PCCOOLERCPS C3T500 AIRFLOW Mid-Tower ATX/M-ATX/ITX Case, Pre-installed 6 120mm PWM ARGB Fans,Column-Free Design,270° Full View Tempered Glass,360MM Radiator&400MM GPU Support,Easy Installation,WH

The media could not be loaded. Wanted to downsize case from a Corsair 680x to This C3T500 case for more desk space. Came well packaged, no damage and was very happy with footprint and aesthetics of the case.Case comes with some pre installed fans which I must say are not great in terms of A, air flow and B, orientation of some fans. The side fans are set to exhaust, but ideally should be intakes. The 3 fans on the bottom are reverse intake fans and the rear is set to exhaust. But I knew I was never keeping them so not a huge issue but please be mindful of this when purchasing,Comes with a handy fan hub controller secured to the bottom of the case. Cables were a bit messy but easily tidied.If you have a large heavy gpu that requires some kind of sag support bracket, it installs fine, but at the rear, there is a PCIE cover. The cover will not close if the sag bracket is used.You have a bay at the rear for additional drives, this can be removed for storage of excess cables, or hub controllers etc. space is limited in the back being such a compact case so spend extra time in cable management.If your using a full size ATX board, the header for my usb 3.0 fouled on the fans, I had to purchase a right hand angled usb 3.0 extension cable to connect up.Some small issues but overall, this case is designed fairly well, let down but a few issues but nothing that is a deal breaker. Case looks beautiful and one happy customer

The media could not be loaded. This is Gotta be the best PC tower case I have ever owned and constructed. However, some of the wiring isn’t very clear to the RGB Hub. You can work it out if you take it very slowly work out what wiring loom goes where and also with the help of YouTube videos, that’s how I did it and you can see in the video it’s as quiet as a mouse I also used a £61 water cooler can’t remember the make but is absolutely fantastic as well, dead simple to fit .

The media could not be loaded. Its alright. Hard drive space seems to assume you have NVME as it only really has space for a HDD and one SSD (SATA) However I managed to Rig it for two SATA and one HDD alongside my NVME without sacrificing space.Lots of space in the back to tuck cables, even with extenders, and plenty of fixings for cable management.If you use a Full ATX board there's no space on the bottom to pull thru cables, but you can rout them around the side from the side ports and the fans hide most cabling.Be prepared to remove the fans to access the bottom of the board.Great airflow and overall design is lovely once assembled. Seems solid build and looks sharp. Value case.

The media could not be loaded. Nice case but can be a bit fiddly with the fan cables, I would disconnect the pcb that comes with it and just plug the fans straight into your motherboard using the connector that’s pre plugged into pcb, not very long cable but it worked .Keeps my gps below 40 degrees on extreme graphics war zone

The media could not be loaded. For this price bracket the case is alright. Would be much better suited to lower end PC builds. If you’re fitting an ATX board as I have it can get a little cramped with trying to wire things up properly. Cable management is ok, but wouldn’t expect much more for this price range. I love the separate compartment for the power supply and hard drives. Air flow is alright considering the space. However the fans that come supplied are absolutely terrible in regards to performance , they max out at 850rpm and their performance is very minimal. They are incredible quiet, but they would be for not a great design with low speeds. They are also all installed to draw air into the computer with no exhaust configuration, so you’ll have to rotate some before assembling. If you are using higher end cards/cpus I would strongly suggest changing these out completely before building the computer. I have had this case for a little over a month and one of the fans has stopped working already. You get what you pay for!

All the cables are jumbled together and the glass case was scratches on one side the fan was also stuck on one colour not the easiest to work with at all be alright if was half the price perhaps

This case delivers everything it was advertised. Stable , good finish, heavy enough not to vibrate. Silent coolers.

Case looks lovely and is big enough for my setup including a rather large water-cooler radiator.