ESR for MagSafe Sticker 360, MagSafe Ring, 2 Pack Magnetic Ring, Universal Magnetic Wireless Charger Conversion Kit for iPhone 17/16/16e/15/14/13/12/11, Samsung Galaxy, Google Pixel 10, White

I’ve been using the ESR MagSafe Sticker 360 Ring Magnets for a few weeks now, and they’ve made a noticeable difference in my phone setup. I, personally, chose to try these out for my phone due to the VERY THICK case I use (something to do with a "box" of "otters") preventing the phones built-in MagSafe from being usable. Pros: • Strong Magnetic Hold: The magnet is surprisingly powerful and holds my phone securely on all MagSafe accessories—even in the car. • Wide Compatibility: Works perfectly on cases or devices without native MagSafe support. • 360° Alignment: The ring design helps with precise alignment, so accessories stay centered. • Easy to Install: Clear instructions and alignment guide included made setup simple and quick. • 2-Pack Value: Great to have a backup or one for another device or case. Cons: • Adhesive is VERY Strong: Once placed, it’s not easy to reposition. MAKE SURE you get it right the first time. (Half Pro, Half Con?) • Slight Bulk: Adds a bit of thickness to your case, but nothing too noticeable. • Finish Can Show Wear: After a few weeks, the finish on the ring shows light scratches. Overall, this is a fantastic solution if you want to bring MagSafe functionality to a non-MagSafe device. ESR did a great job with quality and usability. Definitely recommend!

Works great, and looks best on solid color cases, or cases with a repetitive pattern on them, such as checkerboard, multiple flowers, stars, etc. If on a case that has a cartoon character(s) on it, or wording, it may not look great, as it may cover the design. THE MAGNET IS STRONG! Easy to apply, just read the instructions. You’re suppose to wipe the area with a alcohol wipe (provided), then dry it with a dry cloth (also provided), and then use the guide to measure where it goes on your iPhone or Samsung phone. Once the guide is in the right place, plop down the magnet, press on for a few seconds, then let it set for a minute or 2. Press it down again, and then you should be good to go!! I will definitely be buying more of these, if I buy a case that isn’t MagSafe!

I'm using this in ways it says not to, so grain of salt here, but it works perfectly for me. - I'm using it on a Pixel 9, not an iPhone or the listed Samsungs. Since there are no templates included for the Pixel 9, I had to play around with placement for a while before I was comfortable that it would work for charging. I eventually found that one of the Samsung templates did actually place it very close to where I needed it, but that was only because the alignment adapter didn't fit all the way into the charging port as intended. See the photo for what I mean. But as long as you "practice" placement first to find the best spot, it can work on other phones not listed. (I recommend placing the ring on your magnetic charger magnet to magnet and then moving the phone around on top to find the best spot... then press the phone down to stick it.) - It adhered very well but I'm using it on a vinyl skin, not a case. So there's less interference but it could also be less durable since it's only as strong as the skin is. It's held up for the few days I've had it installed but if anything changes, I'll update, though I wouldn't fault the ring for that since I'm not using it as instructed. - The magnet is very strong. I use a magnetic wallet and it attaches much, much better than the Magsafe MOUS case I had on previously. That was strong enough not to lose the wallet but I could remove it quite easily myself. With this, the wallet isn't going anywhere and it takes quite a lot of force to remove it for charging. - It's super thin and light but holds well. I got white and it looks nice, even though it's obvious. I don't anticipate needing the second one unless something happens to my skin and I need to replace that, but glad to have it as a backup. All around very much recommend. And for what it's worth, I realized I own 2 other ESR products—the 3-in-1 travel charger and an iPad case—and both are great and very high quality. So I'm now on board with this brand at this point. We'll see if that continues. UPDATE 6 MONTHS LATER: DURABILITY: The ring has been working great! And still very white (no staining) and not a scratch on it despite the fact that I slide my wallet on and off and put the phone on and off a standing charger daily. However, I accidentally ruined my vinyl skin—dyes from a new pair of jeans I didn't wash enough first mreh—so since this pack comes with two rings and I had an extra lying around, I decided to just replace my skin/ring. This gave me a chance to try and destroy the old ring while it was still attached, just to see how it held up...... yeah, that sucker ain't coming off naturally heh. And it took a of scrapes but was still magnetized (and charging) just fine. I eventually just removed the vinyl skin with the ring still attached so I could move on. It holds up! TEMPLATE: So the SAMSUNG A template does indeed work for the Pixel 9. Last time, I'd discovered afterwards that this particular template was very close to where I'd eventually installed the ring after a bunch of testing. This time, I just went straight to using the template. So, I installed my new vinyl skin, plugged in the template attachment as far as it would go, put the Samsung template on rung A, and stuck down the ring. All is well. Worked like a charm!

This MagSafe sticker is a simple and useful accessory for ensuring proper alignment with MagSafe chargers and accessories. The magnet helps devices snap into place securely, improving charging consistency. It’s easy to apply and fits most phone cases without adding bulk. The only minor consideration is that the magnet may slightly reduce compatibility with very thick or metal cases. Overall, a practical and effective MagSafe accessory for anyone looking to improve wireless charging performance. Solid four-star functionality.

Easy to install. I have a Samsung fold 7 with a zagg magsafe case. But the magnet is so weak and finicky, I couldn't even use my powerbank, so I opted to order the ESR magsafe sticker ring. Best decision I made. I removed (pried is more like it) the magnet from the zagg case, aligned the sticker using the guide provided, cleaned and dried the area and Poof! Now the powerbank charges, magnet is super strong! Very happy, this small purchase (15 for a 4 pack roughly $4 for one) saved my &100 powerbank purchase and the $50 I spent on the initial zagg case. Highly recommend this product!

Product came with an installation kit, with a plastic piece on the bottom and a cheatsheet with different levels of height (covering multiple models of iPhones and Galaxys). Very impressive, it made the installation a complete breeze. The magnet is very sturdy and the adhesive is robust - and there is 2! The colour (green) matches my OnePlus 12 beautifully, in my opinion. Even the packaging is nice. Totally recommend, it is a great product.

Works with all types of magsafe accessories and is easy to install. I am using it with popsocket and magsafe power bank.

The product delivered to me was different from what’s posted. Looks like a cheap brandless metal ring. Does not have the additional magnet to help keep magsafe wallet in place. Still have to test if it will work properly with mag safe chargers.

This ring is perfect for phones like the XS Max to use with a Magsafe compatible charger. I have attached mine to the back of a wooden IATO phone case and it still works for me an a Balance 3 in 1 charging station (see me other review). Easy instructions, comes with supplied templates for Android or iPhones, just plug in dummy plastic charging template to the port and place the relevant template over the pegs for your model to exactly position the ring, peel off and stick - job done. Having some spares for future use on a new case it a great idea and cost effective. Really pleased with the ease of use and no fuss installation. Took less than a few minutes to fix and works perfectly. The magnet is very strong and holds my XS Max solidly onto the charger, very firmly, requiring a significant pull to release it, which gives you a lot of confidence that the phone will not fall off. Personally recommended and I would repurchase in future if needed, but with the spare rings, there shouldn't be a need to.

Excelente