LET'S RESIN UV Resin Kit with Light, Bonding&Curing in Seconds, 30g UV Resin with Flashlight for Welding, Jewelry UV Glue Adhesive for Plastic Repair, Glass Light, Craft Decor

The USB Penlight pumps out enough UV light to harden the included resin, within the specified 5 seconds. I use it to assemble wargaming miniatures. I also bought a UV Nail Hardener, which is nice because it has multiple UV LED's, which bathe a miniature in a flood of UV light. I use the penlight to harden the resin, then I put the figure within the UV Nail Hardener, turning it over every 15 seconds or so, to ensure the resin is fully hardened. Overkill, but it gives me more confidence. I had a large, 65mm, metal miniature which had its hand, holding a weapon, fall off. I applied a sparse amount of resin to the joint, held it in place, then I applied the UV Penlight: it hardened, the hand and weapon are still holding, two weeks later, without issue. I applied gentle pressure to see if it would hold, and it is. This is incredibly useful for miniatures gamers who need on-the-spot repairs, quick and easy. Figures break during game play, quite often, and this will allow quick, easy repairs to be made with minimal interruption of the game! I tried to repair a broken plastic tab with the resin, yesterday. It cured, nicely, but the resin bond with the clear, hard plastic, was extremely weak, and it broke off within minutes. It is not a cure-all for every material, so experimentation will be necessary. Cheers!

I had a Swarovski crystal ornament with two crystals that unattached from the main ornament body. We've tried many, many glass adhesives over the last two years but nothing held and took way too long to dry. We've used UV cured adhesives in the past for repair other non-glass items, so a search led us to this purchase. We wanted to make sure it was good for glass/crystal and would cure clear. It worked perfectly. We first soaked the pieces in acetone to remove all the old adhesive to ensure a good fit and adhesion. A tiny drop and a long burst (just to be sure) of the included UV light and my ornament is good as new. It cured perfectly clear and you can't see the repair at all. The bottle is enough to last for years if it doesn't dry out first. I'm sure I'll find other uses for this adhesive because it works so well. Highly recommend.

Excellent product. It was very easy to use and did a phenomenal repair on my eyeglass frames. I had previously used a popular brand name product for the same repair and a) it was incredibly cumbersome to use and b) it didn't last well.

Ordered this as a larger quantity to another brand of UV resin on the market. It seems to work quite well; bonding in mere seconds once the UV light hits the adhesive. The actual resin appears to be quite sticky and adheres to the materials well. It does flow nicely into the material before you hit it with the UV. However that can be slightly detrimental, as the bond may not be as strong if you can't expose it to the UV light from the other side. One other quirk is that the adhesive, once cured with the UV light, seems to be "wet" still if you run your finger over it. It does not appear to fully harden as the other brand. I thought perhaps I didn't cure it long enough, so I left the UV lamp on it for a considerably longer time then was recommended.....still feels a bit wet. Fast forward a week or so, and the resin still feels wet, though it isn't, and the parts are holding well. This was used on the dashboard of my vehicle, and it definately gets exposed to heat and UV light through the windows, so not sure what the resin propertys are that keep it that stick wet feeling. Still, a good product that I would recommend.

This stuff is cool! I have a Willow Tree angel that fell & broke in a few places. It's crazy expensive to replace her, so I looked up how I could fix her! In a matter of a few seconds she was bonded back together! I also had a metal hat pin that is a collectable. The back weld broke. BAM!! Bonded better than the weld on it. I am in LOVE with this product! Bye, bye super-glue and HELLO resin bond!

Cool gimmick.

