The DigiFlow 8000T can monitor a single filter - flow volume or time elapsed. Users can program the flow volume and time by themselves. The DigiFlow 8000Twill count down from the programmed flow volume or time value, and generate an audible alert when it reaches the end. Besides this, the DigiFlow 8000T can display the REAL TIME flow rate. Two AAA alkaline batteries last for more than two years. The status is automatically memorized when the power is lost. It is designed mainly for residential and industrial water treatment applications. Features: Digital meter with ability to reset totalizing so users may track total flow in gallons. Offers ability to monitor five independent functions, with capacity settings from 100 to 9,900 gallons. (Stages that are not used can be disabled.) Audible alarm indicates cartridge replacement. Specifications: Range: 100 ~ 9900 Gallons 3/8" Nipple Pipe Thread (NPT) Port Recommended flow rate: 0.3 -2.0 Gallons per minute (GPM) Maximum flow rate capacity: 3.5 GPM Filter Life Monitor By Capacity and Elapse Time Real Time Flow Meter End of Filter Life Alert Large and Easy-to-read LCD Screen.
| Brand | Savant |
| Item Weight | 8.3 ounces |
| Package Dimensions | 4.17 x 3.5 x 2.4 inches |
| Is Discontinued By Manufacturer | No |
L**A
Very Accurate Flow meter
Very Accurate Flow meter, now i know exactly when to replace my filters
L**.
Make sure it works, I had to send one back for exchange
I like it, I use it to show my drinking water filter flow usage
S**Y
Works good
Works good.
M**O
Leaks like a sieve
Leaks like a sieve. Tried using no teflon tape, some teflon tape, more teflon tape, new fittings. Always leaks. Not a fan of plastic fittings. My metal ones are nice and dry.
L**N
Use on 1GPM or higher water. Use lots of Teflon tape.
This is rated for .3 to 2 GPM. I tested mine and it would only turn on if flow was greater than 1GPM. If i trimmed the flow back slowly it would drop to .66GPM then turn off. Its disappointing that it does not detect lower like is specified in the description and that the resolution of readings is so course.As others have mentioned this thing does not make a good fit and is prone to leaking badly from the threads. I was able to find a good combination that did work but it is ridiculous that this was necessary.Water tight seal:First find a male 3/8 NPT with a large shoulder. A plastic male 3/8 NPT to 3/8 quick-connect worked for me.Put an O-ring on the threaded side and push all the way back to the shoulder.Wrap Teflon tape around the threads 20 times. Tape thickness may vary but this is how many it took me.Screw it into this flow meter.About 3/4 of the way it starts getting too tight for your fingers and you will have to switch to wrench.Keep tightening it until the O-ring starts to get slightly squashed between the flow meter and the flange.Repeat for other side.
D**K
Will not read low flows
I didn't have issues with leaks, but it would not read flow as low as advertised. And it does not tell you how much water you have used, it counts backward from a set amount to tell you when you need to change a filter
A**R
Bad leaks!
Similar issues to others with it leaking. Tried teflon tape, thread sealant, plastic and brass fittings, still leaked pretty bad.
E**D
crap
It's a piece of crap it doesn't read its freezers It's a piece of s*** don't buy it
Trustpilot
Hace 2 semanas
Hace 2 meses
