PLEASE NOTE: ASSEMBLY REQUIRED. Lightweight and strong. Enjoy being able to move the field of view left, right, up and down. MG90s servos are recommended in this application due to having metal gears. The MG90s is a tight fit when assembling the base of the platform but will go together with some pressure. Servo horns will need trimming to size with strong cutters, dremel or knife to fit the platform. Tips on assembly and installation available here: http://www.safaridrives.co.uk/content/manuals/pt-assembly.doc Multi screw pack included to fit a wide range of installations. Mounting of camera will depend on your model of camera. Small FPV case cameras will clip right into the holder. MG90 servo specifications: Dimensions: 23 x 23 x 12mm (33 x 33 x 12mm including fixing tabs and arm hub) Weight (including connector): 13.2g Operating Speed (4.8V no load) : 0.12sec / 60 degrees Stall Torque (4.8V): 10.2oz / in ( >2 kg/cm ) Temperature Range: -30 to +60C Dead Band Width: 4 usec Operation Voltage: 3.5 - 8.4 Volts
A**R
DONT WASTE YOUR MONEY
OK so mine arrived today, had to give it 1 star as not allowed to leave it blank but this is a ZERO STAR PRODUCTthe servo arms are too big width wise to fit into the base mounting slot, so a lot of careful filing is needed, by time you have got them to the right size to fit, they are of no use strength wise, the top part of the kit is molded to small so when you mount the top servo it bends everything out, any weight from a camera will just make this item fail even more, no real fixing for the base servo, meaning the camera could very easily fall of while in flight, and no instructions supplied, the only half decent thing with this item are the servos, but as you can buy tower pro mg90s servos at £1.66 each you basically paying £16.67 for something your gonna throw in the binmy advice to anyone looking at this item is DON'T BUY, you will only regret it
M**S
Mostly good
Very good apart from an issue with the servos. These particular servos are well known to have a sloppy gearbox. This means that if you push hard on the shaft the gearbox goes out of alignment and the servo slips without doing anything. However, you have to push on the shaft to assemble the mechanism. You can get around the problem by pushing the servos into place, and attaching them as required, then gently easing the body of the servo away from the cogwheel. This the realigns the gearbox, and all is well. Don't forget to set the servos to mid-range before assembly.
J**K
dont buy
instructions are non existentthe fittings do not fitservos are extremly loose"assembly required" no god dam guess work , a file and a hot glue gun requirednot worth £23 or what ever it was priced atnot happy at all with it and dont have time to look else where when i have a collage protect this was bought for to finish
M**R
pan and tilt servos
useful for a camera mount for the raspberry pi. There are many articles on the net to allow colour or face recognition for raspberry pi. The pan and tilt servos are essential for this application.I am still working on it myself.Recommended.
R**N
Five Stars
works well
M**N
like, but would benefit from having assembly instructions/url included
like it, but no instructions or URL on how to assemble it. had to figure it out myself from internet images.
A**R
Rubbish
Servo's fittings do not fir to the plastic brackets. Rubbish.
W**K
Avoid, badly fitting parts.
Poorly fitting tilt mechanism.Also, the bundled servos are a bad fit for the mount, not enough clearance.
R**I
NON SI MONTA, NON HAI RISOLTO IL PROBLEMA!!! SEI UN FORNITORE NON AFFIDABILE STATE LONTANI
ALTRA RECENSIONE CHE SI RIPETE PURTROPPO: Se presi singolarmente vanno tutti bene, peccato che i servomotori in metallo risultano essere leggermente più grandi di quelli in plastica e tanto basta per non poterli montare sul supporto in dotazione. Se non fossero stati venduti come un unico pacchetto, l'errore sarebbe stato mio nella scelta, ma visto che sono un bundle l'errore è del commerciante che fornisce un insieme che non può essere montato. Ora dovrò comprare un altro set di servo motori, da un altro fornitore, ovviamente...
