ALTO Stealth 1 Mono UHF XLR Wireless Audio System, Transmitter and Receiver for Powered Speakers, Mixers and Dynamic Microphones

I needed this for two specific applications: wedding ceremonies and satellite speaker situations. In both settings, I don't use extension cords and either can't or don't want to run XLR cable. The Stealth 1 Mono system is ideal for this: It sets up fast It's easy to use It works. I've spent a lot of time with the Stealth 1 Mono wireless system. I've tried it in many situations. When you follow the instructions EXACTLY, it works perfectly: Set the speakers where you want them. Turn the transmitter on first and THEN the receiver. IF you turn the receiver on first, the whole thing becomes intermittent. I've tested the battery life twice with rechargeable batteries. They lasted 4.5 and 5 hours before the wireless turned off. That's more than enough time for wedding ceremonies, cocktail hours and short gigs. I've also ran it 80' apart without any issues. I haven't needed it to go further than that, but Alto says it will go 100'. I've also used it with the output on a mixer to the speaker and it worked flawlessly. UPDATE: I had the same static issue as HGDJ below. But it only happened when I was using this with a Bluetooth input on the speaker to send music to it on a test. As soon as I plugged the music directly into the speaker input via a cable and sent the signal out to the other speaker via the Stealth 1, the static went away and it worked perfectly. Maybe you can't use Bluetooth AND the Alto Stealth 1 at the same time? The Alto Stealth 1 Mono solves my problem perfectly. Would I use this with the band in a critical "this can NOT fail" kind of situation? I don't think so. If I wanted a wireless speaker system for the bands FOH system, I'd go with the Alto Stealth Wireless Pro.

This was a product I could not wait to receive. Alto is an awesome company. This was a product I could not wait to receive. This has great potential. It's UHF. It's battery powered. It's got a small form factor. The distance seemed pretty decent. The only issue was my unit had a lot of static or hiss. I'm not sure if it's defective since I've seen other reviews where it works great. I'm so sad I had to return it because I really wanted this to work. UPDATE: I purchased this a 2nd time. I hooked the transmitter into a mixer. It's drastically better. No buzz. No hum. Maybe a slight hiss. But, almost unnoticeable. Very pleased with the volume. Seems to produce plenty of output. Hooking it the way I have now, made a world of difference.

I bought 2 pairs, they do exactly what they are supposed to do. I am a musician. I plug them from my mixer to the speakers, 2 sets 2 different channels. I like that you can use them while they are plugged in to a power source, so there is no worries about running out of battery. If you are like me and using then without batteries, considering buying 2 very shot xlr cables for the ones going into the mixer, because the power connectors will be too close to each other when plugged into the mixer. You will also need an adaptor cable for the power. They came out cheaper than using batteries. The links are listed below. https://m.media-amazon.com/images/I/61-nkiHYAsL._SL1500_.jpg https://m.media-amazon.com/images/I/61QtJhjnC2L._AC_SL1500_.jpg

A genuine piece of garbage. I bought two and they both failed on first use. One has literally constant static noise. Doesn’t matter what I do, it is always present which makes it useless…. The second one had no noise, it seemed to work great for a couple hours. Went to unplug and it literally snapped in half. Disconnected all wires and plastic broke. I pulled it with normal force, like I would with any other XLR cable. If it hadn’t happened in my room, it would’ve absolutely happened at an event. So upset. $200 wasted. Will be returning one but assuming the broken one is money down the drain. I really expected better…

Alto stealth is a great product the only issue is that I couldn't find the frequency of each channel. So I had to buy a signal scanner. ill save you some time with the list below frequency per channel 0 - 542.125 1 - 543.625 2 - 545.050 3 - 546.425 4 - 546.900 5 - 548.150 6 - 551.100 7 - 552.475 8 - 554.000 9 - 556.075 A - 558.975 b - 559.975 C - 561.050 d - 562.975 E - 564.425 F - 565.975

Works fairly well for line level. But for mics, it introduces so much hiss that it is unusable. That could be because it has no way of switching between line level and mic level. Or because without a cable, there ceases to be a real ground (IDK how dedicated wireless mics get around this). Either way, its pretty terrible.

funciona bien en ocaciones en larga distancia de 20 metros y en otras ocasiones no llega ni a los 5 metros.

Son muy buenos no hacen transferencia con otro artefacto para nada

La qualità del suono è ottima. Nessun ritardo. Lo si può usare con tutti i microfoni. La batteria dura poco , è consigliabile portarsi un set di batterie durante una serata, ma solo per il trasmettitore. In quanto il ricevitore lo si può collegare ad un alimentatore qualsiasi con cavo usb. Tutto sommato è una ottima alternativa ai cavi audio che spesso limitano il raggio d'azione.

Brilliant quality and range. This Nissan a really good bit of kit.

va bien y tiene 9 opciones

the quality isn't great and unless it's direct line of site, drop out are high

Gut