Speedball Model B Printing Press

Das ist ein robustes Gerät aus Metall zu einem erschwinglichen Preis und liefert für den Hobbybereich ausreichend gute Ergebnisse. Einige Übung ist schon erforderlich - das ist aber wohl mit jeder Druckpresse so. Lediglich ein Punkt Abzug für die etwas lange Lieferung.

Not strong enough for the job

I like this small hand press. I see mixed reviews online about it, and it is not going to satisfy someone who is looking for results similar to those found on something like a bigger, much more expensive etching press. But don't underestimate it. For small projects, using good inks, it yields a nice clear print for a great price. Best feature is the even pressure. I have now practiced with viscose block print ink for both fabric and paper, and with runnier textile paints. Good consistent results with all! But you have to make some minor adjustments. The best way to print is to lay your block "face up" on the memory foam pad. I print on linen and cotton and it is great for fabric. I can even do repeat prints on larger pieces of fabric with it. Also, it works best with either mounted lino, or good rubber stamps (pink Speedy Carve). I tried it on unmounted lino and did not get as good a result.. I think the thicker the block, the better the print. Some people complained that the bottom of the press will scratch their table surface or slide around. My solution for this is just put a piece of the rubbery shelf liner or rug grip stuff under it. It won't budge. Also, you might want to play around with the table height. You can get more leverage on the press at varying heights. It's all about how tall you are, probably. Tip: If you are still worried about a good clear print, you can also just use the press to adhere your print to the inked block. Once you've pressed your inked block and paper in the press , just slip the whole thing out from under pressing plate, and finish off your print with a baren or flat wooden spoon. The initial pressure gives a good start to the hand-printing process. There are two levels for the upper plate. I'm not sure why, as it seems the lower one is the only one that ensures a good print. Also, the printer is sturdy enough, but make sure to press without twisting the pressing arm. It's great! I recommend it, and with a little experimentation with inks and blocks, it yields excellent results for small projects.

Es mi primera prensa y me pareció muy buena, es sólida y funciona muy bien.

Arrived damaged! the adjustment bars were bent over sideways, the box was split down one side & had holes poked in it. Ordered my replacement, hopefully it will arrive ok ..