MIXC Drip Irrigation System,Quick Connector Garden Watering System Automatic Sprinkler System Kit for Lawn Raised Bed Greenhouse Plant Watering System (16FT Main Tube+ 79FT 1/4'' Tube)

It works just as I had hoped. The quick connect worked amazingly well and took me no time to install. Top notch quality of components. However, I am trying to get more blue mist nozzles to improve my system. No leaks, water flow perfect. Highly approve. Should have ordered a larger or bigger size system but it will do.

Easy to put together. Works fantastically so far.Make sure to measure your yard first to get the right kit. I had to get a longer main tube and the one at the store was a slightly different size and made things difficult.

Quick connects, tubing, and sprinklers (emitters) all work great. The 1/2 inch tubing connectors have failed (popped apart) three times now. While the concept is good the nut that compresses the 1/2" tube on the barb bottoms out before it is tight enough. As a result we have had the 1/2" tube pop out and damaged/killed several hundred dollars worth of plants while we were gone for a few days. Yes, the tubing was installed correctly. We are on a private well and usually have only 55-65 psi so pressure was not the issue. Either the barb is too small or the tubing is too thin or the barb and nut need more taper or something else needs to be done to correct this defect. I am going to use the splitters as provided but try stainless hose clamps rather than the nuts. The only problem with that is the risk of breaking the plastic barb if you tighten too much. I will try to update later.

The media could not be loaded. I've looked at drip irrigation kits for years and always been put off by potential pitfalls. This year I finally bit the bullet and purchased this kit. I liked the idea of the quick connect fittings and the variety of emitters I could get to play with.Having run the entire half inch mainline, and attached four of the quarter inch split off connectors, I'm absolutely thrilled. I have no leaks, the quick connect quarter inch fittings hold on really well, but are a breeze to separate if you need to make adjustments.The best way to describe how the quick connect works is that there's a collar that moves in and out of the fitting that holds the quarter inch tube. If you hold that collar down the tubing releases very easily, but if you do not hold the collar down and you pull on the tubing the collar will hold the tubing in place.The 1/2-in tubing does not use quick connect fittings, but I had absolutely no issues attaching it to the barbed fitting with screw on cap.I have additional of these quick connect fittings in my cart now, and more of my favorite kind of emitter. I look forward to expanding this system throughout my entire garden.All in all, extremely happy that I took the plunge, the product is excellent, and I'm going to enjoy it even more as we get into summer and I don't have to stand outside and water with the hose anymore!

Very good system and easy connections. I’ve had everything from Gardena in the past and in general love the German quality but thought I’d give this a try. It’s hard to beat. This system is very very good! Only complaint is there are not enough connections to go from 1/2” to 1/4” the ones the at branch into 4 lines are great but limit the setup options. I purchased a bunch of others just now from another seller

The media could not be loaded. This is my second purchased of this product! And I assure you that it is all worth it. At first it's kind of hard to set up the timer but once you figure it out it's easy peasy. I enjoyed watching my garden and potted plants get watered everyday. The quality of this product is top notch and easy to put together. I might need to order more once I expanded my garden. Works the way it should be.

Got this to replace the barb connector version. Which worked but the fittings were not molded right and did not work properly. Decided to try this one. The quick connect is far better and those parts are not leaking. However, this model uses the same plastic compression fittings for the 1/2in main hose. At first they were fine but after a week they all started leaking. They could not be tightened anymore. I tried on one of them and I stripped the plastic threads. ended up having to buy hose clamps for each one of them. Cost me almost twenty bucks in additional stainless steel clamps but now it is leak free. Plastic compression fittings over a barb for the 1/2in hose is a bad design. This system will work if you buy it but anticipate having to reengineer some aspects of it.

The media could not be loaded. I bought this along with a timer to water my pots when I was on vacation. It was easy to set up and worked flawlessly. The one thing you have to know is that you cannot take the sprinkler heads off once you put them on. So be sure you put them where you want them. I also wish I had bought a set with more of the thin hose line that goes to the sprinkler heads. I’m going to get some more next year.