6239BP Floor Kit with Recessed Duplex 15A TR Device and Adjustable Steel Box

Really like this recessed receptacle. Built like a tank, works great, installs well, looks really good.

When we moved into our new apartment we had this terrible, ugly, cheap floor box with tabs that you had to flip up to get access to the outlets. That means you have the tabs, the plugs and the cable NOT flush to the floor, easy to trip over and impossible to move furniture over. This takes a little more effort to install. I paid for a professional electrician to put it in. What is above the floor now is no higher than the height of the power strip as it lays on the floor. It is tucked away under our bookshelf, unseen, and providing power to my whole entertainment center. When we give our apartment back to the landlord, the clean and beautiful look of this brass, flush floor, recessed outlet box, there will be nothing for them to object to. Can you even find it in the picture?

Highly recommend this floor receptacle outlet! Had this installed with the USB C ports and being able to keep 2 cords constantly plugged in as well as an additional power plug for a table lamp with everything below the floor surface is the best design! The adjustable depth within the floor surface is also particularly important for installation variables.

The hatch on this outlet is ridiculously hard to open. There's too much tension in the clasp. You cannot use your fingers and will need a flat head screw driver to provide leverage, and when you do this you'll begin to scratch at the soft metal of the outlet. Apart from this the outlet is solid, looks good and is affordable. Installation is difficult but it's understandably a complex device.

Excellent, very nice. Do cut on the outside of the template though, box screws extend about an 1/8"

Nice look and well made

It looks good, and it’s definitely built like a tank. Cool. It’s also extraordinarily hard to open- you need some sort of pry bar or screwdriver to pop it. My unit installed nicely however the outlet itself was DOA. I replaced it with a Lutron unit from the hardware store and now it all works just fine. Especially given the price, I would not buy this fixture system again. It’s fine, and I’m sure it will work for forever now that it’s installed. It just took two trips to the hardware store and a replacement part to name it happen.

Prior to installing I discovered the lid was extremely hard to open pushing up from the underside with both thumbs. I did not want scratch it so I did NOT try pry it open from the top. After reclosing it I was unable to push it open again, and I'm quite strong, I popped it open again from the underside using a wooden dowel that I banged downward to the floor..Then I siad to self - "go ahead file those damn pins". After several test trials I got the easy opening I wanted. The product is quite superior to a lot of the junk that is out here on the market. Tip: Scan the template on the back side of the instructions so you can easily cut out the template without destroying the instructions on the front page.

Muy rápido el servicio y el producto es tal cual lonque esperaba.

The quality of the outlet is obvious as soon as you pick up the box; it is heavy and the top cover is a very solid brass. It would be nice if the included template was made of cardboard (vs being part of the paper instruction sheet), but not that big of a deal. Relatively easy to install if you are comfortable cutting a hole in your floor. Easy to adjust the height of the outlet in the floor to make sure it presses up tightly against the outlet. If using a jigsaw, I find it best to cut a small golf-ball sized hole in a larger piece of cardboard to protect the finished floor from marring by the bottom of your jigsaw, although it could just be my jigsaw that likes to scratch up things. One note that I think others have also mentioned: it takes a great deal of force/leverage to open the cover. Maybe this gets more loose with time, but as we just installed them it takes a screwdriver to open the flap. This makes it really great for keeping things plugged in, like a lamp, but not so great if you want to flop down on the couch and reach down to plug in your phone (unless you keep the flap open, which kind of defeats the sleek and unobtrusive point of having this outlet.

I bought 4 of these to install in a 3 season sun-room. The first one was very difficult, the box is very deep so getting the wires in and hooked up was hard, plus they are too deep for the plastic vapour barrier. I learned from the first one so for the second one, I allowed enough wire to hook everything up out side the hole in the floor. I also took the plastic vapour barrier box and made it 2 inches longer using tuck tape and this worked great. Make sure to use the exact size the template gives you as there is no room for error. By the time I got to the forth one, it was easy. These look great and are very functional. the top protects the plugs if not being used and hides the cords for those in use. Really glad I bought them.

No cumplió con la calidad que se buscaba, compramos 32 piezas y lamentablemente las tuvimos que devolver.

I used this to add an outlet for sewing machines in the middle of a sewing room. I used the included template to mark and cut the carpet, then cut the plywood subfloor with my jigsaw. The box fit on the first try and installation went smoothly. I used PVC conduit to run the new circuit and the included electrical box has a knockout on the bottom so it was easy to terminate the conduit to the box with a threaded fitting and locknut. I didn't use the included 5-15 Decora style receptacle as I wired 12 gauge for a 20 amp circuit and breaker. I bought an equivalent style 5-20 receptacle for a few dollars and everything fit just fine. I really like the lid with the rubber flaps. It helps keep debris from falling into the well even when a plug is in use. This is so much better than having an extension cord across the floor!