Mount-It!Single Monitor Arm Desk Mount | Gas Spring Monitor Arm | Full Motion Articulating Height Adjustable | Fits 21 22 23 24 27 30 32 Inch VESA Compatible Computer Screen | Clamp and Grommet Base

I have very heavy monitors at work. I have tried and failed to get good stands in the past. I bought a similar model, but for 30 pound monitors that worked awesome. So I decided to get this single arm version for my home monitor because I only have a single 23 inch monitor. So I got the lighter arm. However, this is not a cheap product. It is heavy duty steel, and is easy to put together. I’ve only used it for a couple weeks at home, but I’ve been using the dual arm monitor at work for several months. In both cases, it is working great! I highly recommend this product for correctly sized monitors. Please make sure your monitor is not too heavy, and when you get it, definitely read the instructions carefully so you can properly balance the spring in these arms.

I've had the Mount-It! dual arm mount for quite some time, but I decided I wanted to go in a slightly different direction as the one downside to the dual mount system is an inability to adequately line up monitors with different bezel sizes to my liking. This is no fault of the previous mount, just me being a bit mildly OCD about getting my screens lined up. I also figure to be adding screens in the future so I wanted to try and find something that was a bit more flexible. I put this up against the Vivo single arm mount to see if one was better and this one is pretty good.It's easy to put together and easy to install a monitor to it. Rather than try to attach the monitor to the VESA mount while attached to the arm, this one has you attach the mount to the monitor, then slide it into a retention clip on the end of the mount. This makes placing and removing the monitor extremely easy if you need to make any adjustments to the actual monitor arm on your desk. The whole arm feels very sturdy, much more than the Vivo did and is able to hold much larger and heavier displays. It can hold up to 32" monitors, including ultra wide monitors as long as the weight doesn't exceed 20lbs.In the weeks since installing this arm, there has been no sag at all. The only issue I've encountered is there's a fair amount of shaking when even just typing, although I attribute this more to the desk not have a ton of support in the front. Either way, it's there and it's noticeable, particularly during extended typing sequences like this. So far that's the only drawback that I've encountered and again, could just be the desk.Overall, it feels very solid, holds my 24" AOC monitor up with no issues, and is definitely worth the price you pay for it.

I have 2 of these mounts 1 black and 1 silver. 1 has a 32" Samsung odyssey g5 and the other a 27" msi monitor. The arm tension is easily adjusted on the and goes up high enough to support both monitors without any bleed off over time. Adjustments are easy as far as height and left to right movement. The only issue these really have is the monitor up and down pivot. You have to tighten them pretty tight to not have the monitor tilt downwards and at that point its hard to pivot the monitor without loosening the bolt again. You can force it but it takes some effort. The clamp mount for the desk works just fine I used 3m automotive molding double back tape to keep the mounts from moving once in desired position some on the base of mount and some on the top of metal compression pad they are rock solid. For the price I can't complain.

I bought a monitor arm from Mount-it about a year ago and have had no issues, so I thought I would give them another go and have not been disappointed. The arm has a decent reach and easily holds my 27" monitor. Its range of motion is good and hasn't required any re-tightening.The assembly takes some work, but with average DIY skill a person should be able to put one of these up in 1/2 an hour. IT DOES NOT COME WITH M4 SCREWS. You will need those to attach a monitor to the arm. M4 screws can be found at most hardware stores.The arm came with wall and desk mounting brackets. Mount-it instruction sheet was easy to understand and very helpful. This is the best monitor arm I've found in this size. The value for you dollar can't be beat.

The Mount-It brand is the one to get - these are amazing! I am not good at putting things together so it was difficult but for someone who has a knack for stuff like that I'm sure it's fine for them. I figured it out and it is AWESOME - sturdy, holds my monitor fine and I adjust it whenever I want to. I bought the 2-arm mount for 2 monitors, then this 1-arm mount for another monitor I added lately. I wish there was a way to mount it better on a desktop Varidesk, I had to mount them off to the side because of all the hardware they have for springs, etc under the top level of the Varidesk. But it holds both mounts and 3 monitors well. Definitely a well made product.

The Mount-It! Single Monitor Arm, with its touted gas spring mechanism and full motion articulation, unfortunately fell short in execution. The arm struggled to maintain the tension needed to hold my monitor at the desired height, leading to slow but consistent drooping over time. Adjusting the tension was no simple feat, and the arm emitted an unsettling creak when moved. Furthermore, the mounting clamp failed to grip the desk securely, causing slight wobbling during routine tasks. For an apparatus designed to provide stability and flexibility for monitor positioning, the Mount-It! arm was an unstable disappointment.

I've had this monitor arm for the past couple years and have had no issues. I have it mounted near the corner of my desk, fully outstretched to the center of my desk and it's holding up a 27" Asus monitor above my laptop. It's saved me a lot of desk space and works perfectly.

Works as described, looks solid, very convenient.

Its a must.

Leider funktioniert eine Bewegunsrichtung der Monitorhalterung nicht.Die Höhenverstellung funktioniert (nach Einstellung, Monitorgewicht <3kg, die Hebekraft des Arms musste deutlich erhöht werden).Die Schwenkfunktion funktioniert ebenfalls wie erwartet.Die Rotation des Bildschirms (Wechsel zwischen Quer- und Hochformat) funktioniert nicht. Nach kurzer Ursachenforschung ist auch klar wieso: das entsprechende Gelenk ist nicht verschraubt, sondern vernietet, und hierbei wurde zu viel Kraft aufgewendet.Bei der näheren Betrachtung des obersten Gelenks fiel zusätzlich auf dass dieses zu 100% aus Plastik besteht, die Lebensdauer der Neigefunktion ist also auch begrenzt.Zusätzlich besteht noch einiges Spiel im Befestigungsclip mit dem die Vesa-Basisplatte am Schwenkarm befestigt wird (auch dieser Clip besteht aus Kunststoff).Positiv anzumerken ist, dass die Kabelführung tatsächlich der Abbildung entspricht, die Kabel sind also tatsächlich großteils verdeckt.

Excelente producto y una súper atención