Montech X3 Mesh Midi-Tower, DRGB, Tempered Glass -schwarz

I built my last computer 8 years ago and when it packed in I decided to salvage some parts (SSD and video card) and make a new budget build. My previous build was an ATX tower so going down to a Micro was a welcome change as it's about 30% smaller. I didn't really consult the documentation and went ahead with my build blind, so to speak. Overall I was immediately impressed with the quality of the case. It feels and looks high quality. The left side door is tempered class and swings out. If you lift up it comes off its hinge for easy removal (I actually didn't realise this and almost dropped it on the floor. Probably should have read the documentation). On the other side there's a removal panel which is secured by two screws with coverings on them so you can hand tighten them. The power supply has its own shroud, along with space for an old spinning hard drive (I repurposed my old 4tb WD drive) and enough room to tuck the wires. The fans and LEDs already come pre-rputed nice and neat with velcro ties going into a controller. As I worked on the build, I kept finding small attention to detail bits that made me impressed. For example, inside the main cavity there's an engraved Micro ITX & Mini ATX marking with a legend showing you where to put the separators for your motherboard. I'm not a fan of RGB so didn't buy an rbg motherboard, so the lights default to rainbow-ish without a controller. My kids loved it. There's plenty of access places to run cables combined with the shroud cavity means the build looks much neater than my previoys build. Speaking of my previous build the case was supposedly a "quiet" case with roam insulation etc. I've actually found this mesh case much, much quieter. I suppose this is because the airflow is better, the fans can run at a lower RPM and therefore are much quieter. My one slight complaint is that the cable for the fan controller, which you plug into the motherboard to control the fans, is very short nthe first time I powered on I actually missed it and as a result had stationary fans. I thought I may need to buy an extender cable, but I was able to undo the velcro tie which gave me enough length to then reach the proper slot on the motherboard so it was fine in the end. Overall I highly recommend this case if you're looking for a quality case at a good price.

Very good quality and features for the price, like wire grommets and a handle on the glass panel because it’s a door with hinges that doesn’t require unscrewing to open the panel. Also very good amount of capacity considering it’s an m atx case, it keeps it compact without sacrificing any major space. I bought this for my first pc build and so far it looks great, I just hope when it’s as good as it looks. It’s compatible with most modern gpus. Very nice 4 pre installed Argb fans for good cooling, it also comes with a dust mesh filter.

Great case, prefect for the budget build i was throwing together. For the price its great with 4 fans included and a fan hub. Cable management was easy and its included fans seems to be quite quiet which is good as i was concerned i would end up needing to replace them with others. Generally very easy to build in as evidenced by the fact that my partner was able to do it with minimal issue despite her never building a PC before.

Right of the bat this case impressed me by its looks. The 4 ARGB Fans look amazing and the design of the case is sleek and well built. The airflow appears to be very good, especially for this price point of about £50. The dust filters for the front panel, top and bottom of the case are easily removable (all magnetic) and the case has ample room to manage cables etc. My one and only gripe with this case is the 3 pin fan header cable is slightly too short and so to plug it in you need to bring some of the daisy chained fan cables down into view. Other than that, the case is fantastic and will definitely be buying this again!

Really nice case to build in, used this for my first and only ever PC build and was really simple with instructions and accessories. Fans are DC not PWM, but haven't noticed much noise from them or any sharp changes in fan noise either. I'm a big fan of the fan colour presets, no need to use the ARGB 5 pin. No complaints at all, great airflow and at a good price too.

Bought for £85. First time building a pc. This case (built weeks ago) is excellent quality, solid and light, beautiful glass, has correct locations for all screws/fixes, has three pre-installed front fans and a rear fan. Has two choices of easily-switched front faces. Colours are beautiful, and it's so light and pleasing to the eye! It's also got a power supply window (many cases don't!) so you can admire your PSU too. I underestimated how important both a case and a motherboard are to a computer build, and fortunately I picked well. The case is truly an excellent buy and I wouldn't pick any others!

Super cute compact tower, easy to clean and not too heavy!! Good cooling system too.

Very good quality case, so nice and easy to build in. Sorting out cable management in this case is so easy and has the velcro straps at the back to hold all the cables. Air flow is amazing.

Completo di tutto! Ben fatto. Gestione cavi molto semplice. Fornito di 4 ventole: 3 avanti e 1 dietro gestibili in velocità e colore dalla mobo volendo tramite l'hub ventole stesso di cui è provvisto. Soddisfatto. Forse è leggermente sovraprezzato ma va bene. Design molto minimal! Non trovo difetti da riportare: forse il fatto che le porte dove va ancorara la scheda video vanno spezzate(?)

Purchased as many as I could on sale for my home business and couldn't be happier with the quality!

Gabinete bom pelo custo benefício. Embora seja compacto e facil e tranquilo instalar e montar as peças no gabinete. Tudo pensado e projetado para uma melhor organização dos fios. Muito bom

I've personally built more than 15 computers, but i can say this will be a very nice case for a beginner. There's lots of room for cables and overall, i couldn't find any flaw's like every other case has. I just wish it was a little cheaper, i paid 60 euro but i would use it again. By the way, you can change the colors, there is a button up at the top and there are lots of colors to choose from.

Purchased for $80 Candian ($60ish USD). The case looks really good because of the 6 RGB Fans. Rare to see a company include so many fans for such a cheap price. I used a Micro-ATX Motherboard and it looks fantastic in my opinion. The quality of the case is good and the tempered glass is also thick and heavy. The front IO is decent with 2 USB2.0, 1 USB3.0 and a headphone jack. There is also a reset button and power button. The case fans are not customizable but set to the rainbow effect in the picture but I love the way it looks. The fans can be turned off. A downside is the fans are molex powered. Would have been nice to see sata powered fans.