GE SunSmart 7-Day in-Wall Digital Timer Switch, Auto Sunrise/Sunset, Weekly Programmable, Security, Countdown, Single-Pole/3-Way, Neutral Wire Required, White or Light Almond, 32787

This review is for GE SunSmart Digital in-Wall Timer 32787. Easy to install. Make sure your electrical box has a neutral wire before ordering. Installed this to control our front porch light. The light has a photocell in it but is in an area that gets little sunlight especially on cloudy days, so it sometimes stays on all day. This switch solved that problem. We live in the Pacific Northwest so have very long dusk and dawn. Dusk and dawn don't really describe when the light should be turned on and off. It should be sunrise and sunset which would better describe when the light should cycle. Set ours to turn on 5 minutes before sunset and turn off 5 minutes after sunrise. Just Google to find when sunset and sunrise times are in your area. FYI, dusk and dawn times are not the same as sunset and sunrise times. Not sure why all the complaints about programming. I had no issues at all programming the switch following the instructions provided. To avoid frustration, make sure to read and understand the instruction before installing, setting up and programming the switch. The instructions are actually very well written. I found it was easy too setup and program. There is one major error in the instructions which could be confusing. Right above "A. Programming the ON/OFF days" it states "Setting the dawn/dusk region (zone):". This line should not be there and describes the previous step. Main thing is, don't confuse the "PRG" button with the "SET" button. The "SET" button is only used for initial setup of Time, Year, Month, Day, DST (on/off), Zone, Dusk (time), Dawn (time) and to select and set to memory settings in the programing steps. For programming there are 7 "PRG" that can be used. I only used "PRG 1" since all I want is to turn the light on and off at sunset and sunrise and nothing more. Press "PRG" until the PRG number you want to use is displayed and then press "SET". Now select the days using the arrow keys. There are 6 preprogrammed to use or also individual days. I used the one that displayed "MO, TU, WE, TH, FR, SA, SU", and pressed "SET" too select it. Then using the arrow key to scroll to "DUSK" for the on time and press "Set" which than goes to the off time. Then using the arrow key scroll to "DAWN" and pressed "SET". That's it, programming completed. It may be a good idea to make sure PRG 2-7 are empty of all settings if you do the same type of setup as I did. Found it was easy to program the switch on the workbench before actually installing it in the electrical box. The back light does not turn on if not installed but the LCD screen is still easy to read. Also, the instruction sheet that comes with the switch requires a microscope to read. Googled the part number and found the online PDF instruction sheet. It too has pretty small print. Used my computer and zoomed in on the pages needed, took screen shots and printed them so they could be read clearly during setup and programming.

For my application, my box already had the white neutral wire inside the box so the installation is really easy. Take out your old switch, plug in the provided white extension wire to your new plug and put the two black wires that were on the old switch onto the new programmable switch. Seriously that is all you need to do in the wiring department. Programming is really easy set the time and various other things and its done. Set the on off time for me it was only one program on at dusk off at dawn. For my application, this was perfect. When setting the sunrise sunset times, I adjusted mine 27 minutes before the actual sunrise and 27 minutes after the actual sunset; I looked it up on a sunrise-sunset.org to see what the true dusk time was and for my area its about 27+ and - minutes and set my sunrise sunset to first light and last light actual time. This gives me true dusk to dawn timer. If you notice in the description, it says you can move the sunrise sunset times by 2 hours and this gave me exactly what I wanted. This also gives the appearance of someone turning on the lights as they don't come on when it starts getting a tiny bit dark and vary day to day; unless your bugler knows what the last light of the day is he'll, never know it was a timer. They come on when its last light and car lights wont turn off my outdoor lights. They also go off before the day starts so they're never on during daylight unless I turned them on. There are no other systems I know of that can set the lights on off at dusk dawn, this is the only one I know that can do it. Not even my computer goes off dusk to dawn just sunrise sunset. This switch also has a glow but it only works when you touch a function and it only stays on a minute or so. It'd be nice if the back light stayed on all the time or a setting to make it stay on all the time. It probably doesn't stay on to keep it from wearing out the light source. Its really nice though you can hit the switch and it turns on the lights and hit it again and it turns them off. There are other timer function but the super simple on off is great. The switch did require some some squeezing to get into my box but it fit.

These work great. They were super easy to install. They look great next to the other rocker switches. They can be programmed in a variety of ways such as dusk to dawn, random, or programmed for specific on and off time (multiple ones in fact). My only complaint is that because it has such a wide variety of programming options they are a bit of a pain to program and since I installed four of them it makes for a lot of button pressing. But over all I am happy especially since it eliminates walking up to the house in the dark.

This was very easy to install and since I can program the time zone, this Dusk to Dawn operation will be perfect year round. I had 5 of them that replaced light switches and I set Program 1 to go ON at Dusk and OFF at Dawn, and they all came on within 20 seconds of each other, sot this was a great setup and much cheaper than attempting to merge all 5 areas onto a photocell to turn them on at the same time. I was glad that the wiring locations were labeled on the timer, so was easier to properly install them. And placing the wires into a whole and tightening them worked well and was much simpler than screwing a turned wire onto the switch and this worked with the ground as well, which is typically required to be screwed onto the switch, so this again simplified things. I also tested the programming by turning off the breaker feeding it and when it came back on, it retained the Date and Time and the Program still existing, so a power outage will not negatively impact these timers. Very happy with them and a reasonable price.

TARDO MUCHÍSIMO EN SER ENTREGADO, UN DILEMA CON LA PAQUETERÍA DE AMAZON, PERO BUEN PRODUCTO

Works good

Does job very well

Funciona de forma óptima, es fácil de programar! Solo les recomiendo que le busquen una tapa para mayor estética!

Replaced my wink hub and this is great Zones for automatic on/off dusk/dawn according to where you live