LCD Touch Screen Digitizer Glass on Navigation LCD 7 Inch 4 Pin Fit Hyundai Sonata Veloster 2013-2016 Kia Sorento Soul 2013-2016 Replaced OE# LMS700KF30 TM070, LB070WV7 (TD)(01)

Worked great my screen was damaged and had no touch screen installed this and it's back like new

Perfect fit for 2013 Hyundai Veloster. Original screen had been melted at an over enthusiastic car wash, radio now like new. Took a car radio shop around 30 minutes to install.

The digitizer's ribbon cable is not in the same place as original and also very long, after I put the head unit back together the touchscreen was still not working. I disassembled the unit again and found that the digitizer's ribbon cable was crimped, mangled and basically broken. I cannot repair the ribbon cable, so, I wasted 20 bucks and a lot of time. I can not recommend this for a veloster.

This screen revived my Hyundai Veloster’s navigation display. Touch responsiveness is excellent and the image is crisp.

Bought this in hopes to get my radio head working for $20 and not spend $$$ on something so simple.Item bought worked as it should.Top to bottom is exact size.Left to right is off by a centimeter or 2 but fits regardless if you can line it properly.The 4 pin wire to the radio itself is more to the left and rather long, but if it wasn't for it being longer it wouldn't work. Had to fold, twist, and angle it under and through the hole to fit like original. Just be careful because there is a screw hole right where it folds. It's not a necessary screw so you can leave it off, but I got it with just enough clearance to not damage the yellow cover.TLDR: ITEM WORKS, MEASUREMENTS SLIGHTLY OFF BUT NOT NOTICEABLE. CORD IS MORE TO THE LEFT SO YOULL NEED MANEUVER IT. DECIDE FOR YOURSELVES WHETHER TO PUT SMALL BLACK SCREW BACK IN OR NOT BUT ITS NOT NECESSARY.(in caps to stand out in review)4 out of 5 because of the risk of damage to the 4pin cable.

Left is new vs old on the right. Bought as a replacement for a stock 2013 Veloster with no GPS. Works Great if slightly off center and came with pre placed glue strips for easy installation. Replacement was easier than expected, just go slow and remember how everything was before you take it apart. Hardest part was getting the trim/AC panel out.P.S. there are a few good YouTube videos showing disassembly to get to the screen both for the trim and head unit itself.

The media could not be loaded. Easy to install, if you have a veloster it will work !Happy to get my OM radio features back.

Me tomo 15mn instalarlo,debes hacerlo con cuidado y con toda la paciencia para que salga ok!!!