WEN Push Block and Push Stick Safety Set for Woodworking, 5-Piece (WA0001)

I have a number of WEN pieces in my shop. I didnt go out of my way to buy WEN, but it just sorta ended up that way. I've been happy with the other tools, and Im happy with this one. It's on the smaller side (works well for my needs), but it's also powerful and cuts straight and clean. It comes mostly assembled, and I didnt need to do any fine adjustments to dial it it...although it has those capabilities. We'll see how it goes down the road when I need to change the blade, but so far, it's doing its job well.

This little charmer seems like it will do the trick. Band-sawing is not high on my woodworking needs, but when needed, you can’t beat it for what it can do. I had a floor model in my one car garage ‘shop’ and it took up too much floor space. I sold it and FINALLY got a bench top model – this one. You can forget about the table angle Rube Goldberg adjustment contraption and use a small square to set 45’s and the occasional odd-ball setting. The main leveling screw for the table is a PITA to set up so take your time the first time and get it right at 90 degrees! All other angles will 'fall into place' from there. The cover lock knobs are not intuitive as they are ‘righty-loosey, lefty-tighty. Don’t ask! Always take your time when first setting up the saw. Make sure the guides and thrust bearings are set correctly to insure decent performance. After that you shouldn’t have too many problems. The wheels are machined aluminum and the lower wheel even has a dust brush that sweeps away saw dust when operating. Nice touch but not sure if it matters as you should always clean it after use anyway. The blade tracks nicely and the controls are easy to get at and adjust. Overall, I like it and I think it will come in handy on more than one occasion. It’s not a work horse but it will fit the bill for my needs.

First, for what it costs, I think this saw is great for a small shop doing small hobby projects. However, due to my own stupidity I sawed into a hardened screw. Let's just say that shortens the blade life to right that second. So, I looked it up, found it uses a 62" blade, went to Home Depot and bought a 3-piece set of 62" blades. You can see how they fit in the picture. So, I measured the new blade, right on at 62 inches. I measured the old blade...59.5 inches. I could deal with that and wouldn't be upset if I hadn't looked the saw up to see what size blade to buy. I'd also be a little less perturbed if HD sold a 59.5" blade here in Puerto Rico...but they don't. Now my project is on hold while I wait for a delivery from Amazon. I have company visiting from the states for the next two weeks... so now, because the description of the saw I have is incorrect, my project is on hold for more than two weeks.On the plus side, the saw seems quite adjustable, so I was able to make a straight cut through the width of a 2x4...up until I hit the screw.

My Wen 9.5 arrived in very short order, in excellent condition. After mounting the worktable on the machine, no other set-up/adjustment was required. Cuts straight. I love the fence, and the miter is handy. It goes right through 1" pine, and I did quite a bit of 1" maple without trouble. I was prompted to make this purchase owing to the gradual demise of my old Black & Decker, a.ka. "Screamin' Mimi," which to say the least, was one loud machine. I was startled by the Wen unit's quite rumble. With my usual two layers of hearing protection, I have to look at the blade and feel the vibration to know it's running! It has a little window in the side so you can see the band while making tracking adjustment. The user guide is clear and understandable, not hastily run through Google Translate into English. I am very satisfied!

The throat isn't wide enough, I thought it was 9 inches not the wheel size My bad

received the saw and set it up finely go a chance to use it and cant get a good square cut on a 3/4 inch or any size piece of wood, the bottom blade guides cannot all be adjusted one side is completely frozen. the Blade guide when adjusting up and down binds the blade when the table is level and square to the blade with the blade guard up when you move it down the blade does not stay square and you can not get a square cut,Called Tech support and a lower guide is being sent to me and we got the blade guide working smoothly as it should. will add to and mabby change the review in a few days.received my part today readjusted saw and it works better but if you are looking for a Stright cutting and precise saw this is not the one you want I will use it for now but will have to replace it for finer and accurate cuts.

This everything I expected and does all the work I need it to do.

Easy to use, good safety switch, one one was below, different location. Cumbersome tilt table adjustment, 2 locking knobs geared tilt table wobbly when locking knobs loose. Should have gotten one with dual speeds, single speed ok, dust port collects some dust, bland adjust feature are nice viewing window on side nice feature

Justo lo que esperaba, corto patas de sillas en madera macisa y hago muchas cosas en triplay de 15mm, trabaja excelente dándole su tiempo. Hay que pasar lentos los cortes y te dará un buen acabado

Tuve una sierra similar de 1” más pequeña marca delta, y está aunque es más grande pesa menos, eso indica que el metal puede ser más delgado y frágil. El armado fue fácil y si, requiere muchos ajustes, pero tienes que ser muy paciente porque uno de los tornillos que aprieta un balero que da fuerza a la sierra, al hacer el ajuste se barrió. Y créeme, se barrió muy fácilmente y solo de la punta, pero eso bastó para que quedara inutilizable porque es extremadamente corto.No es una sierra para trabajo rudo y constante.

Es un buen equipo para casa

Muy eficaz para proyectos domestico, educativos, y profesionales con gran potencia, lo mejor que se encuentra a un precio económico

Muy buena me salió, tiene potencia el motor, los cortes son buenos. Nomás hay que calibrar todo para que los cortes salgan bien