VEVOR Ratchet Pipe Threader Kit with 6 Dies, 1/4" NPT to 1-1/4" NPT Ratcheting Pipe Threading Tool, Portable Pipe Threader Set with Storage Case for Plumbing Installation and Repair

Good pipe threader for the price. Was using it to install some RMC conduit and it did a great job. My only complaint is that the die pushes out of the handle somewhat too easily, but it's not a showstopper. The teeth did not seem to wear at all after a dozen uses, so the material is of decent quality. It is very, very important to use LOTS of oil. Put some in an oil can and squirt it every half a turn or so. Otherwise, the cutting action will not be smooth and you will get galling, poor results, and the tool will become dull quickly. This is true of an expensive threader, too.

It works great, I need to use different sizes and it was easy and affective. Good quality

I know it isn't Klein or craftsman or snap on but this works perfectly when you need to rethread your pipes

It’s durable, I was skeptical to try it because of the price but it’s works great. It’s easy to put together. All of the parts were included. Definitely would recommend.

I needed to run a new gas line for a garage heater, which involved threading multiple sections of 1/2" and 3/4" black iron pipe, and decided to put this kit to the test. Right out of the case, the tool feels substantial. The dies snapped into the ratcheting head with a positive lock, and the reversing mechanism is simple and solid. I clamped a 3-foot section of pipe in my vise and got to work. Using a generous amount of dark cutting oil, the ratcheting action was smooth and provided excellent leverage, allowing me to apply steady, even pressure. It bit into the pipe immediately and started cutting clean, continuous spirals of metal. I backed it off a half-turn after every full rotation to clear the chips, as is standard practice. The process was demanding, as manual threading should be, but the tool handled the torque without any flexing or chatter. The most critical finding was the quality of the threads themselves. The high-speed steel dies are impressively sharp and well-machined. They produced clean, perfectly tapered NPT threads that were free of burrs or tears. I test-fit a black iron fitting onto each one, and they threaded on smoothly and tightened up perfectly after 3-4 turns, exactly what you want for a secure, leak-proof seal.

Very good quality well worth the money,fast shipping and delivery

Not so good, first pipe a tried to thread some of the teeth broke on the 3/4" die.

Worked as expected, already saved me time and effort.

It does the job for cheap It’s not that expensive a rigid set and the dies sit in the handle differently Had to file the 1/2” die inner diameter a bit to fit standard black pipe had paint build up in die Does the job Made 4 pipe sections so far Do not forget to use oil while cutting threads Too Much is just enough