Paste the Wall 5 Roll Sachet Wallpaper Adhesive Ref 1584707

This is the best wallpaper paste I’ve ever used. It doesn’t look like much but it doesn’t take much and it holds very well!

Excellent product! I am handy, but this was my first paste-the-wall project. All went very well!I only mixed half the package, as that's all I needed.I used a paint brush.

My mutual turned out great! I only did one accent wall in a 11x12 room. My friend mixed the entire package. It was enough to do the remainder of three walls. Hint if you want to make sure adhesive has taken I waited 3 days and and spots where my friend used less paste we had to touch up that area ( product kept well for 1 week tied in a plastic bag in a cool environment]. It works.

Nothing to dislikeIt did take longer to get here than I thought it would

I love that it's not pre-mixed so you can use as little or as much as you want at a time and save the rest. It has a really long working time- It seems to only harden when it touches paper, so if you mix it in a plastic tray it will stay liquid for a long time.

Decorated my living room and bought paste the wall wallpaper. This is so much easier than paste the paper adhesive. Easily mixed and paste the wall directly then hang wallpaper so much less mess.

Came within 24 hours. Very easy to mix and can use within 5 mins. Package says it hangs up to 5 double rolls, but we were easily able to hang 6 double rolls with enough left to hang another. Recommended!

Got to say this is a far better way of papering your walls than paste the paper. I have always used the paste the paper way and always had slight imperfections, i.e bubbles, tears etc. With paste the wall I got professional results in half the time. First may I suggest you get the proper equipment, I highly recommend a Brayer/ink roller. I got the 150mm wide Essdee Brayer from Amazon, not only does it make your job easier it gives the professional joins that look invisible. The brayer is in place of the plastic scraper you would use to smooth the bubbles out.The brayer is far superior at doing this and is ideal if you are putting up textured of 3D paper, you don't end up damaging the pattern. I strongly recommend using a roller instead of a pasting brush, not only will it put the glue on evenly, but you will not miss spots. Roll the glue on horizontally first then go over vertically; do just over one paper width at a time. Use a Plumb line to hang the first piece straight, don't rely on the corner of your wall.If you are getting bubbles then you are not pasting the wall properly or your first piece is not straight. Once you have a piece up and pattern matched use the brayer to roll out excess paste and flatten the joins to a professional standard.I did get 5 rolls (20 square metres) of paper from one packet which I mixed with 5.5L of cold water. The biggest advantage of paste the wall is you do not need a pasting table which can get quite messy. I just used a roller and tray (get a small 5" paint brush to get into corners), I didn't need dust sheets or newspaper. The 3D wallpaper was a little heavy, but the glue kept it up easily, I had plenty of time to manipulate the paper into position to get the pattern match perfect. If you think about it, putting up dry wallpaper is much easier than trying to manipulate a 3m strip that is wet.Recommended, A Brayer, Clean roller and tray, Plumb line, Good wallpaper scissors, stanley knife, wallpaper brush.

I used Solvite many years ago whilst living in the UK, It's a great product over there as well as being the most well known. Solvite was way cheaper than other similar products here in Canada, delivery was extremely fast and came way before the estimated date for delivery.