iJDMTOYOEM Fog Bezel Fit 6-LED High Power LED Daytime Running Lights DRL Kit Compatible with 2013-2016 Scion FR-S FRS

Really nice quality LED DRL bezels. I'm not a very good DIY'er but with good instructions (or a lot of online research & youtube), I do well. However, the instructions on this product isn't the greatest, not enough to dock a star though because the product is really good. I did a little research and combined the knowledge that I acquired to do the install myself (local shop wanted $60 to install this). I used a combination of a YouTube video, some webpage (linked at bottom), and some forum posts to determine my strategy for the wiring and where I'd tap in to the 12v ACC/Ignition power. Most instructions I found said to tap into the power in the 12v charger adapter inside the glovebox. This would require you to have to go through the firewall and remove the glovebox to get to it. First off, didn't want to go through the firewall and secondly, the power wire seemed a little too short to reach (but apparently others have done it this way).DISCLAIMER: Here's how I installed this product. Follow it at your own risk/discretion. I'm not a pro and I'm not responsible if you choose to follow how I did it. This is meant to be helpful. If you are not comfortable with wiring or electrical, please have a professional install this for you!!!How I Installed these. Tools & Items needed.- Needle Nose Pliers to pull the fuses.- Wire Stripper / Crimper- Low Profile Mini Fuse Tap: Lumision FAST Shipping* ADD CIRCUIT BLADE STYLE APS ATT LOW PROFILE LP MINI FUSETAP FUSE TAP + 5AMP FUSE- Car Trim Pry Tools: Leegoal New Car Door Clip Panel Audio Video Dashboard Dismantle Kits Installer Pry Tool- Electrical Tape- Zip Ties- Dremel Tool- SharpieI used my trusty fuse light probe to determine which fuse in the engine bay's fuse box I can tap that would be a good candidate for the 12v ACC/Ignition fuse. Meaning, it would only be "on" when the key is either in the ACC/On position or the car is on and running. You don't want the lights to always be on and drain your battery. I found that the "IG2" (see my attached photo) was the one that worked for this! Plus it was positioned in a way that the wire would come right out the front of the fuse box, with some modifications.I used the Low Profile Mini Fuse Tap to plug in to that fuse slot. The 5AMP fuse worked for the LED DRL's, by the way. But after installing it, I had to cut my fuse box with a Dremel Tool and smooth out the cut. FYI, I used a cutting wheel to and sanding bit on my Dremel to cut then smooth-out the cut because I didn't want any sharp/rough edges to slowly wear away the wire. I first used a Sharpie to estimate where I needed to mark before I started the cut (see photo). I also had to cut off a little tab under the fuse box that was hitting the wire. After I made these modifications to the fuse box, I was good to go. I used the Trim Pry Tools to safely remove the original bezels, then wired everything up and installed them. I'm going to add some links below that helped me determine my strategy in installing these LED DRL's lights. After I installed everything, wired it all up, zip-tied the wires for good wire management and secured the control box, I tested everything and it works GREAT!! I've been up and running with this install for a month now without any issues. I also taped the hole up a bit with black electrical tape and taped up the crimped connection from the Fuse Tap to the Power Wire of these LEDs. Just to make sure everything stays nice and secure and weather-resistant.Here are some helpful resources that was beneficial to my install:http://store.ijdmtoy.com/Scion-FR-S-Install-LED-Daytime-Running-Lights-a/556.htmYouTube video (but he installed through the firewall and quick spliced to the power cable in the glove box):https://www.youtube.com/watch?v=19kW9Lzj6K4Overall great product. Tricky install for a novice but doable. Makes a big difference to modernize the look of your FRS!

Easy to install and they are super bright! Only lasted 2 weeks before the passenger side went out . Funny how they only warranty it for a month it's about what it last. Guess you get what you pay for .

Good quality LED's, fairly painless install. You will have to do some wire management after you are done and, if you decide to connect the blue or white wires for the dimming and turn-off features, you will have to do some extra soldering, but its all pretty easy. They look KILLER with my Winjet HID headlights - they have LED runners on them too, very similar to the picture of the product. I also blacked out the blinker housings and put LED's in the blinkers too. If you get the right ones, they will be white light and on with your parking lights, and then change to amber when you use the turn signal. Gotten a lot of compliments on how mean my car looks driving behind you at night! These are a really cheap and easy way to add a lot of cool-factor to your FR-S.

Waste of money. The drivers side did not fit correctly when I received them and I contacted the seller, but instead of sending me a replacement, they kept insisting that my installation was wrong, not their product. Now just 4 months after my purchase, the drivers side light has given out. I contacted the seller once again and it turns out that they only offer a 90 day warranty and mine just ran out. Don't buy these lights. They are cheap and will conveniently die right after the warranty is over.

I Bought these lights for my FRS. The Lights Look great with the car especially the limited edition FRS that has Xenon Headlights. Very bright and great in fog. Look great, works well high rating by my standards.

Item was easy to install and the shipping was super fast, got the package a week before the expected date. Had some initial problems with the product but the seller was able to help me out with my issues. Wiring was simple and straight forward, fitment was good too overall a good product.

Bought these to hopefully replace the oem ones which no longer worked, installed the bezel and it didn't fit flush at all, stuck out and was very obvious, I pushed that aside since I really wanted the DRLs to work, low and behold I begun to connect them they didn't turn on, the red wire and black wire were way to short to reach either the cigarette lighter accessory wire or the ground near the battery, the instructions were unclear and made little sense, since nothing actually seemed to be like that which was described, and even after struggling to finally connect everything they didn't turn on. Maybe I did something wrong, but I am nearly certain everything I did was correct, everything was installed and connected and even then wouldn't work.

Awesome easy to install great looking my car it's looking the best! !!! I would recommend very high level of profecinal by seller! !!.