Question 1

Is anyone using this tool for transferring patterns to wood for chip carving? If so how successful are you at printing out the pattern on a desk jet.

Accepted Answer

Yes, the tool is used to transfer patterns to wood. We receive no complaints so I'd say success rateis high. Thank You for your inquiry.

Question 2

Does this tool have tip interchangeability? Can it be used for other functions, such as soldering, wood-burning or adding designs to leather.

Accepted Answer

The answer for ordinary mortals is NO, but for the gods on high Olympus, it is yes. The little round foot is threaded for a #8-32 machine screw. The hole on mine is drilled and tapped to about 1/2 inch. So, you can get a screw at any hardware store that will screw into that hole. It will heat up the same as the round foot that comes with the unit. Now for more $$$ than the unit cost, you can go to a machine shop and have some special shape foot made for your special needs. Soldering depends on the melting point of the solder. Off hand is would not want to solder with the tool as the thin copper coating will probably dissolve in molten solder. I doubt if it gets hot enough for wood-burning. I would think you could transfer designs to leathery transferring a black and white design from a laser copier onto Clearprint No. 1000HP Design Vellum paper. Laser printers may be fussy about the vellum as the toner powders really do not like to stick to it. When you place the vellum design toner powder down onto the leather and rub it firmly with the hot transfer tool, the toner powder will melt. Then it is a contest would the toner prefer to stick to the leather or to the vellum. I will bet that the leather will win and the design will transfer to the leather. Now you have a very intricate design on the leather. If this is on something like a belt, I would think the design would be abraded off. You probably need to provide some abrasion protection for the design., You just have to experiment to see how it works for you in your application. I do very intricate designs on wood this way, but then coat them with Varathane clear gloss polyurethane water based paint.

Question 3

I live outside the US, and our AC is 220. is it dual power or does it work on 220 AC?

Accepted Answer

No.  It only works on 110/120v.  You would need a converter to use this product.

Question 4

i can use the transfer tool for transfer pencil sketches to scratchboard paper?

Accepted Answer

As far as I know, this tool only transfers toner ink to various substrates like fabric, wood, unglazed tiles, stones, etc.

Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

Wall Lenk Transfer Tool, 18-watt

Descripción

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes