single-phase winding (D-D) good for 10 amps. The second winding has 1/10th the turns and 1/10th the output voltage of the main winding. It is labeled D-D in the drawing below, and good for about 100 watts to run 12 VDC lamps or indicator lights. The 3-phase voltage (A-B-C) is set to provide 12 VAC at 140 rpm and 200 watts, 120 VAC at 1400 rpm, and 2000 watts. At 2800 rpm, you will get 240 VAC and 4000 watts. The fan works best when the generator is run in the Clockwise direction, looking at the shaft. This is a 12 magnet, 12 poles, (6 pole pair) rotor, so the output frequency is calculated as Speed in RPM/60 * 6.