Duronic Projector Mount Stand for Ceiling or Wall Bracket PB05XB | 13.6kg Capacity | Multi-Fit Projector Bracket | Heavy Duty Adjustable Clamp | Tilt Swivel Rotate | White

I used for mounting an optoma uhd300x to the ceiling. this item was far better than I anticipated,especially at this bargain price. I expected to have the fiddly task of assembling a box of parts, how wrong could I be, there are 2 main ready assembled parts. the part you fit to the ceiling is preassembled, I screwed it into a joist. the part for fitting to the projector is complete, you just loosen and swing the 4 arms out, I removed one, only needed three. and then extended two with parts provided. I used the adjustable feet mounts for fitting the cradle rather than the 3 bracket mounting points, they are further apart and I thought it would be more stable. I set the cradle to the projector to give a good balance, then simply hooked the projector up to the ceiling mount. setting the pj to the screen was so easy. one tip I have is to fully undo the 2 tifghtening screws at the hook connection before offering the pj upto it, just makes it a bit easier. I fully recommend this product, compared to the bracket I've been using for 12 years, which cost 3 times as much, is more flimsy. less adjustable and never held its position for long, the duronics is brilliant. it even looks good, with a nice finish. like I say, I used the adjustable feet to mount the bracket to the pj, so you don't even need to get any extra screws/ bolts etc also I don't normally take the time to review a product, so that says something about how impressed I am by this bracket.

Brilliant and no hassle

This is a great deal at the price. I did consider spending 10x on the one the same brand as my projector but when I saw the Duronic name I knew this was something I could trust. I used my own fixings on the ceiling as the ones supplied were overkill to be honest. I had to use the supplied extensions as the arms weren't quite long enough to fit my Epson TW7100. The plastic spacers were a bit fiddly but when I looked closely at the pictorial instructions I worked that out. Not the prettiest however I don't often stare up at the ceiling.

This is a great low-profile bracket if you want to keep the projector lens close to the ceiling. Loads of adjustability available in this design including tilting, rotation, swinging and even offsetting the projector lens for centre line adjustment using bolted arms (30-40mm is the maximum offset). The only downside is you cannot really lock the projector in a certain position. Plugging/unplugging from HDMI/USB ports or even pressing the buttons may cause the screen calibration to get messed up.

This is a good, solid piece of kit that has all the bits you need (although I opted to use my own wood screws to secure it into joists as the provided screws seem more suitable for use with the supplied wall plugs). I chose it specifically because my (Epson) projector has a seemingly unconventional 3 mounting points and the flexibility of this mount was able to deal with that fine. Although relatively easy to set up, still expect to spend 30 minutes, but I expect that to be the same for all models. So far it's keeping its position ok. The only minor improvement would be a more solid way to secure the back/forward tilt, as it is done by tightening the hanging bolts rather than like the more secure methods for other dimensions, but this seems to be holding ok. Happy with this.

Good quality, very secure

Superb quality, great price. I bought my projector as Richer Sounds, great store, but they offered me quite expensive Peerless mount, and they don't really have cheaper choices to offer. So, I decided to buy one on Amazon instead, and it's fantastic! It doesn't look as sleek as Peerless, but it still looks nice and serves its purpose very well. The difference in price payed for my 15m 4K HDMI cable, so I'm happy.

Excellent projector mount, very sturdy, easy to set up and easy to adjust.

El soporte Duronic PB05XB ha sido una gran compra para mi proyector. Es compatible con casi todos los modelos gracias a su diseño universal, y la articulación permite ajustar el ángulo perfectamente para obtener la mejor proyección. La instalación fue sencilla, con instrucciones claras y todos los accesorios incluidos. Una vez montado, el soporte es muy estable y seguro, sin movimientos ni vibraciones, lo que garantiza una imagen nítida y constante.

しっかりした造り、これだけフレキシビリティー高い構造ならどんなプロジェクターにも対応できると思う。エプソンTW750はほとんどアタッチメントも使わずきれいに取付できました。

Produit nickel

Durable and easy configurable and adjustable Using this for over two years now and very happy

Works well, nice heavy duty construction.