This stuff saved my A**!!! On thanksgiving day I soaked my turkey in the sink with some salt. I didn’t realize that the sink would flex ever so slightly and put stress on a weakened drain pipe that connects from the dishwasher to main drain. All hardware stores are closed for the holiday, so how were the dishes going to be cleaned? I thought of using electrical tape but it would probably make a mess. I remembered I bought this stuff for a bowling ball and thought to myself “What do I have to lose”. I placed a decent amount around the leak and turned on the UV light. The resin stopped running and that’s when I knew it cured. Although it was still a little sticky I didn’t care as long as I can patch the drain up till the next day so I can get a replacement.This stuff is a lifesaver!!!

Works well a little messy but strong

Es klebt alles wunderbar miteinander. Nur dort wo das UV-Licht nicht hinkommt, kommt es eben zu keiner Reaktion und der Kleber wird nicht fest, was eine zeitlich nicht limitierte Ausrichtung der zu verbindenden Teile zulässt. Bei einem normalen Sekundenkleber: Kleber drauf, Teil hingehalten, fest - nix mehr auszurichten. Dort wo das UV-Licht jedoch auf den Kleber auftrifft, tritt die Reaktion innerhalb von 5-10 Sekunden ein und es bildet sich eine feste Verbindung der zu verbindenden Teile. Ich hatte Probleme mit einem sehr filigranen Modell mit Klemmbausteinen; dort fielen immer wieder kleine Teile ab, ordinärer Sekundenkleber kam für mich nicht in Frage, da ich mit der Zeit dann sicher selbst Teil des Modells geworden wäre. So aber trug man an den gewünschte Stellen etwas Kleber auf, der eben ohne UV-Bestrahlung so lange nicht aushärtete wie man Zeit benötigte, um alles an Ort und Stelle zu fixieren. Dann 5-10 Sekunden UV-Lampe einschalten und schon war das ganze fest. Nun ist ist Modell fertig und ich bin voll zufrieden mit dem Ergebnis. Man muss jedoch dazu sagen, dass aufgrund der oberflächigen Verklebungen diese nun sichtbar sind, was für mich aber verschmerzbar ist, da der Kleber relativ transparent erstarrt. Wie stark die Klebeflächen belastbar sind, konnte und wollte ich nicht testen, jedoch sind von den von mir mittels diesem Kleber fixierte Teile nicht mehr abgefallen. Ob dieser Kleber einem reinen Sekundenkleber in Sache Klebekraft gleichsteht, muss man selbst prüfen. Zu erwähnen sein auch, dass sich die UV-Lampe sehr hochwertig anfüllt; zudem ist sie über USB aufladbar. Tolle Sache. Das Kleberfläschchen selbst ist mit einem Siegel versehen, dass den Kleber vor dem Auslaufen und Austrocknen schützt. Da der Kleber ohne UV-Bestrahlung nicht aushärtet, Beigelegt ist eine aufschraubbare Dosierspitze, welche eine feinere Öffnung für eine bessere Dosierbarkeit aufweisen könnte. Nach getaner Arbeit lässt man das Fläschchen eine Zeitlang stehen, so dass der Kleber aus der Dosierspitze zurücklaufen kann, dann wird diese Dosierspitze abgeschraubt und der Deckel des Fläschchens wieder aufgeschraubt. Am besten stellt man das Fläschchen an einem dunklen, trockenen Ort. Und ja, man sollte sich auf jeden Fall Einmalhandschuhe anziehen, denn der Kleber hinterlässt, auch wenn er nicht mit UV-Licht bestrahlt wird, eine klebrige Kontaktstelle, die schwer zu entfernen ist.

Très bonne résine uv , colle efficacement

This product is perfect for filling holes in resin left by bubbles. It’s quick , precise and easy to use and this includes the UV torch.

La résine est de bonne qualité, le stylo UV fonctionne très bien.

I was a little sceptical at first when buying this, but thought I would give it a try, and I’m glad that I did. Within 5-10 seconds under the uv light (that’s included) this had stuck metal to wood, but the great thing is, I can lift either the metal or wood and it doesn’t budge or come apart like superglue or other glues would do, this stuff is the new super super glue. I would definitely recommend this and purchase again and again.