How to start the engine (1) Insert the emergency flameout insert into the flameout switch slot (2) Insert the oil-import plug which is on the fuel oil pipe into the fuel tank socket (3) Insert the oil-export plug into the tubing socket of the base of the outboard motor (4) Contrarotate the ventilation screws on the tank cover (5) Push the hand pump several times,till it is full of fuel oil and the hand pump gets hard (6) Move the shift lever to the "Neutral" position (7) Turn the throttle handle to the "Start" position,that is the start mark on the handle is aligned with with the arm mark (8) When the engine is cooled off, pull out the choke lever to increase the concentration of combustible gas mixture concentration, make the engine easier to start (9) Pull the start handle,when the claw of the starter is joggled with the flywheel disk, pull out the start rope quickly to start the engine (10) After the engine starts,let the engine run slowly 2 to 3 minutes to preheat the engine,then push the choke lever to the initial position (11) After the engine starts,please check whether the cooling water outflows stably or not,if there is no water or the water outflows intermittently,please close the engine and check it (12) When sailing,please hung the extinction rope on the wrist or belt to ensure safe sailing RECOMMENDED ENGINE OIL:4-stroke outboard motor oil DEMENSION(L*W*H) :365x220x920mm G.W./N.W.:13/9.8Kg Max. OUTPUT:2.6KW/4.0HP DISPLACENENT:49CM3 COAMING HEIGHT:42cm COAMING HEIGHT:44X36mm Max. speed:5000-6000RPM(R/M) Idle SPEED:2750-2850 GEAR RATIO:27:13 TRIM AND TILT SYSTEM :Manual tilt STARTING SYSTEM:Recoil and hand operated
Trustpilot
Hace 1 mes
Hace 4 días
