Newentor Atomic Projection Alarm Clock with Weather Station for Bedrooms, Projector Clocks with WWVB Function, Indoor Outdoor Thermometer Wireless, Temperature Humidity Monitor and Weather Forecast

I purchased this clock based solely on how satisfied I am with the Q3 weather station I have. The Q6 clock is accurate, has no problems syncing with WWV. The projection is excellent the way I'm using it to project across the room. It's very easy to read at night and not too bright to keep you awake. I had some problems with the remote sensor not being picked up. I tried a few things but couldn't get it to work. I alerted support and was pleasantly surprised to get an immediate response to try a few things. When that didn't work they immediately sent a new unit without question or cost. Both Newentor products have been great. The only thing that would improve them is for them not to use blue as a color for the display. Blue is very difficult to read from a distance. Other than that these devices work well regardless of temperature.

I've always been interested in a projection alarm clock, since my clock is on the headboard behind my head, and my eyes don't adjust well at night. Also, I work outside and wanted to know the temperature as soon as I wake up so I know how to dress for the day. This baby has it all! Pros: •love the projection! I don't have to turn my head around to see where the clock is. It ends up bigger than the clock also, so easier to read at night. Also, you can angle it however you need to, and even flip the projection over for those of you who install it somewhere other than the headboard. •As mentioned, I also love seeing the current temperature in that projection. It changes every 5 seconds from inside to outside temperature. •I haven't used the alarm function, but read that you can turn the alarm off with any button on the clock. Plus the snooze button is adjustable so you can make it snooze as long as you like, or make it another "turn off the alarm" button. •The temperature remote for outside synced immediately upon turning it on, so no troubles there. •Also the screen of the alarm clock can be set to be full brightness or three other dimmer settings, in case it's too bright for you at night. Cons: •not much to complain about here. My only trouble is that the clock does the whole atomic clock thing where it sets itself using radio waves. Unfortunately where I have it in my basement it can't get those radio waves, so it won't set itself. Not a fault of the clock, more a problem of where I installed it. But it isn't a big issue for me, since you can set the clock manually also. Overall, love this clock and since my kids are now begging for one, Christmas will be easy this year!

We bought this as a projector clock for our bedroom. It projects the time and both inside and outside temperatures, which is really useful. The display on the clock itself has multiple brightness levels. We had to set it to minimum, as higher levels lit up the bedroom like a flashlight. At low level the screen is still visible by day, but only just. The clock displays inside and outside humidity on the screen, which is very useful. I would have given this 5 stars, but I dropped one as the outside sensor is not waterproof. It stopped working after a rainy night, although it did start again after I dried it out. I have had to relocate it to a very sheltered spot outside, where it now works well. The clock updates itself from the atomic clock in Boulder CO every now and again. You can tell when it does this as the projector switches off for a few minutes. Overall we are very pleased with this device.

Working well...happy with our purchase.

I'm a sucker for a weather station that gives me the temperature at the base and reads at least one out door sensor, so I was excited about this one that does all that and has an atomic clock and projects a display to a nearby wall, ceiling or other flat surface. PROs * Pairs well with the outside sensor, doesn't lose connection * Bright, easy to read display on the base unit * Reasonably intuitive setup buttons * When the projected display works, it's cool CONs * Never really worked with the atomic clock. It failed after a long attempt and eventually I had to set it manually. I left the atomic clock on wondering if it would work at some point, but found out when the time changed for "fall back", it clearly wasn't working I had to set the time manually. By that point it was already off by about a minute so I sensed the atomic clock wasn't working. Though I must say losing only 1 minute in 10 months isn't bad * After only 9 months of use, the projected display is now so dim that it's just not readable, even in a room with low light. I tried cleaning the lens and power cycling the unit, but it didn't help. OVERALL It's about as good as any other weather station that doesn't have the sexy add-ons I bought it for so I won't replace it.... at least until I find another shiny new object with an attractive feature set beyond the standard.

So far so good. Temperature runs 1-2 degrees low but not an issue. Projection is bright and clear on wall at 17 feet or ceiling at 9 feet. Set manually at first and it was one minute off. Atomic clock has not corrected it in 2 weeks. Overall we really like it.

So far, it works great! There are a lot of features, buttons, procedures etc. so the instructions are needed. The supplied manual is reasonably good, but there are few areas that are difficult to understand. Not a deal breaker by any means however. I bought it especially for the atomic clock, and as a replacement for my existing projection clock. The projection feature works good, --it projects both clock and indoor and outdoor temperatures which is nice. One disappointment is that the daylight saving feature has to be manually switched on and off when DST starts and ends. It's not a big deal, but a bit annoying as other units switch automatically. The atomic clock feature works very well on this unit, but requires that the projection feature shut itself off for 3 or so minutes while the clock is synchronizing at night. It's not a big deal, but it did catch me by surprise the first time I noticed it blank out.

Works great and has more features than we really need. Every night it randomly turns off for a minute or two. Besides that odd issue, it’s great.

This Newentor projection clock is a great item and more than I had expected. It is bright and precise with regard to keeping time and weather information. I had a warranty issue that was personally taken in hand and resolved in just a week. I highly recommend this weather clock. My experience was just wonderful. My customer service agent Janna, was so efficient and her communication skills were superb. I couldn’t be happier. John D

time on ceiling isn't very bright and the time didn't change automatically for daylight savings. This was my original problem but the company contacted me and this problem was solved. Now I have another problem. The clock will not keep time. I looked at it this morning and it was 1:30 and thought I had no sleep so checked my watch and it was actually 4 :30. This exact same thing happened twice this week. Then the clock decided to shut off by itself. It was plugged in and no one was near it and when I looked over the whole area was black. About 2 hours later the clock came back on all by itself but with the wrong time. I want to return this clock because there is no way that I can trust it to keep the right time or stay on. Very disappointed but definetly not worth paying for this clock.

It's not that big so you don't need a lot of space to put it in yet it does have a good size screen that you can see from a decent distance. The screen has a high resolution and a lot of color to it. It was relatively easy to set up, the instruction manual was easy to follow. I especially liked that the projection image changes between indoor/outdoor temperatures every couple of seconds. The definition quality of the projection on my ceiling is excellent. Well made, quality product.