SCOTTSports 233925-0003 Blue Radial Full Waffle Motorcycle Grips

I ordered these grips as a replacement pair for my 2002 Kawasaki KLR 250. My last grips were getting ripped/worn, so i decided it was time for me to buy a new pair. Installation was fairly easy, as the previous owner of my motorcycle had applied some silicone to the grip area so putting on new grips is easy. The grips themselves are larger on the right for the throttle, and smaller on the left for the other handgrip. I Applied a solution of soap/water to help put these grips on easier, but it was already pretty smooth of a process so it just made an already easy process a breeze. These grips themselves are pretty hard, I wouldn't recommend them for the casual rider around town, unless you're wearing gloves, as just using them for the first couple rides has my bare hands roughed up. [I'm a squid i know!] The gloves themselves are pretty nice though, and have a quality feel that you don't usually get with cheaper gel handgrips by other offbrands. In summary - if you want cheap overall good quality handgrips, these are it, a little tough on your hands, but it's worth it for the extra grip.If you finished reading this, please make sure to rate it as helpful! It takes only a couple seconds and helps me out alot as an amazon reviewer! Thanks so much - D . Krause

If these are too short for your bars, and you have your old grips you are taking off which had fit correctly, you can do this:Just cut the ends of your old grips and leave enough room to keep sheering and cutting until they even up with where the newer Scott grips are installed.I used a knife to cut a whole through the end cap of the Scott grips so that I could do this. It feels a lot better having the grips extend all the way out and to cap the ends of the bars. They do not look very pleasant otherwise if there is spare handlebar and handlebar hole visible.Gorilla glue will work very well for the older grip caps, attaching them to where the Scott grips end.I used gorilla gel adhesive to get the new Scott grips on over the bars.Be very weary of the permanent glue dragging up through the inside of the grips on the throttle side.It may drag and ooze out of the end of the direction the new grip is being pushed toward. You don't want the glue getting in to where the throttle is supposed to move and have its free-play. + also get them on really quick. You'll know they will stay on well by how much of a pain in the ___ it is to slide and scoot these grips on their travel to the correct position onto your bars.That's good, however! They shouldn't come loose! If they ever do I will try to update it on here and also say how long it took to do so.I've been riding these for several weeks now and I think the grips feel great. There isn't a harsh vibration with these thinner style grip paddings in my experience. The whole ride experience has changed for the better... feeling more control, and more of a secure response out of the bike. (Who would have thought!? I replaced out 1980 OEM grips!) Definitely a good deal for the affordability if you want to customize a solution to the fact that they don't fully cover all handlebar length types. Would replace with this brand again in the future if I have to change them out unless longer grips from the same company are available.

These grips work, fit and look great on my Husqvarna WXE350 with 7/8" Renthal bars. They are comfortable and have exceptional grip when wet out dry. For me there was no negative (except that they were not free!)

These are probably my second or third set of grips for my KLR 650. They (previous Scott grips) last a few years (I ride in all weather... rain, shine, hail, sheet, snow, hot, cold, mild, comfortable, etc.). I just installed them in the last week or two, so I haven't felt these ones through thin gloves yet.

Works as well as a grip should. Took forever to arrive or I would have rated higher. Probably wouldn't buy again to be honest with you.

I own a 2008 cbr600rr, and on my left handlebar, the thread in my handlebar to hold the bar end in is completely gone. I bought these hoping to cover the empty, ugly hole that looks unprofessional on the end of the handlebar, since I couldn't put my bar end back on. They work superb, if you dont have hairspray, use spray deodorant to get them on and you'll be good to go! These grips completely eliminate my sense of insecurity for my handlebar, they dont make the throttle stick, and feel sturdy as hell. Trust me when I say it, these are it.

Easy to install and not too expensive. Took about 10 minutes to get on my son's Honda 250. Rode about 2 hours and he said they were pretty good.

Excellent for off-road bike. Too much comfort padding may hurt off-road capabilities

I previously installed a set of these on my ATV (different part number, both sides are 7/8") and liked them so much I've gotten this set on my dirtbike. I find them very grippy and comfortable, time will tell how durable they are but for the price you can't go wrong!

I really liked the quality of these grips. Now I will see how long they last but it appears that it will be a long time.

Son paro acelerador de puño no de dedo

Want replacement grips?...these will do you well.They fit my 2020 YZ250X perfect.

Très bon produit!!!!!