TTIMORE LCD Screen Adhesive for Apple Watch Series 4/5/SE/6 42mm, 5Pack

Was a little worried based on some reviews but figured it was worth trying for $6. Glad I did because it fit perfect & I had my watch screen reattached in about 10 minutes! Got it on the first try too but happy to have some extras in case it happens again. My screen just popped up, was still attached & working though so I had to cut the end to go around the wires still attached. Was easy! Would recommend! Beats the $150 the Apple Store was gonna charge me!!

DO NOT BUY THIS. Even though it was easy to install, it didn’t work for me. I’ve been trying to find a way to get a newer watch, for a newer watchOS version, since I have the Apple Watch Series 3, which is running watchOS 8.8.1. Then, I realized that my mom’s previous watch, which was the Apple Watch Series 6, was the perfect solution to my problem. But, my mom had previously accidentally broken the screen before, and so she had to get the screen replaced. But, the screen adhesive wasn’t working, so my mom just gave up on it and bought a new one. I wanted to take the watch, try to fix it myself and call it mine, (since I couldn’t afford to buy a new one). Cause I figured, how hard is it to place an adhesive to a screen to fix it?? So, I saw this product when I was searching for adhesives on Amazon, so I decided to give this one a try for $7. Well, that turned out to be a mistake because, first time I installed the adhesive, only one side stuck on pretty well, but the other side kept popping off, (as shown in the pictures above). I was pretty disappointed, but I decided to try again and put double adhesive this time. But, it was the same result. I am very disappointed with this purchase, and will not buy again. However, I will not give up on fixing my soon-to-be watch, and I will try to find a better sticking adhesive .

Only received 4 stickers instead of 5. So not a great start to this experiment. Good tweezers are needed. Attempt 1 was successful but failed after 2 days. Separating the thin ring got deformed a little. Liner was difficult to separate. That could be part of the issue. Attempt 2 was better. Experience helped. Lining the brim went perfectly and separated easier. Seems more secure and better adhesion. Time will tell. Install is a little tricky if you don’t remove the entire screen. Steady hands and patience needed when installing the glue ring on the brim. Very delicate product.

I have a series 3 Apple Watch. The screen randomly popped off one morning. A lot of search results said this is common when your battery swells, but my battery was not swollen, so I think the original adhesive had just worn out over time. I ordered these replacement adhesives thinking it might take me more than one try to get it right, but I was able to get the job done with the first one. It’s been 24 hours and so far everything on my watch is working properly, though I’ll probably try and avoid water more than I have in the past. Application tip, find some good tweezers to help minimize skin contact. Way cheaper than paying Apple $160 to fix.

Seems to hold well, definitely very sticky, and pretty easy to apply. Just make sure to apply pressure on the screen for a few hours after seating the display back down or it may slowly come back up. Putting some cushioning between the watch and a bench vise with slight pressure overnight worked for me.

Fit my watch well but the adhesive kept releasing after a few hours a corner of the screen would start coming up

No instructions included like it mentioned on the product page. So had to follow the directions from ifixit site. Good thing I bought the 6 pack. The sticker are oddly configured so I wasted the first one trying to understand how it worked. The second one I got. I heated and left between a clamped book for 24 hours. It seemed to have worked, but after a day of use the watch face peeled off again. So tried it a second and third time with the same results. These don’t work and aren’t adhesive enough to keep the watch face adhered to the watch. I ended up using the E6000 glue which worked flawlessly.

Wrong size sent. Labeling and packaging were inconsistent with math and real world measurements. There are plenty of options for this product. Roll the dice on another one.

破損している商品でした

Update: Just like other reviews the screen has come away from the body after a few weeks. I did this with the screen still attached so had to work it around the screen ribbon. Attempt 1: Put it on perfectly but wasn't able to separate the blue backing from the adhesive while it was attached to the watch. Attempt 2: Removed blue adhesive first and left the paper backing on, but it's pretty flimsy and was difficult to work around the screen without sticking to everything and I ended up abandoning that one. Attempt 3: Used a pin to separate the blue backing from the adhesive strip and snipped a small section of the blue backing away. Removed the paper backing and attached to the watch. Used the pin to separate the blue backing where I made the cut out and left it overnight with a light clamp applying pressure. Seems to do the job but I'm yet to test the longevity based on other reviews here. There was plenty of cursing in my 3 attempts so if you're not up for that, consider sending the watch off for repair as these were still $32 AUD for a DIY job.

結構金額する割には粘着力微妙で剥がれてくる。 しかも張りづらい。 テープの切れ目と粘着力改善が必要。 結局接着剤使用して止めました。

気になった点は以下の通りです： ・内容物が異なる(写真通りの製品が出荷されるとは思わない方が良い) ・雑に切り取られたシール ・質と値段が釣り合わない ・パッケージや梱包がない（本当にシール5枚だけが届きました） 正直、この商品の品質には驚きを通り越して疑問を感じます。Amazonがこうした粗悪品を取り扱っていることに失望しています。普段レビューを書くことはあまりありませんが、今回はあまりにも悪い買い物だったため、注意喚起のために書いています。 使用感： iFixitを参考にこの製品を使用しましたが、「使えなくはない」というのが正直なところです。詐欺的な印象を受ける商品ですが、最低限の利用価値はあるかもしれません。ただし、おすすめはしません。 防水性能は完全に失われます。 もしApple Watchを修理するために2000円程度しか予算をかけられない方であれば、一応の選択肢にはなるかもしれませんが、それでも別の選択肢を探すことを強く推奨します。

値段が高すぎます それと交換作業がとても大変です