UltraGlass Unbreak Top 9H+ Glass for iPhone 16 Pro Screen Protector 6.3" (12FT Military Grade Shatterproof) Screen Protector 16 Pro Tempered Glass (Longest Durable) Full Coverage 16Pro, 2 Pack

These seem to be the best available screen protectors for iPhones, especially considering the reasonable price. I tried the Spigen Alumina Core screen protector and it was more difficult to install, had bubbles I could not get out and shattered within 3 days. The UltraGlass by comparison, usually ends up needing to be replaced because dirt will eventually get under the edges, not because the screen protector cracked. I will say that there has been variable quality in the UltraGlass protectors; the earlier ones I literally could not crack when I tried smashing it between a hammer and concrete, later ones would crack but usually after extended use and several drops. If you want easy installation, great durability, reasonable price, and a screen protector that feels like bare glass; UltraGlass is probably your best choice.

I rarely write reviews but this company and product deserve this. I have tried a few privacy screens in the past but this one definitely is the best. The privacy feature definitely meets and exceeds my expectations. The application was smooth and easy. That being said, I did have some issues with the first screen I put on. Within a couple days of putting it on, the protector cracked. I had not had a screen protector break so easily. I put on the second one so my screen would be protected and emailed the company. Their customer service team responded quickly and sent out a replacement. It was so easy and they were very understanding. The second screen has worked great and hasn’t had any issues, so I think the first was just a spoof. If you are wondering if this screen protector is quality, I’m here to tell you it is great and you won’t regret buying products from this company. They will take care of you and they are good on their word.

I just applied my first UltraGlass Screen protector, and the application system works great! I will be back in a few weeks to give report on durability. But so far, so good. 1. Remove old protector, applicable. 2. Thoroughly, clean the phone screen with a lint free cloth or paper towel dipped in rubbing alcohol or denatured alcohol. (I prefer denatured alcohol. KEEP AWAY FROM SOURCES OF IGNITION!) 3. Look across the screen to check for lint and use one on the provided lint free polishing clothes as needed. 4. Apply the UltraGlass screen protector using the included template frame. 5. Allow the screen protector to adhere to the phone screen. Help it on the edges by applying light pressure with your finger, movingly from the adhered portion of the screen protector towards the edge, watching the air gap disappear in front of your finger as you slide towards the edge. 6. Polish your new screen protector and enjoy your phone, knowing your phones screen is protected from cracks and scratches! Less than 5 minutes, if you need to remove old screen protector. Two minutes if you are placing the screen protector on a new phone. I am glad I spent a little extra money of the UltraGlass Screen Protectors. The package comes with a frame for application, so the Screen Protector is perfect aligned. You pull the tab to expose the adhesive to the phone screen, then just have a little patience, and watch the screw adhere itself you your phone screen. About 30 seconds. I needed to give it a little help to reach the top edge. Be sure to apply light pressure to the protector to where it is already adhered to the phone screen and, gently, help the adhesive finish bonding to the screen. Work, slowly from the bond part of the screen towards where you see an air gap. You should see the air gap disappear in FRONT of your finger as you gently, and slowly glide your finger towards the edge. Applying light pressure on the edge of the screen and sliding your finger towards the bonded portion of the screen could result in an air bubble, so DON’ DO THAT! It should go without saying that I, of course, thoroughly clean the phone screen with denatured alcohol, sometimes referred to as, “FUEL.” So don’t smoke while cleaning! Rubbing alcohol will also work, but rubbing alcohol is more than 1/2 water, as opposed to denatured alcohol, so it takes rubbing alcohol long to dry. But, if that is all you have, go for it. Just be sure your screen is dry and lint free prior to applying the protective screen. Cleaning and assuring no lint is on the phone screen is the most important step so don’t skimp here. Actually adhering the protective screen to the phone screen is the easiest part thanks to the UltraGlass template. It took me far longer to write this review than it did to, flawlessly apply the screen protector to my phone. Flawlessly applying the screen, including cleaning took less than two minutes. This was a new phone, so I did not have to remove an old screen, first. However, that should not take long and denatured alcohol will remove any stray adhesive from the previous screen protector. Great product, great system for application! Perfect fit, great value for the money!

Good and easy to put on has everything you need to apply

Bought this for my teen daughter's phone. She said the other kids in her school are super nosey and she's tired of them looking at what she's doing. She asked for a privacy screen protector. I looked at multiple options here on Amazon and checked the reviews. This option certainly wasn't the cheapest (it was actually either the most expensive or darn near close) but it seemed like the best. It appeared to meet all of my requirements: thicker glass, smaller field of vision, and proper fit without impacting the front camera. I was very pleased with how sturdy this glass felt and the install gadget made installation very simple. My daughter has had it on her phone for about a week now and she's very pleased so far. She hasn't reported any concerns so far. To me, that's worth it's weight in gold. I would highly recommend this privacy protector.

This could not be easier to put on and with perfect results every time! No air bubbles, no missed specs of dust that prevent a smooth application. Put one on my phone and one on my husbands phone in like 2 minutes flat and they look perfect! It’s also been a few months since I put them on and I can safely say I’ve never had a screen protector last this long. Love it!!

المنتج ماهو الترا جلاس وسيء جدا

Me encantó que es súper fácil de instalar. Protege bastante bien la pantalla y se adecua muy bien al teléfono. Compre 2 y con ninguno dejó burbujas.

Disaster

Cant believe how well this worked. I took someone elses advice and installed the protector after a shower. Reason being, the steam in the bathroom will cause the dust to drop to the floor, thereby reducing the number of particles that could adhere to your screen during install. After that, it was all easy. Usual screen wipe, check very carefully no dust is on the phone. turn it upside down whilst you're messing around with the phone holder installer. Put phone in (screen side up). Run the red tabs down the phone screen. Push down on the top and bottom and then gently lift up. It's so damn easy and you cant tell there's a protector on it. Buy one!

Very good product and good value for money