Hosa CMP-310 3.5 mm TS to 1/4 Inch TS Mono Interconnect Cable, 10 Feet

I used this to wire up a mandolin to my PA. The mandolin had an old Barcus Berry pickup that accepts a 3.5mm (1/8 inch?) mono plug. This cable plugs into the Barcus Berry at one end and into my instrument amp (standard 1/4" or "guitar cord" jack) on the other end. The cable feels solid and substantial while still having adequate flexibility for on-stage use. The plugs click and hold securely in the equipment jacks.The connectors are molded onto the cable and include adequate strain relief so the cable won't get kinked. I think this will work for extended use. The next step up for me (because I'm handy) would be to manufacture my own, with all-metal plugs on the ends, soldering the plugs on by myself and making sure to use enough heat-shrink tubing to avoid kinks and relieve strain. But given the reasonable price of this cable, if it's critical that it not fail during a gig, I'd advise you just buy an extra as a spare!

I tried a stereo 1/4" TRS to 1/8" TRS Cable first. I purchased it before this cable for a different application at home. It's not a cheap cable, but there was some 60 cycle him and a slight phase-shift between left and right channel. (Late model 32 channel PreSonus sound board.) That's when I ordered this cable, to see if it could get rid of the hum. This cable cured the hum problem to an inaudible level with a high-level source (barely no clipping) and also with the source paused. The Church application is multiple sources into the PreSonus sound board for typical mixing, then a collective, post-faders output into a distribution amplifier (DA), with one of the DA 1/4" outputs sent to a digital audio mp3 recorder (DAR), where a single out goes to left-channel in the DAR. Like I said previously, this cable doesn't add any audible hum to the DAR recording, so it's perfect for our use. Both vocal and music sound great, with no audible coloring or alteration to the sound from the DA. Highly recommended for any similar use!

Sounds great. Still works.

I needed to convert my synths to eurorack format (into Pico inputs) and these worked perfectly. So awesome to be able to manipulate the sounds of them in my modular! Great cables and a super useful length, good sound quality. Super happy and highly recommend them!

I have had my cables for about 3 months, and so far so good. They are the answers to a very difficult problem when trying to connect a cell phone or mono equipment to a mixer or mix board. I will have to put a little more "wear and tear" on these before I can rate them a 5

works good no problem low cost good brand

This is a great cable for connecting a radio, computer, old Casio keyboard to an amp. It has a tight connection and it’s just perfect for getting a full bodied sound out of something that you might be struggling to push through a guitar amp. Overall it has an excellent tone and I will be buying more in the future as needed.

It works just fine, except after about 18 months there was a short in the cable. I use it to connect my MP3 player to a Direct Box to play my Accompaniment tracks, it just started to short last week. I guess I will have to order another one, ugh! Big sigh! I guess for the price, its not too bad. I use this piece of equipment at least twice a week, which is about 100+ times a year. Purchased this is March of 2011, started going bad September of 2012.

Perfect solution. Gets the job done well.

オーディオテクニカのワイヤレスマイクで声を拾い、ワイヤレスレシーバーATW-R103とSONY CFD-S51等のアンプ付きのCDラジカセにつなぐ際に使用。このような使用をする人は少ないと思いますが、アウトプットとインプットのサイズが異なる時に役立ちます。このオーディオケーブルが手元にあると、いざというときに何でも対応できそうで安心できます。

Does the job, decent quality

Hosa HosaTech CMP-310 - Cavo di collegamento mono con connettore jack da 3,5 mm su jack da 6,35 mm, 3 mHosaTech CMP-310 - Comperati due pezzi a 32€ arrivati ieri. Oggi il prezzo e sceso quasi del 50% Mi aspetterei che mi fosse rimborsato il DiPiù , altrimenti procedo al reso e li riacquisto. Purtroppo così due viaggi inutili a scapito della natura. Mauro P.

I'm using this to connect a Behringer Crave to the rest of my setup. It works perfectly