FL Hang on Holding and Breeding box, L

Honestly the best ever breeding box i have ever purchased space savings hangs on the outside once connected to air supply fills itself. No instructions needed self explanatory up and running in 5 minutes Recommend purchase will be buying another

Mounted this on a 120L community tank to isolate fry and a stressed guppy—worked spot-on. It hangs externally, so it doesn’t take up space inside the tank. Water circulates from the main tank using an air pump (not included), keeping temperature and chemistry consistent. No heater needed, no separate filtration—just plug in and go. Setup took about 10 minutes. Suction cups and brackets hold firm, even when full. Flow’s gentle—no risk of fry getting tossed around. I’ve used it for guppy fry, shrimp, and even a short quarantine stint. Easy to observe, feed, and clean. 📦 Features & Specs Capacity: 1.1 litres Mounting: Hang-on design with secure brackets Flow System: Air-lift driven—uses tank water for circulation Compartments: Optional dividers for multiple fry or isolation zones Material: Clear acrylic—easy viewing, solid build Extras: Includes tubing and flow adjuster (air pump not included) 🧪 Performance Water Quality: Stays stable—no separate heater or filter needed Noise Level: Near silent—just a soft bubbling from the air pump Cleaning: Easy to rinse and wipe down—no awkward corners Visibility: Clear sides make it easy to monitor fry or isolated fish 👍 Pros ✅ External mount—saves tank space ✅ Gentle flow—safe for fry and shrimp ✅ Stable conditions—uses tank water ✅ Easy setup—no tools needed ✅ Optional dividers—customise layout 👎 Cons ❌ Air pump not included—must buy separately ❌ Limited size—best for small fish or fry ❌ Needs level tank edge—check fit before mounting ❌ No lid—watch for jumpers or evaporation 🧭 Personal Verdict If you’re breeding, isolating, or just want a clean way to manage fry without stressing your main tank, this box is a tidy bit of kit. I’ve used it for guppies and shrimp—no drama, no losses. It’s earned its spot in the gear stash.

Excellent piece of kit for the aquatic breeder.

it works well. I've used it several times now with platys. Thin layer of dark gravel, a bit of guppy grass / java moss, and a pregnant female can go into the breeder with as much as a couple of weeks to go and stay there without getting stressed. It's big enough that fry can get away into hiding. I found that even with the weir / grid thing at the outflow, quite a lot of fry got washed into the main tank, which didn't actually cause a problem given it was a shrimp tank, but obviously would depending on the tank's inhabitants. I guess a piece of foam might keep the fry from washing over if that was a concern. The downside is the airlift, which is noisy / gulpy and not the most efficient. I keep meaning to find a small water pump to move the water rather than the airlift, but haven't got round to it. There's a bunch of youtube vids with hacks some of them to quieten the llow. That said, it does work, it's quick and easy to set up, equally to take down and clean. I wouldn't consider anything but the large one.

Returned but product was very good. Didn't realise it sat on the outside of tank plus your tank glass needs to be more than 5mm thick which mine is not.

Excellent, worked well but you need a separate air pump to work, as it circulates water into the small tank sitting outside of the main tank and then back into the main tank.

Attached a tiny water pump running on 3 volts to the end of the air-bubbler tube, so pumping water directly from the tank into it. This is virtually silent, as opposed to air pumps which can be quite noisy. Has been working well for a few months as our baby Platys get big enough to put back in the main tank. Ironically, since I set this up, our tank inhabitants have developed a taste for Platy fry, so I hardly ever see them before theyre eaten! Incidentally, Im not sure Id want to put a pregnant adult the size of a Platy in this for too long - its quite small if you include the separator plastics.

Super easy to assemble and get started up. Very sturdy, instructions were clear and all in all a great purchase. A lot deeper than I expected too! The air flow alone may be a bit gentle for some so you can add a small filter to allow for more flow but all in all, great purchase! I did add a sponge instead of the provided little grates for added security when fry are beginning to be self sufficient.

I have tried different types of breeding boxes and I consider Fluval holding and breeding box the best among them. It has everything that you need for an aquarium hobbyist. The size is very convenient comparing to others while I wish if Fluval can make a bigger size also. This is a complete set and you won't regret buying it. I highly recommend it.

İçinden hortum ile bağlantı plastik çubuğu çıkmadı iade edildi.

This has made my guppy breeding experience so much easier. It was very hard to remove fry from the traditional mesh breeding boxes. Plus the material itself would grow algae, get a dirty oil film on top and was difficult to clean. It also was difficult to remain attached with cheap suction cups. This external breeding box is amazing! Can see more clearly, feed them with ease, i can clean mess from bottom of box with a turkey baster, without disrupting the fry and it just tops itself up. It is easy to net the babies out once they are old enough for the community tank. And so easy to feed multiple times a day for younger fry - as you only have to turn off the air pump, rather than all the filtration too. This has been one of my best fish keeping investments!

gutes Aufzuchtbecken, haben hier schon einige Fische groß gezogen

werkt gewoon goed en heel goed om eieren uit te broeden