A**X
Servos passen nicht zur Halterung
Als handwerklich versierter Mensch habe ich mir die nicht vormontierte Version bestellt und bin davon ausgegangen, daß die Servos und Halterung eine Einheit wären.Leider passen die mitgelieferten Servos (MG90S) überhaupt nicht in die Halterung. Die Bauform ist größer und die Befestigungslaschen sind zu dick. Zudem passt keiner der Mitnehmerarme der Servos in die vorgesehen Vertiefungen der Halterung. Da würde auch kein stundenlanges Basteln, Feilen und Kleben helfen.Artikel ist somit unbrauchbar und wurde von mir zurückgeschickt.Weniger als 1 Stern kann man leider nicht vergeben.
F**.
Pezzi non compatibili
Se presi singolarmente vanno tutti bene, peccato che i servomotori in metallo risultano essere leggermente più grandi di quelli in plastica e tanto basta per non poterli montare sul supporto in dotazione. Se non fossero stati venduti come un unico pacchetto, l'errore sarebbe stato mio nella scelta, ma visto che sono un bundle l'errore è del commerciante che fornisce un insieme che non può essere montato. Ora dovrò comprare un altro set di servo motori, da un altro fornitore, ovviamente...
E**H
one star is too much!
bad quality of plastic parts ' it can break on thin placesno assembling instruction, no information about control of servos.It is too expensive for what you get.Don't waste your time & money - don't buy it!one star is too muchsehr schlechte Qualität von den Plastik teilen.keine Zusammenbauanleitung, keine Information über Steuerung der Servos.Für Bastler Kit ist einfach zu teuer. Viele Details muss man selbst nach-googlet werden.Ich habe geschafft es zu Laufen zu bringen, aber zu viel Zeit investiert!Leider kann man nicht weniger als 1 Stern geben'' ''''''''' ''' '... ''' '''''''''' '' '''''' ''' ''''''' '''' - ''' '''''''' '''''' ''''''! ''''''' ''''' ''''''' '''''''' ' ''''' ''''' '''''''''''''''''' ''''' ''''''' '''''''''''' '''''''.'''' ''' '''''' '''''' '''''''' - ''''''''' ''''' ' ''''' '''''''''''' '' '' ''' ''''''''' '''' '''''''' !
K**R
Piattaforma di Supporto per Telecamera PT Pan/Tilt per FPV + 2x servocomando MG90
Piattaforma di Supporto per Telecamera PT Pan/Tiltprodotto ben confezionato e arrivato nel tempo previsto.Facile da montare. Materiale plastico per piccole telecamere.Due motori per movimenti nelle due direzioni Azimuth e Zenith.
T**K
Hervorragend!!!
Der Artikel war wie beschrieben und kam wurde sehr schnell geliefert. Das Material ist Kunststoff, jedoch wirkt es nicht billig und sehr stabil! Zudem war eine große Packung Schrauben für fast jeden Montage- und Kameratyp dabei. Die Servos sind recht hochwertig und reagieren sehr schnell. Sehr gerne wieder!!!
L**A
Montage très sommaire....
Les servos ne s'adaptent pas correctement au pièces de la plateforme de montage, obligé de COUPER des pièces des servos pour qu'elles puissent rentrées dans emplacements attitrés...Dommage, cela m'aurait été beaucoup utile pour mes vols en FPV
X**N
Presque parfait
J'ai eu l'impression de ne pas avoir les servo prévu parfaitement pour le kit. Quelques décalage dans le montage. Hormis cela, l'utilisant avec un Raspberry tout fonctionne sans soucis.
A**K
Nicht passgenau mit den Servos MG90s
Musste die Servos und die Kunststoffteile in denen das MG90s eingeklemmt wird nacharbeiten.Außerdem musste ich Abstandhalter bei dem oberen Servo einbauen.Die Bohrung vom Gelenk war auch zu klein und musste auf 5 mm aufgebohrt werden.Die Halterung ist wohl für die SG90 Servos entwickelt worden, aber die MG90s haben nicht 100% ig die selben Abmessungen.Habe es nach viel Bastelei dann doch hin bekomen das ganze zusammen zu bauen.
Trustpilot
Hace 1 mes
Hace 1 día
