ELITEWILLUniversal Lawn Garden Tractor Tow Hitch Receiver Support Brace Kit Rear Attachment

1)Tough piece of metal, most certainly will save your mower from damage.2)It's great, and easy enough to install for a universal. I had to drill a couple holes in my mower frame, but that only took a couple minutes with a drill and titanium bit.3) The height works best with regular utility trailers, it's a bit of an odd (but still workable/useable) angle for smaller yard carts.4) I especially like the convince and ease of use with the design . being able to have my ball hitch attached and seamlessly switch and hook up a different implement with a hitch pin is by far my favorite feature.To anyone who is curious the photos show the hitch attached to my craftsman lt1000 mower.

Very sturdy. There are 2 options for the upper attachment, you will use only one or the other. One is L shaped, the other is triangle shaped. If you use the triangle shaped piece, it requires another bolt, which is not included. Parts can be bought at any hardware store for around $1. Included directions are terrible, but after looking at review pictures on amazon, it is pretty strait forward. I used a 3/8” drill bit and it worked perfectly. I would buy again. Very solid. Looks like original equipment

I love the fact I can add a hitch ball to my garden tractor to move my boat around, but you will need to drill all the holes, get a set of titanium step bits. also they gave four 3/8th bolts and for no good reason added a half inch bolt that fits nothing, no instructions but pretty straight forward to install. now installed and pulling my boat around. great product!

Bought 2022 John Deere X380, I like how it raised ball in the air as i fought old tractor ball, as was to low. Have dragged snowmobile trailer and boat around yard and has worked perfect for me. No bent plates from weight. Perfect thanks!

I received mine in the mail today and it seems very well made and designed. Haven’t installed it yet cause it came with 5 bolts and needs 6. One of the bolts is larger than the other 5 because it goes in the middle of the base piece through the factory hitch hole your mower already has. But there’s 2 other outside holes for the main base and 2 holes in the brace piece, which would require 4 bolts total. Then there is a hole in the piece to connect the bracket to the base but I did not receive the 5th smaller bolt for that hole. Not a big deal cause I can get it at Lowe’s for $2 but would have been nice to have everything. Still worth 5 stars.

Short money, so can't expect too much. Even with the extensions, doesn't fit my 2020 TS348HD. Going to have to do some modifications. TBD.....

Excellent choice for a ball hitch trailer AND small yard trailers. Most yard trailers tip down when attached to the native trailer mount. This assembly raises that attachment point and the trailer now runs level.NOTE: There are 2 angle brackets for securing the assembly at the drawbar height. The double hole bracket is a good choice when the tractor mounting surface is flat. When the back surface of the tractor is contoured for additional strength then the slim single hole bracket is used to fit between embossed vertical ridges. Simple if you think about it. Just the right amount of hardware is provided for one or the other, but not both. Confusion resolved.

I put this on my cub cadet lawn tractor. The metal on the back of the tractor where the ball or pin goes was starting to bend on my heavier attachments. I put this on and it really firmed up the metal and it was as solid as I was hoping it would be. Also raised the ball placement up 4" which made my attachments go to a better angle to pull them.I used the 1 hole bracket so I didn't need another nut and bolt. The one hole bracket was good and sturdy. The two hole one would have had me move a harness and I didn't want to mess with that.I had to drill 3 the same size holes but it was easy to do and this isn't a valid reason not to buy this kit.