Car Key Fob Keyless Entry Remote Start fits Ford, Lincoln, Mercury, Mazda (CWTWB1U793 4-btn) - Guaranteed to Program

I purchased these keys after getting a price quote from Ford for 2 new keys, cutting, and programming, which was going to be around $500 total. After researching, I decided to do this myself.I purchased a used 2012 Ford 150 pickup truck. I only got 1 Admin key when I purchased this and needed to get spare keys for everyday use.The new keys will only open the doors (manually) and start your vehicle after completing Part 1 and Part 2. The Key FOB (buttons) works after Part 3.From my experience, the order of these steps is important and should be followed for each key.Part 1 = Cut the keysPart 2 = Program the securityPart 3 = Program the FOBYou get 2 blank key+fobs with this order. They appear to match perfectly the originals (w/o Ford Logo on back)Part 1 - Cut the keysYou will need to get the keys cut. I ended up getting mine cut at Ace Hardware for free.Part 2 - Program the security in the key- If you only have 1 admin key, you will need to use an OBD-II scanner and FORScan software. There are videos on YouTube on the exact process which takes about 30 minutes total per new key. The software is free and a decent scanner can be found for around $35 USD.- If you have 2 admin keys, you can follow instructions using YouTube videos to program the security chip in the new key.Once the new cut key has the security programmed, it should now open the doors (manually) and start the truck without setting off an alarm.Part 3 - Program the FOB (buttons) of new keyThe FOB now has to be programmed. Insert the working admin key into the ignition and switch the truck on then back off (again without starting the vehicle) quickly 8 times - on the 8th time leave the ignition ON. You will here the door locks operate - then, within 10 seconds, push the lock button on the key fob in the key in the ignition, you will hear the door locks operate, then press the lock button on the new key FOB you are programming, you will hear the door locks operate and it should now work.Repeat for the 2nd key.You should now have these 2 new keys working properly to unlock door manually or remotely, crank the truck with no security alarm warning, and if the remote start option is installed in your truck, you can press the lock button, then the 2x button three times slowly and the engine should crank.Note: If you are using FORScan to program the keys, you can also use it to enable the Remote Start feature/function. I did this not knowing if it was actually installed with hopes it was and was pleasantly surprised after programming my new keys to find that it does in fact have the remote start feature installed and works perfectly with these keys.

These keys work as advertised. I had only a transponder key 🗝️ without key fob remote. I bought these keyfob keys with full knowledge that I would have to have a locksmith or dealer since I didn't have at least one programmed keyfob key.1. I went to Lowe's (their key machine is computerized and only cuts their keys)... they don't sell my key. I usually get replacement keys there.2. I went to Home Depot and the young lady cut my keys free of charge. I'll be getting my replacement keys at Home Depot now.3. Lowe's gave me the business card of a locksmith with exceptionally reasonable rates ($85 to program up to 4 keyfob keys at the same time).Note: The keys must be cut before programming. The ignition switch must be turned off and on.I get tired of people writing fictitious reviews because they failed to read or damaged the product themselves and won't own up to it. That causes others, and sometimes even me, to miss out on quality products at a reasonable price/cost.There's nothing wrong with the keyfob keys if you follow the directions. PERFECT SOLUTION AT THE RIGHT PRICE! Ford Dealership vs Me: I saved more than $1,000 buying these keys, getting them cut, and having a locksmith program the keys.Bonus-Unrelated update:Driver's Door Keypad Code YouTube free vs Ford Dealership $350 software reprogramming fee1. Fuse panel inside Driver's Left Foot kick panel2. Black component with white sticker3. 5-digit number is factory keypad "door unlock code"4. The Ford Dealership probably will not give you the information. They gave me an estimate and a two hours appointment instead. Grateful for YouTube contributors.I was able to delete the "My Key" program, thanks to the purchase of these keyfob keys. The previous owner had programmed the transponder key with restrictions on radio volume, no seatbelt/no radio, and a maximum speed limit of 65mph. The speed limit in my area are 55 65 70 with average motorist speeds 65 75 80+. I was afraid for my safety each time I had to get on the expressway on-ramps.

worked perfect instead of going to the dealer for 200.00 each . went to the lock smith and got 2 for 120.00

The key looks nice the button seem a little less firm than the original had a difficult time finding a locksmith to cut the key was able to find one to cut and program the key to my vehicle but unable to program them to start and unlock lock the vehicle. I did find a video on YouTube showing how to program the remote start and the key fob it worked. It took me a couple of times but I got it I had to use the method twice one key didn't work so I was able to do it again and press both keys at the same time instead of just the one at a time and it worked it program both keys other than that and not having a Ford emblem on the keys I would recommend them to anyone to save several hundred dollars

We had to have locksmith program which we expected but still way cheaper than desler. Only took a couple minutes to program.

These keys were recommended by my locksmith. They worked great with my 07 Ford Edge at a fraction of the dealer cost.